• 수산해양기술연구
• /
• 제22권3호
• /
• pp.23-28
• /
• 1986

This paper describes on the measurement of the deck vibration produced by the main engine vibration of stern trawler MjS SAE-BA-DA (2,275GT, 3,600PS) while the ship is cruising and drifting. The obtained results are as follows; 1. The deck vibration level was the highest point at vertical line which pass main engine and the lowest point at vertical line which pass top bridge while the crusing. 2. The vibration source level of the main engine, screw shaft and screw propeller were respectively 110, 90 and 80% while the crusing. 3. The main deck vibration pressure level at the check points 2, 20, 30, 40, 60, 70, 80, 86m from the bow to stern was respectively 9, 8, 7, 10, 22, 45, 18, 23%. 4. The frequency distributions of the rr.ain engine, screw shaft, screw propeller vibration were from 3 Hz to 10 KHz, predominant frequency was 1 KHz, each vibration accelration the highest level were respectively 1. 3, 0.8, 0.5 $mm/s^2.$ 5. The predominant frequency distributions of the main deck, second deck, bridge deck and top bridge deck-s vibration were from 10 to 30 Hz, and each vibration accelration level were respectively 0.7, 0.05, 0.07, 0.04 $mm/s^2.$

• 어선
• /
• 제29권
• /
• pp.15-20
• /
• 1986

This paper describes on the measurement of the deck vibration produced by the main engine vibration of stern trawler MIS SAE-BA-DA (2,275GT, 3,600PS) while the ship is cruising and drifting. The obtained results are as follows; 1. The deck vibration level was the highest point at vertical line which pass main engine and the lowest point at vertical line which pass top bridge while the crusing. 2. The vibration source level of the main engine, screw shaft and screw propeller were respectively 110, 90 and 80% while the crusing. 3. The main deck vibration pressure level at the check points 2, 20, 30, 40, 60, 70, 80, 86m from the bow to stern was respectively 9, 8, 7, 10, 22, 45, 18, 23%. 4. The frequency distributions of the main engine, screw shaft, screw propeller vibration were from 3Hz to 10KHz, predominant frequency was 1KHz, each vibration accelration the highest level were respectively 1.3, 0.8, 0.5mm/$S^2$. 5. The predominant frequency distributions of the main deck, second deck, bridge deck and top bridge deck's vibration were from 10 to 30Hz, and each vibration accelration level were respe¬ctively 0.7, 0.05, 0.07, 0.04mm/$S^2$.

• 수산해양기술연구
• /
• 제23권2호
• /
• pp.8-8
• /
• 1987

1986년 8월 1일부터 8월 30일까지 완도, 목포, 흑산도 항로와 흑산도에서 제주항 항로상에서 해상이 잔잔한 날을 택하여 실습선 부산403호의 순항시와 표박시의 주기관과 각 갑판의 선수미선상에서의 주요장소에서의 진동과 소음준위를 측정하고 진동분석을 통하여 진동변위, 속도, 가속도를 비교·고찰한 결과를 요약하면 다음과 같다. 1. 진동과 소음압준위. 1) 주갑판상에서 진동과 소음준위가 가장 높은 곳은 주기관의 수직상면이고 가장 낮은 곳은 소음은 선교수직하, 진동은 선수부창고의 수직하면에서이다. 2) 주기관 cylinder head, 기관실 좌측, 축계관상부에서 순항시의 진동준위는 80, 67, 65dB이고, 소음준위는 각각 104, 87, 86dB이다. 3) 선교를 통과하는 수직선상의 진동준위는 최저갑판에서 60dB로 가장 높고, 선교갑판에서 55dB로 가장 낮으며, 소음준위는 compass deck에서 75dB로 가장 높고, 최저갑판에서 53dB로 가장 낮다. 4) 노천갑판에서 진동과 소음준위는 모두 보우트갑판에서 각각 65, 84dB로 가장 높고, 진동준위는 교실 위에서 51dB, 소음준위는 선수누갑판에서 57dB로 가장 낮다. 5)최저갑판의 진동과 소음준위는 모두 기관실에서 가장 높아 각각 65dB, 85dB이고, 선수부창고에서 가장 낮아 각각 54dB, 52dB이다. 진동준위와 소음준위를 비교하면 기관실을 중심으로 하여 선수쪽에서 진동준위가 높고, 선미쪽에서는 소음준위가 높다. 2. 진동분석 1) 진동변위는 주기관 cylinder head에서 100μm로 가장 크고, compass deck에서는 3μm로 가장 작다. 또 진동속도는 주기관 cylinder head에서 11mm/sec로 가장 빠르고, compass deck에서 0.07mm/sec로 가장 느리며, 이들은 모두 100Hz 이상에서는 급격한 감쇄를 보였다. 2) 진동가속도는 주기관 cylinder head에서 중심주파수 1KHz, 1.1mm/sec 상(2) 로 가장 빠르고 compass deck에서 30Hz, 0.05mm/sec 상(2) 로 가장 느리다.

