• 대한기계학회논문집B
• /
• 제23권10호
• /
• pp.1229-1239
• /
• 1999

A computational study on unsteady compressible flows has been performed by adopting a low Reynolds number $k-{\omega}$ turbulence model in conjunction with dual time stepping scheme. An explicit four-stage Runge-Kutta scheme for the Navier-Stokes equations and an approximate factorization scheme for the $k-{\omega}$ turbulence model equations are used. Computational results obtained for blade surface pressure distributions in the process of rotor-stator interaction in a turbine stage are in good agreement with extant experimental data. The effects of the wake from the stator on the boundary-layer transition over the rotor blade surface are discussed by showing that high intensity turbulence of the stator wake induces an early transition.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.475-480
• /
• 2001

The flowfield of transverse jet in a supersonic air stream subjected to shock wave turbulent boundary layer interactions is simulated numerically by Generalized Taylor Galerkin(GTG) finite element methods. Effects of turbulence are taken into account with a two-equation $(k-\varepsilon)$ model with a compressibility correction. Injection pressures and slot widths are varied in the present study. Pressure, separation extents, and penetration heights are compared with experimental data. Favorable comparisons with experimental measurements are demonstrated.

• 한국가시화정보학회지
• /
• 제5권2호
• /
• pp.56-63
• /
• 2007

Flow visualization and aerodynamic characteristics of delta wings with two different leading edge geometries are investigated by PIV system and wind tunnel balance when the Reynolds number is about based on the freestream velocity and the root chord length. Delta wing models have 65-deg swept angle, and the leading edge shapes are divided into round- and sharp- type. The experimental results indicated that the leading-edge vortex strength and aerodynamic coefficient in the round leading edge are stronger and more, respectively than those in the sharp one. Therefore the flow interactions between vortices and the boundary layer are more desirable or more rapidly swirled in the round-type leading edge.

• International Journal of Aeronautical and Space Sciences
• /
• 제5권2호
• /
• pp.9-17
• /
• 2004

In this paper, a small supersonic wind tunnel was designed and built to studythe flow characteristics of a supersonic impulse turbine cascade by experiment. Theflow was visualized by means of a single pass Schlieren system. The supersoniccascade with 3-dimensional supersonic nozzle was tested over a wide range ofpressure ratio. Highly complicated flow patterns including shocks, nozzle-cascadeinteraction and shock boundary layer interactions were observed.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1732-1737
• /
• 2004

In this paper, a small supersonic wind tunnel is designed and built to study the flow characteristics of a supersonic impulse turbine cascade. The flow is visualized by means of a single pass Schlieren system. The supersonic cascade with 3-dimensional supersonic nozzle was tested over a wide range of nozzle installation angle. Highly complicated flow patterns including shocks, nozzle-cascade interaction and shock boundary layer interactions are observed.

• 한국추진공학회지
• /
• 제8권4호
• /
• pp.1-8
• /
• 2004

본 연구에서는 초음속 충동형 터빈 익렬의 유동특성을 알아보기 위해 소형 초음속 풍동을 설계하였으며 Single pass Schlieren system을 이용하여 유동을 가시화하였다. 실험은 3차원 초음속 노즐과 익렬을 조합하여 노즐 설치각에 따라 실시하였다. 실험을 통해 충격파를 포함한 복잡한 유동 형태와 노즐-익렬, 충격파-경계층 상호작용 등을 관찰할 수 있었다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.807-812
• /
• 2004

In this paper, a small supersonic wind tunnel was designed and built to study the flow characteristics of a supersonic impulse turbine cascade by experiment. The flow was visualized by means of a single pass Schlieren system. The supersonic cascade with 3-dimensional supersonic nozzle was tested over a wide range of pressure ratio. Highly complicated flow patterns including shocks, nozzle-cascade interaction and shock boundary layer interactions were observed.

• 한국해양공학회지
• /
• 제8권2호
• /
• pp.31-37
• /
• 1994

3-Dimensional panel method is now developed to the level that one can calculate the lift of a three dimensional body with the same accuracy of wind tunnel test and some current codes can consider the boundary layer effects due to the viscosity and unsteady motion in the calculation of lift. This paper is also aimed to develop these kinds of computing programs, and as a beginning, the authors restricted the problems to the steady potential flow cases. The calculation of 3-Dimensional body, wing and tandem wing carried out, using source panel and vortex ring panel. Finally, the interactions between 3-Dimension symmetric body and a wing are also calculated.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제23회 추계학술대회 논문집
• /
• pp.99-108
• /
• 2004

본 연구에서는 초음속 충동형 터빈의 유동특성을 알아보기 위해 소형 초음속 풍동을 설계하였으며 Single pass Schlieren system을 이용하여 유동을 가시화 하였다. 실험은 2차원 초음속 노즐과 익렬을 조합하여 압력비에 따라 실시하였다. 실험을 통해 충격파를 포함한 복잡한 유동 형태와 노즐-익렬, 충격파-경계층 상호작용 등을 관찰할 수 있었다.

• 해양환경안전학회지
• /
• 제24권1호
• /
• pp.92-100
• /
• 2018

난류경계층이 유지되기 위한 에너지 공급은 경계층 내 구조물인 와류들의 상호작용으로 끊임없이 이루어진다. 이러한 난류 유동은 수송분야의 마찰저항 및 해양구조물의 침식 및 진동을 유발하기 때문에 유동 제어를 위한 연구가 활발히 진행되고 있다. 이러한 제어의 극대화를 위해서는 난류 에너지 전달이 어떻게 이루어지는지에 대한 메카니즘 규명이 필수적이고, 이를 위해서는 층류경계층 내 유동현상으로 파악하는 것이 명확하고 용이하다는 장점이 있다. 따라서, 본 연구에서는 층류경계층 내 평판에 반구를 설치하여 역압력구배을 발생시킴으로써 교란된 유동현상의 상호작용을 분석하였다. 즉, 반구를 둘러싼 목걸이 와류와 반구 표면의 유동 박리에 의한 후류영역에서 머리핀 와류가 생성되어 상호 유기적으로 영향을 주고받는다. 이 과정에서 목걸이 와류는 후류영역으로 높은 운동량의 유체를 유입시켜 머리핀 와류의 발생 주파수를 증가시킨다. 반구 전방에 구멍을 뚫어 국부적인 흡입제어로 목걸이 와류의 와도를 감소시킴으로써 그 영향이 완화되는 과정을 유동 가시화 및 열선유속계로 측정하여 정성 및 정량적으로 분석하였다.