• Journal of Technologic Dentistry
• /
• v.20 no.1
• /
• pp.37-49
• /
• 1998

The specimens used were Ag-25 Pd-15 Cu ternary alloy and Au addition alloy. These alloys were melted and casted by induction electric furnace and centrifugal casting machine in Ar atmosphere. These specimens were solution treated for 2hr at $800^{\circ}C$ and were then quenched into iced water, and aged at $350{\sim}550^{\circ}C$ Age- hardening characteristics of the small Au-containing Ag-Pd-Cu dental alloys were investigated by means of hardness testing. X-ray diffraction and electron microscope observations, electrical resistance, ergy dispersed spectra and electron probe microanalysis. Principal results are as follows : Hardening occured in two stages, i.e., stage I in low temperature and stage II in high temperature regions, during continuous aging. The case of hardening in stage I was due to the formation of the $L1_0$ type face-centered tetragonal PdCu-ordered phase in the grain interior and hardening in stage I was affected by the Cu concentration. In stage II, decomposition of the ${\alpha}$ solid solution to a PdCu ordered phase($L1_0$ type) and an Ag-rich ${\alpha}2$ phase occurred and a discontinuous precipitation occurred at the grain boundary. From the electron microscope study, it was conclued that the cause of age-hardening in this alloy is the precipitation of the PdCu ordered phase, which has AuCu I type face-centered tetragonal structure. Precipetation procedure was ${\alpha}{\to}{\alpha}+{\alpha}_2+PdCu {\to}{\alpha}_1+{\alpha}_2+PdCu$ at Pd/Cu = 1.7 Ag-Pd-Cu alloy is more effective dental alloy as ageing treatment and is suitable to isothermal ageing at $450^{\circ}C$.

• Journal of Society of Preventive Korean Medicine
• /
• v.7 no.1
• /
• pp.17-28
• /
• 2003

We met results like the followings through the literatures and questionnaires about the tasks and solutions about the insurance fee of packed medical herbs. 1) It's turned out that 74.8% of herb doctors agrees to the insurance fee of packed medical herbs. However, in comparison with the same survey of the herb doctor association the percentage of general approval went somewhat lower, and especially the percentage of 'positive approval' became notably lower$(43.7%{\rightarrow}26.5%)$ and the percentage of 'active objection' raised about 2 times$(6.8%{\rightarrow}12.9%)$. Inquiring into the approval reasons on the insurance fee application of packed medical herbs some heads such as 'development toward treatment medical science' and 'decrease of publics burden' were higher than the one of 'management income and expenditure.' 2) As a result of the research, 36.0% of the patients and 42.8% of the residents recognized that the pay range of Chinese herb health insurance is narrow. They recognized that less people have the experiences of Chinese medical hospital use and internal application of the packed medical herbs as they are older, men rather than women. 85.4% of the patients and 74.9% of the residents agreed on the insurance pay of packed medical herbs. It's shown that they agree on the Chinese medical hospital use more as the economic standard is lower, on the insurance pay as they have ever taken the packed medical herbs. In the aspect of increase of insurance fee, 66.7% of the patients and 44.3% of the residents agreed on the insurance pay of packed medical herbs, and 18.1% and 36.1% disagreed on the insurance pay of packed medical herbs. The main objective reason why they disagree on the insurance pay of packed medical herbs was 'because the insurance fee goes up higher,' which answered 95.2% of the patients and 78.8% of the residents. 7.22% of the patients and 1.80% of the residents answered that they can pay more insurance fee in case of the insurance pay of packed medical herbs. However, in the priority order of the insurance pay, it hold the 5th position between 2 target research groups which was less than medical examination, charges for hospital accommodation and taking MRI. 3) According to the result of analysis about the cost of packed medical herbs, current practice price is 115,000 won and the average prime cost of a packed medical herb is 73,000 to 106,000 won. It's examined that the herb doctors regard that 95,000 won will be reasonable when the packed medical herb is payed in insurance. However, it was found out that the public generally thinks that the price would be appropriate on the level of 30,000 to 40,000 won and the percentage of the answers of 20,000 won to 30,000 was fairly high. 4) the central system of a prescription should be change into the central system of demonstration and the sick and wounded. 5) To solve this problem, the government should regulate it to pass by the circulation gradation of [importer, $peasantry{\rightarrow}manufacturer{\rightarrow}wholesaler{\rightarrow}distributor$(Chinese medical hospital, pharmacy dispensary of Chinese medicine)]And it should intervene into the quality and the circulation steps of Chinese medicine through 'the office or organization which is in charge of certification of Chinese medicine' and 'the office or organization which is in charge of the circulation of Chinese medicine.' And some actions such as simple severance, lavation, drying should be included into the conception of manufacture and the boundary between food and medical supplies should be made at a manufactory. And the regulation of standardized goods at one's own house should be improved so that, the peasantry can sell the materials of Chinese medicine only to the manufacturer. 6) In company with the insurance pay of packed medical herbs, the study about the separation of dispensary from medical practice in the Chinese medicine should be accomplished.

