• 한국산학기술학회논문지
• /
• 제15권5호
• /
• pp.3319-3326
• /
• 2014

Eosin yellow는 유용한 염료나 색소로 사용되지만 유해한 독성을 가진 물질이다. 본 연구에서는 활성탄을 사용하여 eosin yellow를 흡착하는데 필요한 흡착평형과 흡착동역학에 대하여 pH, 초기농도, 접촉시간 등을 변수로 하여 조사하였다. 등온흡착평형관계를 검토한 결과 평가된 Langmuir 상수값, $R_L$=0.067-0.083과 Freundlich 상수값 $\frac{1}{n}=0.237-0.267$로부터 활성탄에 의한 eosin yellow의 흡착조작이 적절한 처리방법이 될 수 있음을 알았고, Temkin 상수값, B=1.868-2.855 J/mol과 Dubinin-Radushkevich 식 상수값, E=5.345-5.735 kJ/mol로부터 흡착공정이 물리흡착공정임을 알았다. 흡착공정에 대한 동력학적 해석을 통해 반응속도식의 적용결과는 유사이차반응속도식이 유사일차반응속도식에 비해 일치도가 높은 것으로 나타났으며, 입자내확산식에 의해 흡착공정은 경계층확산과 입자내확산의 2단계로 진행되는 것을 알았다.

• 한국물환경학회지
• /
• 제34권6호
• /
• pp.678-687
• /
• 2018

The purpose of this study was to understand the unique and complicated feature of urban stream receiving various inflows. The Yangjae stream, the second tier of the Han River, runs through the southern parts of Seoul, Korea and its middle part flows on the boundary of Seoul where land use is actively changing. Stream flow was greatly influenced by rainfall. Other than rainfall events, effluent discharge from wastewater treatment plant (WWTP) comprised 51 % of stream flux. As a result, majority ions water chemistry was changed at the receiving zone of the discharged effluent (Zone A). Its contribution increased to 69.9 % at the second sampling period with low stream flow. In the middle zone, inflows from the northern area, recently developed to a residential district showed low $NO_3-N$ and high $HCO_3$, Ca, $SO_4$, and $SiO_2$ indicating the effects of groundwater and concrete. One inflow (T-8), with extremely high Na and Cl, median $SiO_2$, was assessed to have anthropogenic influence, however its contribution to main stream was under 1 %. Road construction near Y-13 also affected water chemistry leading to the highest Na and Cl concentration. These hydro chemical changes can be critically used to evaluate the changes in water budget and fate of chemicals in a peri-urban watershed occasioned by human activities on the Yangjae.

• 대한금속재료학회지
• /
• 제48권2호
• /
• pp.122-132
• /
• 2010

Higher strength and fracture toughness of reactor pressure vessel steels can be obtained by changing the material specification from that of Mn-Mo-Ni low alloy steel (SA508 Gr.3) to Ni-Mo-Cr low alloy steel (SA508 Gr.4N). However, the operation temperature of the reactor pressure vessel is more than $300^{\circ}C$ and the reactor operates for over 40 years. Therefore, we need to have phase stability in the high temperature range in order to apply the SA508 Gr.4N low alloy steel for a reactor pressure vessel. It is very important to evaluate the temper embrittlement phenomena of SA508 Gr.4N for an RPV application. In this study, we have performed a Charpy impact test and tensile test of SA508 Gr.4N low alloy steel with changing impurity element contents such as Mn and P. And also, the mechanical properties of these low alloy steels after longterm heat treatment ($450^{\circ}C$, 2000hr) are evaluated. Further, evaluation of the temper embrittlement by fracture analysis was carried out. Temper embrittlement occurs in KL4-Ref and KL4-P, which show a decrease of the elongation and a shifting of the transition curve toward high temperature. The reason for the temper embrittlement is the grain boundary segregation of the impurity element P and the alloying element Ni. However, KL4-Ref shows temper embrittlement phenomena despite the same contents of P and Ni compared with SC-KL4. This result may be caused by the Mn contents. In addition, the behavior of embrittlement is not largely affected by the formation of $M_3P$ phosphide or the coarsening of Cr carbides.