• 수산해양기술연구
• /
• 제23권2호
• /
• pp.54-60
• /
• 1987

1986년 8월 1일부터 8월 30일까지 완도, 목포, 흑산도 항로와 흑산도에서 제주항 항로상에서 해상이 잔잔한 날을 택하여 실습선 부산403호의 순항시와 표박시의 주기관과 각 갑판의 선수미선상에서의 주요장소에서의 진동과 소음준위를 측정하고 진동분석을 통하여 진동변위, 속도, 가속도를 비교.고찰한 결과를 요약하면 다음과 같다. 1. 진동과 소음압준위. 1) 주갑판상에서 진동과 소음준위가 가장 높은 곳은 주기관의 수직상면이고 가장 낮은 곳은 소음은 선교수직하, 진동은 선수부창고의 수직하면에서이다. 2) 주기관 cylinder head, 기관실 좌측, 축계관상부에서 순항시의 진동준위는 80, 67, 65dB이고, 소음준위는 각각 104, 87, 86dB이다. 3) 선교를 통과하는 수직선상의 진동준위는 최저갑판에서 60dB로 가장 높고, 선교갑판에서 55dB로 가장 낮으며, 소음준위는 compass deck에서 75dB로 가장 높고, 최저갑판에서 53dB로 가장 낮다. 4) 노천갑판에서 진동과 소음준위는 모두 보우트갑판에서 각각 65, 84dB로 가장 높고, 진동준위는 교실 위에서 51dB, 소음준위는 선수누갑판에서 57dB로 가장 낮다. 5)최저갑판의 진동과 소음준위는 모두 기관실에서 가장 높아 각각 65dB, 85dB이고, 선수부창고에서 가장 낮아 각각 54dB, 52dB이다. 진동준위와 소음준위를 비교하면 기관실을 중심으로 하여 선수쪽에서 진동준위가 높고, 선미쪽에서는 소음준위가 높다. 2. 진동분석 1) 진동변위는 주기관 cylinder head에서 100$\mu$m로 가장 크고, compass deck에서는 3$\mu$m로 가장 작다. 또 진동속도는 주기관 cylinder head에서 11mm/sec로 가장 빠르고, compass deck에서 0.07mm/sec로 가장 느리며, 이들은 모두 100Hz 이상에서는 급격한 감쇄를 보였다. 2) 진동가속도는 주기관 cylinder head에서 중심주파수 1KHz, 1.1mm/sec 상(2) 로 가장 빠르고 compass deck에서 30Hz, 0.05mm/sec 상(2) 로 가장 느리다.

• 한국항해학회지
• /
• 제13권2호
• /
• pp.37-55
• /
• 1989

When a ship is sailing on the sea, she has the six-degrees of freedom of motion. It means that she meets a lot of dangerous situations. Especially, when the VLCC is travelling in irregular sea, the slamming, the deck-wetness and the propeller racing are occured with the sea state she is on. These are the representative steps that a heave-to and a scudding are used for a ship building , but for a predominance in both. The author intends to clarify this problem theoretically. The methods of statistical calculation are based with the ITTC spectral formulation and with the assumption that the wave height histogram follows the Rayleigh distribution. In this study, the author gives an attention on the relative bow motion to a wave in the irregular sea. It is verified that the relative diplacement at the bow to sea level in the following sea is less than that in the head sea. It is confirmed that, therefore, one have to sail with scudding when he is threatened to heave-to at a rough sea. But he must bear the propeller racing in mind in the cases.