• Archives of design research
• /
• v.17 no.4
• /
• pp.241-250
• /
• 2004

In this research, the copper alloy plates C2200, C5210, C7701, C8113 were selected to make datum and to identify further usage of metal craft experimentation. For its experimentation, the general welding and TIG welding methods were researched; for 2nd experimentation, the Reticulation and Electroforming skill's differences in color and temperature were researched. With these methods 3 different kinds of works are introduced for sample studies. For this research, Dr. Lee, Dong-Woo who works in Poongsan Metal Co, supported 4 kinds of copper alloy metals. Which are Commercial bronze (Cu-Zn), Deoxidiged Copper(Cu-Sn-P), Nickel Silver (Cu-Ni-Zn), and White Bronze (Cu-Ni); they were applied partly and wholly by the method of Laminatin, Reticulation, Fusing, and Electroforming skills. In case of C2200, the brass, the A. C. TIG welding method is better under 2mm slight plate; the D.C. TIG welding is better upper 2mm plate; and 250~300$^{\circ}C$ is recommended for remain heat treatment. In case of C5210, not having Hydrogen in high temperature return period, doesn't need Oxygen in high temperature and hardening in comparative high temperature neither, it is good for welding. It contains Sn 2-9% ad P 0.03-0.4% generally; and in accordance with the growth rate of Sn contain amount, the harden temperature boundary become broad. In case of cold moment after welding, they are recommended that higher speed TIG welding, smaller melting site and less than 200$^{\circ}C$ for pre-heating temperature. In case of C7701, the 10-20% Ni, 15-30% Zn are widely used.. If it is upper 30% Zn, it become (${\alpha}+{\beta}$) system and adhesive power rate become lower, and the productivity become lower in low temperature but the productivity become higher in high temperature. Nickel Silver's resistance of electricity is well; and the heatproof and incorrodibility is good, too. Lastly, in case of C8113, good at persistence in salty and grind; high in strength of high temperature. In case of white brass, contain 10-30% Nickel and hardened in high temperature and become single phrase. For these reason, the crystallization particles easily become large, if the resistance become higher small amount of Pb, P, S separation rate become higher.

• Korean Journal of Environmental Agriculture
• /
• v.31 no.2
• /
• pp.104-112
• /
• 2012

BACKGROUND: Agricultural inputs (fertilizer and organic inputs) and water conditions can influence $CH_4$ and $CO_2$ emission from agricultural soils. This study was conducted to investigate the effects of agricultural inputs (fertilizer and organic inputs) under changing water regime on $CH_4$ and $CO_2$ emission from a soil in a laboratory incubation experiment. METHODS AND RESULTS: Four treatments were laid out: control without input and three type of agricultural inputs ($(NH_4)_2SO_4$, AS; pig manure compost, PMC; hairy vetch, HV). Fertilizer and organic inputs were mixed with 25 g of soil at 2.75 mg N/25 g soil (equivalent to 110 kg N/ha) in a bottle with septum, and incubated for 60 days. During the first 30-days incubation, the soil was waterlogged (1 cm of water depth) by adding distilled water weekly, and on 30 days of incubation, excess water was discarded then incubated up to 60 days without addition of water. Based on the redox potential, water regime could be classified into wetting (1 to 30 days), transition (31 to 40 days), and drying periods (41 to 60 days). Across the entire period, $CH_4$ and $CO_2$ flux ranged from 0 to 13.8 mg $CH_4$/m/day and from 0.4~1.9 g $CO_2$/m/day, and both were relatively higher in the early wetting period and the boundary between transition and drying periods. During the entire period, % loss of C relative to the initial was highest in HV (16.4%) followed by AS (8.1%), PMC (7.5%), and control (5.4%), indicating readily decomposability of HV. Accordingly, both $CH_4$ and $CO_2$ fluxes were greatest in HV treatment. Meanwhile, the lower $CH_4$ flux in AS and PMC treatments than the control was ascribed to reduction in $CH_4$ generation due to the presence of oxidized compounds such as ${SO_4}^{2-}$, $Fe^{3+}$, $Mn^{4+}$, and ${NO_3}^-$ that compete with precursors of $CH_4$ for electrons. CONCLUSION: Green manure such as HV can replace synthetic fertilizer in terms of N input, however, it may increase $CH_4$ emission from soils. Therefore, co-application of green manure and livestock manure compost needs to be considered in order to achieve satisfactory N supply and to mitigate $CH_4$ and $CO_2$ emission.