• Steel and Composite Structures
• /
• 제38권3호
• /
• pp.337-353
• /
• 2021

Micro-electro-mechanical systems (MEMS) are widely employed in sensors, biomedical devices, optic sectors, and micro-accelerometers. New reinforcement materials such as carbon nanotubes as well as graphene platelets provide stiffer structures with controllable mechanical specifications by changing the graphene platelet features. This paper deals with buckling analyses of functionally graded graphene platelets micro plates with two piezoelectric layers subjected to external applied voltage. Governing equations are based on Kirchhoff plate theory assumptions beside the modified couple stress theory to incorporate the micro scale influences. A uniform temperature change and external electric field are regarded along the micro plate thickness. Moreover, an external in-plane mechanical load is uniformly distributed along the micro plate edges. The Hamilton's principle is employed to extract the governing equations. The material properties of each composite layer reinforced with graphene platelets of the considered micro plate are evaluated by the Halpin-Tsai micromechanical model. The governing equations are solved by the Navier's approach for the case of simply-supported boundary condition. The effects of the external applied voltage, the material length scale parameter, the thickness of the piezoelectric layers, the side, the length and the weight fraction of the graphene platelets as well as the graphene platelets distribution pattern on the critical buckling temperature change and on the critical buckling in-plane load are investigated. The outcomes illustrate the reduction of the thermal buckling strength independent of the graphene platelets distribution pattern while meanwhile the mechanical buckling strength is promoted. Furthermore, a negative voltage, -50 Volt, strengthens the micro plate stability against the thermal buckling occurrence about 9% while a positive voltage, 50 Volt, decreases the critical buckling load about 9% independent of the graphene platelet distribution pattern.

• 한국임상수의학회지
• /
• 제39권5호
• /
• pp.272-276
• /
• 2022

An 8 month old leopard gecko (Eublepharis macularius) with a large nodule was referred to our hospital. During the physical examination, the nodule had an unclear boundary from the top of the left eye to the front of the left ear and prevented the opening of the left eye. A hard, cheese-like, yellow, pus-filled nodule was observed. A cytological examination of a pus swab sample revealed pyogranulomatous inflammation with rod-shaped bacteria. Ofloxacin was chosen as the empirical topical antimicrobial drug for treatment. The swab samples were inoculated in trypticase soy agar with 5% sheep blood and incubated at 37℃ for 24 h. Gram-negative bacteria were identified via Gram staining, and the Kirby-Bauer antimicrobial susceptible disk diffusion test against 24 antibiotics according to protocol M100-Ed32 of CLSI showed that the fluoroquinolone group (ciprofloxacin and enrofloxacin) was susceptible to the isolated bacteria. Molecular identification based on 16S ribosomal RNA gene sequencing confirmed that the isolated bacteria had a 99.85% nucleotide similarity with Serratia surfactantfaciens (GenBank accession no. CP014948). After 1 week, the boundaries of the nodule became clear; thus, the abscess was physically removed by expanding the hole formed above the eye for drainage, and flushing was repeated. After another 1 week, new tissue restoration without scarring was observed. This is a rare case report of the successful management of a subcutaneous abscess and scar-free healing in a lizard.

• Archives of Plastic Surgery
• /
• 제50권4호
• /
• pp.377-383
• /
• 2023

Background Squamous cell carcinoma (SCC) is the most common malignancy on the lower lip. Surgical excision, the standard treatment for SCC, requires full-thickness excision. However, no consensus exists about the appropriate surgical margin. Therefore, we investigated the appropriate surgical margin and excision technique by analyzing 23 years of surgical experience with lower-lip SCC. Methods We reviewed 44 patients with lower-lip SCC who underwent surgery from November 1997 to October 2020. Frozen biopsy was performed with an appropriate margin on the left and right sides of the lesion, and the margin below the lesion was the skin above the sulcus boundary. If the frozen biopsy result was positive, an additional session was performed to secure a negative margin. Full-thickness excision was performed until the final negative margin. In each patient, the total number of sessions performed, final surgical margin, and recurrence were analyzed. Results Forty-one cases ended in the first session, 2 ended in the second session, and 1 ended in the third session. The final surgical margins (left and right; n = 88) were 5 mm (66%), 7 mm (9%), 8 mm (2.3%), 10 mm (20.4%), and 15 mm (2.3%). During an average follow-up of 67.4 months (range, 12-227 months), recurrence occurred in one patient. Conclusion The final surgical margin was 5 mm in 66% (58/88) of the cases, and 97.7% (86/88) were within 10 mm. Therefore, we set the first frozen biopsy margin to 5 mm, and we suggest that a 5-mm additional excision is appropriate when frozen biopsy results are positive.

