• 한국해양공학회지
• /
• 제26권4호
• /
• pp.15-22
• /
• 2012

In this research, the relationship between the bow shape and green water phenomenon on the bow deck of an FPSO was studied using an experimental method. A 140,000 DWT FPSO was used as the objective hull form in the present research. The incident waves were regular types. The heights were 1.0 and 1.5 times the freeboard, and the length was equal in size to LBP. The wave heights and pressures on the deck were measured in experiments. Model tests were performed to determine the effects of bow flare angles, bow shapes, and a forecastle deck. The free heave and pitch conditions were applied to the models in these experiments. From the results of the model tests, an optimized bow shape was designed, which was found to decrease the green water impact loading. The results of this research could be used as fundamental data in the design of a bow shape.

• 해양환경안전학회지
• /
• 제24권7호
• /
• pp.923-929
• /
• 2018

본 연구에서는 쌍동선체의 선수형상에 대해 일반적으로 적용되고 있는 재래식과 선수 돌출의 반전형 선수 형상에 대한 저항성능 및 항주자세를 수치해석을 통해 분석하고, 반전형 선수형상에 대해서는 모형시험을 통하여 수치해석과 비교분석하였다. 반전형 선수형상은 재래식 선수형상보다 선수 발산파 파정의 생성위치를 선미방향으로 이동시켜 개선된 조파현상을 보였으며, 저항 및 안정된 항주자세 결정에 효과적이며 선체 저항이 약 2.95 % 개선되었다. 반전형 선수형상에 대한 수치해석 및 모형시험 비교분석 자료는 향후 선형설계 활용에 유용할 것으로 판단된다.

• 대한조선학회논문집
• /
• 제48권2호
• /
• pp.99-106
• /
• 2011

The appearance of CSR changes the concept of the hull form design as well as structural design, since the application of CSR inevitably brings the lightweight increase of a ship. Keeping the original design constraints such as principal particulars, deadweight, and speed performance, designers have to increase the volume of the hull form. As a result, the entrance angle at bow end should become larger, which results in blunter waterline shape. For a slow and full ship having high $C_B$ more than 0.85, a new concept of bow shape has been required to alleviate the increase of wave-making resistance, since it is very difficult to improve waterline and frameline shape for such a full ship. In this paper a new bow shape of Capesize Bulk Carrier was developed to improve its wave-making characteristics without incompliance with the design constraints. For loading manual calculation, NAPA software was used. FLUENT6.3.26 and WAVIS1.4 were used to evaluate resistance performance of the subject hull forms. The newly designed hull form was tested at SSPA model basin for the final confirmation of resistance and propulsion performance of the ship. It was found that the new bow shape of a Capesize Bulk Carrier improved the resistance characteristics greatly compared to a conventional bulbous bow. The other benefits of new bow shape on the manufacturability were also investigated.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제11권2호
• /
• pp.723-735
• /
• 2019

This paper employs computational tools to investigate the cause of resistance reductions in calm water and waves of the sharp bow form compared to the blunt bow in 66,000 DWT bulk carriers. A more slender shape at the fore-shoulder without a bulbous bow is a prominent feature of the sharp bow. The blunt bow incorporates a bulbous shape. A two-phase unsteady Reynolds averaged Navier-Stokes equations have been solved; and a realizable k-ε model has been applied for the turbulent closure. The free-surface is obtained by solving a VOF equation. The computational results have been validated with model tests carried out at a towing tank. The pressure component of resistance in the sharp bow is reduced by 8.9% in calm water, and 6.4-12.7% in regular head waves. The frictional components of resistance in the sharp and blunt bows are largely the same.

• 대한조선학회논문집
• /
• 제50권5호
• /
• pp.273-281
• /
• 2013

In this paper, the effects of bow deck shape on the green water are studied by numerical and experimental method. Varying the deck shapes to triangular, elliptic and circular, the thickness and advancing velocity of green water leading edge are compared using numerical method. Also the motion, the pressure on the vertical wall and the height on the deck of green water are compared among the three bow deck shapes in the heave and pitch motion free condition by experimental method. To remove the effects of the difference of motions among the deck shapes, numerical simulations are performed varying the deck shape with the same motion. In the same motion condition, smallest impulsive pressure occurred in the condition of elliptic deck shape.

• 대한두개안면성형외과학회지
• /
• 제11권1호
• /
• pp.19-22
• /
• 2010

The author presents a new method for the formation of Cupid's bow and the vermilion tubercle by using the inferior-based lip skin flap in a secondary bilateral cleft lip deformity. The length of the flap includes the entire length of the previous upper lip scar. Both skin flaps are elevated and turned down toward the central part of the vermilion. The distant portion of the turned-down skin flaps are deepithelialized and trimmed according to the new shape of Cupid's bow. The deepithelialized portions of both flaps are buried under the central vermilion mucosa in order to create the vermilion tubercle. The advantages of the proposed procedure are; provision of a more natural shape of Cupid's bow, the lip length is increased, and the vermilion tubercle can be reconstructed at the same time. Therefore, this technique is best suited for a case of a bilateral absence of Cupid's bow combined with a short lip in a sufficient upper lip of a bilateral cleft lip deformity. The proposed procedure, however, should be avoided in the tight upper lip because of a great deal of tension on the donor.

• 대한조선학회논문집
• /
• 제49권1호
• /
• pp.6-13
• /
• 2012

As ocean resources in shallow water areas are being exhausted, deep sea development is becoming common these days. Therefore floating type offshore structures are more competitive than fixed type structures, and FPSO is the most popular one these days. FPSO's are generally operated in a specific region and positioned to meet mostly head or bow waves in order to reduce roll motions. However this makes these vessels more vulnerable to green water around the bow region, and therefore the bow shape must be properly designed to mitigate green water damage. In the present study, experimental results for three different FPSO bow shapes in regular head waves were analyzed and compared to each other. Also CFD computations were carried out as a sample validation case for the database built for CFD code validation.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2017년도 추계학술발표회
• /
• pp.259-259
• /
• 2017

• 대한조선학회 특별논문집
• /
• 대한조선학회 2005년도 특별논문집
• /
• pp.31-37
• /
• 2005

An attempt to improve the speed performance through the minimizing in wave resistance has been done by an application of gooseneck and no bulb type to bulbous bow for the DSME 78,500 Class LPG Carrier on the basis of the CFD calculation and comparatives model tests. The hydrodynamic characteristics according to the variation of the shape of Cp-curve, design load water line, frame line and bulbous bow that have an important effect on the wave resistance has been evaluated/calculated by ship-flow code. A wide variety in hull variation have been tried to have a good hull form with three types of fore-body hull forms mainly classified by the shape of bulbous bow. The speed performances for the three final hull forms with different bulbous bows have been evaluated through the model tests.

• 한국전산유체공학회지
• /
• 제21권3호
• /
• pp.55-63
• /
• 2016

Nowadays, large container ships are continually developed and that's why the bow and stern structural stability problems by slamming become a significant more and more. However, due to the complexity of slamming, it is difficult to consider those problems at the design stage. For this reason, we attempt numerical analysis through SNUFOAM by generating the bow and stern two-dimensional cross-sectional grid in WILS JIP experiment at KRISO. Unlike the conventional method for the computation time saving, by setting the inlet flow conditions referred to the model test, we analyzed the slamming without applying the grid deformation method. As a result, when the stern model, as in the previous studies, it was possible to obtain quantitatively the fluid impulse is close to the experimental results. When the bow model, we can found the change by the position of force sensors which are derived for the bulbous bow and obtained fluid impulse and flow shape at slamming similar to the model test.