• Journal of Technologic Dentistry
• /
• v.19 no.1
• /
• pp.21-35
• /
• 1997

The Ag-Pd-Cu alloys containing a small amount of Au is commonly used for dental purposes, because this alloy is cheaper than Au-base alloys for clinical use. However, the most important characteristic of this alloy is age-hardenability, which is not exhibited by other Ag-base dental alloys. The specimens used were Ag-20Pd-20Cu ternary alloy and Au addition alloy. These alloys were melted and casted by induction electic furace and centrifugal casting machine in Ar atmoshpere. These specimens were solution treated for 2hr at $800^{\circ}C$ and were then quenched into iced water, and aged at $350{\sim}550^{\circ}C$ Age-hardening characteristics of the small Au-containing Ag-pPd-Cu dental alloys were investigated by means of hardness testing, X-ray diffraction and electron microscope observations, electrical resistance, differential scanning calorimetric, emergy dispersed spectra and electron probe microanalysis. Principal results are as follows : Hardening occured in two stages, I. e., stage I in low temperature and stage II in high temperature regions, during continuous aging. The case of hardening in stage I was due to the formation of the Llo type face centered tetragonal PdCu-ordered phase in the grain interior and hardening in stage I was affedted by the Cu concentration. In stage II, decomposition of the $\alpha$ solid solution to a PdCu ordered phase(L1o type) and an Agrich ${\alpha}2$ phase occurred and a discontiunous precipitation occurred at the grain boundary. Form the electron microscope study, it was concluded that the cause of age-hardening in this alloy is the precipitation of the PdCu ordered phase, which has AuCu I type face-centered tetragonal structure. Precipitation procedure was ${\alpha}\to{\alpha}+{\alpha}2+PdCu\to{\alpha}1+{\alpha}2+PdCu$ at Pd/Cu = 1 Ag-Pd-Cu alloy is more effective dental alloy as ageing treatment and is suitable to isothermal ageing at $450^{\circ}C$.

• Journal of Korean Philosophical Society
• /
• v.116
• /
• pp.411-435
• /
• 2010

Ken Wilber(1949~) tries to approach integration of philosophy, emphasising the advent of the perennial philosophy in the exchange of scholarships at the present day. He suggests All Quadrant(四象限) for the first step to reach his integrated approach. In addition, his approach concretizes for AQAL(All Quadrant, All Level). His AQAL approach which can be divide into inside/outside, singular/plural, or interobjectivity/intersubjectivity is applied to a lot of fileds such as ecology, management, criminology, medical treatment and its boundary is getting bigger. The merits of Quadrant is that it can solve the problem of the plain(平原), which resolves the strength of subjective interior(cultural contexts) into the external existence(social system). From view of Dongmu Lee Je-ma(1837~1900), a former philosopher, Sa-Sang theory['Affairs-Mind-body-Objects(事心身物)', 'Heaven-Human-nature-Order(天人性命)] is in accord with Wilber in content. In Dongmu's writing, Quadrant(Affairs-Mind-body-Objects') called Sa-Sang theory(四象學) or Sasang Constitional Medicine(四象醫學) is basic component in order to explain the structure of all nature. 'Heaven-Human-nature-Order'; That is, 'Affairs-Mind-body-Objects' results in 'Heaven-Human-nature-Order' focused on human being(human body) in the universe. In other words, Sa-Sang theory is the same as the Wilver's inclusive perspectives from the universe and human being. Dongmu's Sa-Sang theory is compared with C. G. Jung(1875~1961)'s psychology and it helps both fields confirm the foundation and extend the province of application. Comparision of Dongmu's Quadrant with Wilber's is not just analogical reasoning. In comparison, Dongmu's Sa-Sang theory is more delicated and crystallized than Wilber's in medical prospective. Dongmu regards Quadrant not as diseases, but as origin of Physiology and Pathology. And he explains all of their courses as Quadrant.