• 한국의사학회지
• /
• 제35권1호
• /
• pp.135-147
• /
• 2022

Sin Dae-woo was a scholar representing the Ganghwa School in the late Joseon Dynasty. He was Jeong Je-du's grandson-in-law and also in charge of organizing Jeong Je-du's collection of writings. His three sons had a particularly close relationship with their father, so even when they published a collection of writings after his father's death, the names of the three were combined and marked as Jin-jak-shin. The records they left include Seokcheon Il-seung, who described the history of the family along with the collection of writings, Seongdo Il-rok, a diary of the time of Seongcheon Busa, and many letters exchanged over time. These records draw attention as they contain records of medical life, such as eye diseases that the family suffered, infectious diseases that caused many casualties, and Yakro (distilled herbal essence) that showed records of being used for treatment at the time. In this paper: 1) We examine the medicines, prescriptions, acupuncture, and medication used to treat eye diseases. 2) We carefully examine the epidemic, the responses of the parties to it, and the attitudes of those who stood at the boundary between death and life. 3) We look for clues to the use of Western-origin drugs called Yakro. Intellectuals of the time looked deeper into Lee Kyugyung's book and Seo Yu-gu's book on how they were reflected in Joseon's medical life. In conclusion, in the 18th and 9th centuries, we see that the influential families of the Ganghwa school freely brought in famous acupuncturists, used prescriptions that were included in medical books or not, and used Yakro from western origin that were not traditional methods of Joseon. Thus, we reveal that doctors of the Joseon had the capacity to pursue their medical life more actively and had open-minded exchanges than our existing perceptions.

• International Journal of Computer Science & Network Security
• /
• 제24권2호
• /
• pp.43-52
• /
• 2024

Medical imaginings assume a important part in the analysis of tumors and cerebrospinal fluid (CSF) leak. Magnetic resonance imaging (MRI) is an image segmentation technology, which shows an angular sectional perspective of the body which provides convenience to medical specialists to examine the patients. The images generated by MRI are detailed, which enable medical specialists to identify affected areas to help them diagnose disease. MRI imaging is usually a basic part of diagnostic and treatment. In this research, we propose new techniques using the 4D-MRI image segmentation process to detect the brain tumor in the skull. We identify the issues related to the quality of cerebrum disease images or CSF leakage (discover fluid inside the brain). The aim of this research is to construct a framework that can identify cancer-damaged areas to be isolated from non-tumor. We use 4D image light field segmentation, which is followed by MATLAB modeling techniques, and measure the size of brain-damaged cells deep inside CSF. Data is usually collected from the support vector machine (SVM) tool using MATLAB's included K-Nearest Neighbor (KNN) algorithm. We propose a 4D light field tool (LFT) modulation method that can be used for the light editing field application. Depending on the input of the user, an objective evaluation of each ray is evaluated using the KNN to maintain the 4D frequency (redundancy). These light fields' approaches can help increase the efficiency of device segmentation and light field composite pipeline editing, as they minimize boundary artefacts.