• Selected Papers of The Society of Naval Architects of Korea
• /
• 제1권1호
• /
• pp.37-44
• /
• 1993

Deck wetness phenomenon has long been considered as one of the factors that degrade the performance of a ship In waves. In rough weather, the frequent skipping of water may give rise to the capsizing of the ship. Therefore an appropriate above water bow shape design is an important asset to a ship of which successful performance in rough weather is a prerequisite such as a warship. In this paper an experimental technique for estimation of deck-wetness frequency is presented. The results of the model tests are compared with those of computations using Ochi's formula. Finally the applicability of Ochi's formula is discussed.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2002년도 춘계학술대회논문집
• /
• pp.145-153
• /
• 2002

A coastwise chemical tanker sailing at full speed has capsized in calm water and whole turing. In the precious paper, we investigated reasons of the accident by demonstrating the proper correction for the free surface effect of the liquid cargo and the bow-sinkage effect. In this paper, we also carry out model experiments of a transverse pressure under the seawater and an outward heel moment according to the heel angle and rudder angle, on the basis of radius of turning circle, ship's speed and drift angle of model ship occurring in turning. It is also shown that the flooding of seawater onto the deck occurring in turning generated a significant outward heel moment and the vertical distance between the center of gravity of the ship and the renter of lateral water drag.

• 해양환경안전학회지
• /
• 제7권3호
• /
• pp.17-28
• /
• 2001

The wheelhouse front glass of a Fore-Bridge-Ship (Ro-Ro Ship) was broken by the shipping of water in rough seas, and then the flooding of seawater into the wheelhouse caused the uncontrollable condition of the ship. The hull which was entered into the floating condition rolled severely, and the heavy rolling caused secondary damage such as the collapse of a lot of cargo. It was an incredible accident because the height of bow freeboard was about 2.5 times higher than the standard height of minimum bow freeboard regulated by the International Load Line Convention(1966). And it would be also difficult for navigators to imagine a great deal of seawater flooding into the wheelhouse because the front glass was positioned at about 20m height above the sea surface. In this paper, we carried out the evaluation for the safety navigation of the Fore-Bridge-Ship numerically against ship's speed and encountering angle to the wave in each sea state of rough sea, by using the integrated seakeeping performance index (ISPI) which is able to evaluate synthetically the safety operation of ships. And then the problem on the application of the past criteria proposed as the safety navigation of a merchant ship was clarified by inquiring the dangerousness of the shipping of water at her bow deck, which caused the breakage of the wheelhouse front glass.

• 수산해양기술연구
• /
• 제35권1호
• /
• pp.11-18
• /
• 1999

In order to secure accuracy and effectiveness of the electromagnetic compass as information sensor for ship's head up bearing with gyro compass, magnetic compass and electromagnetic compass on the sea and on the dock in land.The results obtained were as follows;1. Between the Northeast and the southsouthwest the deviation on ship's head up bearing on electromagnetic compass got easterly deviation with max. $53^{\cire}$on the East and between the Southwest and the Northnortheast westerly deviation with max. $34^{\cire}$ on the Northwest, of which values were not able to be corrected due to the angle excess of deviation adjustment.2. The varies of deviation seemed to have a tendency to increase easterly deviation on the Northeast and the East, easterly deviation after westerly deviation between the South and the Northwest, small one on the North and the Southeast.3. The varies of deviation of ship were larger than the one of around the dock, were extreme on the bow of forecastle deck and were stable on the ship's center line of compass deck at the dock in land.

• 한국해양공학회지
• /
• 제29권4호
• /
• pp.300-308
• /
• 2015

With the increases in oil and gas prices, and energy consumption, drillship construction has increased during the last decade. A drillship using a dynamic positioning (DP) system to maintain its position and heading angle during drilling operations. In addition, a drillship is equipped with a moonpool structure to allow its drilling systems to be operated in the midship section. A drillship for the North Sea is specially designed to endure harsh environmental loads. For safe operation in the North Sea, the drillship should have good motion response and robust hull strength. A break water should be considered on the bow and side deck to prevent the green water on deck phenomenon from incoming waves. In addition, the moonpool should be designed to reduce the speed loss and resonance motion. In this study, the hydrodynamic characteristics of a drillship for the North Sea were examined in relation to the motion, wave loads, green water, and moonpool resonance in the initial design stage.