• Korean Journal of Heritage: History & Science
• /
• v.52 no.3
• /
• pp.74-93
• /
• 2019

The Bird Track Site in the Haman Formation in Yongsanri (Natural Monument No. 222) was reported on the named Koreanaornis hamanensis and Jindongornipes kimi sauropod footprint Brontopodus and ichnospecies Ochlichnus formed by Nematoda. This site has outstanding academic value because it is where the second-highest number of bird tracks have been reported in the world. However, only 25% of the site remains after being designated a natural monument in 1969. This is due to artificial damage caused by worldwide fame and quarrying for flat stone used in Korean floor heating systems. The Haman Formation, including this fossil site, has lithofacies showing reddish-grey siltstone and black shale, alternately. The boundary of the two rocks is progressive, and sedimentary structures like ripple marks and sun cracks can clearly be found. This site was divided into seven formations according to sedimentary sequences and structures. The results of a nondestructive deterioration evaluation showed that chemical and biological damage rates were very low for all formations. Also, physical damage displayed low rates with 0.49% on exfoliation, 0.04% on blistering, 0.28% on break-out; however, the joint crack index was high, 6.20. Additionally, efflorescence was observed on outcrops at the backside and the northwestern side. Physical properties measured by an indirect ultrasonic analysis were found to be moderately weathered (MW). Above all, the southeastern side was much fresher, though some areas around the column of protection facility appeared more weathered. Furthermore, five kinds of discontinuity surface can be found at this site, with the bedding plane showing the higher share. There is the possibility of toppling failure occurring at this site but stable on plane and wedge failure by means of stereographic projection. We concluded that the overall level of deterioration and stability were relatively fine. However, continuous monitoring and conservation treatment and management should be performed as situations such as the physicochemical weathering of the fossil layer, and the efflorescence of the mortar adjoining the protection facility's column appear to be challenging to control.

• Journal of Korean Society of Forest Science
• /
• v.78 no.3
• /
• pp.287-301
• /
• 1989

A tree of Ailanthus altissima Swingle was fastened with a plastic band, 19mm wide, around the stem 180cm above ground level and was left to grow under this condition for one year, By removal of this band the tumorous tissue gradually developed and the tree bearing distinct tumorous tissue, an overgrowth surrounding the stem, was harvested two years after the band removal. For the investigation of this tumorous part and its comparison with adjacent normal parts in the anatomical features of individual elements, the tumorous part and parts directly and 40cm above and below the tumorous part were obtained from the tree. The tumor wood having remarkably wider growth increment occurred in the 3rd growth ring the first year after removal of the fastened band, and the barrier zone which delimited the discolored wood from the normal-colored wood inwards appeared u1 the intra-2nd growth ring produced during the fastened period in the tumorous part and the false ring-like zones equivalent to barrier Zone were shown in the normal-colored 2nd growth rings of the parts directly and 40cm above and below the tumorous part, as well. The tumor wood, the 3rd growth ring, and proportion of the 2nd growth ring formed after barrier zone in the tumorous part shared common characteristics in the irregular growth ring boundary, misshapen and shorter individual fibers and vessel elements, and large ray widths and heights. The springwood pores were smaller in diameter in the tumor wood, and the larger radial and smaller tangential diameters of summerwood solitary pores and individual pores consisting of pore multiples in proportion of the 2nd growth ring formed after the barrier zone were transformed into near-isodiametric in the tumor wood, the 3rd growth ring, in the tumorous part. Only in proportion of the 2nd growth ring formed after the barrier zone were transformed into near-isodiametric in the tumor wood, the 3rd growth ring, in the tumorous part, ray densities greatly increased. And the massive tumor wood was caused not by cell size but by cell number because the radial and tangential diameters of fibers in the tumor wood, the 3rd growth ring, in the tumorous part were not sufficiently different from those in the same aged growth rings of the directly and 40cm above and below the tumorous part.