• Parasites, Hosts and Diseases
• /
• 제29권3호
• /
• pp.235-244
• /
• 1991

강원도 원주 지역 학등에 대하여 환경을 달리하는 4군을 adhesive cellotape anal swab 법으로 충란 검출률을 조사하였고 감염 집단에 대하여 구충제의 반착 투여로 감염률의 감소 현황과 재감염 을 관찰하였다. 1. 충란 검출률(1회 검사)은 19.9%(1,262명중 251명 양성, 남 19.7%, 여 20.1%)였으며 지역과 환경이 다른 산간 지역 13.0%, 농촌 지역 11.9%, 중 도시 15. l%, 집단생활 아동 61.9%로 나타났다. 2. 국민학생은 저학년(유치만 및 1,2학년생)에서 검출률(26.2∼32.2%)이 높았고 그 외는 최저 (6학년 생) 13.6%이었다. 3. 반복 검사(4∼5일 간격 3회)에 의한 누적 검출률은 높았으나(최초 58.5%에서 70.8%로) 매회의 검출률은 비슷한 비율(50.0%∼59.2%)을 보였다. 4. 반복검사 3회의 누적 검출률(70.8%, 130명 검사) 중 계속 양성자는 평균 39.2%이었다. 그리고 충란 검출률이 높은 군(87.5%)일수록 그 비율(71.9%)은 높았다. 5. 충란 양성자 17명에서 구충제 투여로 2,609마리 (성비는 12.4 : 1)의 충체를 수집하였다. 이는 평균 153마리 (4∼824범위) 감염에 해당된다. 6. 집단에 대하여 매회 충란 양성자에만 구충제를 투여 (3주간격 6회)한 바 양성률은 최초 54.8% (180명중)에서 15주 후에 2.3%로 감소되었으나 완전한 구충 효과는 얻지 못하였다. 그러나 매회 전 집단(양성자, 음성자 같이)에 대한 구충제 투여 (3주간격)에서는 4회 (9주째) 검사때 전부 음성으로 나타났다. 7. 국민학교 학생 양성자의 형제자매 중 충란 검출률은 70.0%(40명 중 28명)이었다. 가족 단위로는 69.7%의 같은 비율로 높았다. 이상으로 요충 감염은 아직까지 높은 상태임을 알았고 예방을 위한 집단 구충에는 전 집단에 대한 3회 이상의 반복구충이 효과적이었다. gas layers is also made. Low resolution spectral intensities at the boundary are obtained for uniform, parabolic and boundary layer type temeprature profiles using the obtained for uniform, parabolic and boundary layer type temperature profiles using the obtained WSGGM's with 9 gray gases. The results are compared with the narrow band spectral intensities as obtained by a narrow band model-based code with the Curtis-Godson approximation. Good agreement is found between them. Local heat source strength and total wall heat flux are also compared for the cases of Kim et al, which again gives promising agreement.면적 306~453$\textrm{cm}^2$, 유색계의 경우 수당면적 340~453$\textrm{cm}^2$ 일 때 경제능력을 제대로 발휘할 수 있고 경제성이 있는 것으로 나타났다. 첨가구가 높은 경향이 있었다8.4%. 79.7% 그리고 80.2%였다. 5. 체중구성요소들의 중상비율간의 상관근도는 계통간를 차이를 보이지 않았다. 체중구성요소중 체중과 상관정도가 높은 부위들은 방혈양, 두부, 각부, 흉부, 퇴경부등이였다. 복부지방(%)은 어느 계종에서나 주로 불가식내장과 높은 유의상관을 보였으나, 가식부위와의 상관정도는 매우 낮게 나타났다.ctivity of these

• 방사성폐기물학회지
• /
• 제5권1호
• /
• pp.39-52
• /
• 2007

사용후핵연료의 건식 재가공을 위한 핵연료 원격 제조공정중 분말제조를 위한 산화 및 OREOX(산화 환원공정)열처리 공정으로부터 $^{85}Kr$ 및 $^{14}C$ 핵분열기체의 방출거동을 정량적으로 평가하였다. 특히 사용후핵연료의 평균 연소도가 $27,000{\sim}65,000\;MWd/tU$ 범위내에서 연소도 변화에 따른 핵분열기체의 방출 분율은 측정한 실험결과와 ORIGEN 코드로부터 계산된 초기 inventory를 상호 비교하여 구하였다. $500^{\circ}C$ 1차 산화공정(voloxidation)에서 $^{85}Kr$ 및 $^{14}C(^{14}CO_2)$의 시간에 따른 방출거동은 $UO_2$ 핵연료의 $U_3O_8$으로의 분말화 정도와 밀접한 관련이 있는 것으로 보이며, 입계(grain-boundary)에 분포된 핵분열기체가 대부분 방출되는 것으로 여겨진다. 산화분말을 이용한 OREOX 공정으로부터 핵분열기체의 높은 방출율은 $700^{\circ}C$의 환원공정에서 온도 증가에 의한 기체 확산 및 $UO_2$으로의 환원에 의한 U 원자 이동성 증가에 의존하며 주로 inter-grain 및 intra-grain에 분포된 핵분열기체가 방출된 것으로 판단된다. 일차 산화공정시 $^{85}Kr$ 및 $^{14}C$ 핵분열기체의 방출 분율은 핵 연료 연소도가 증가함에 따라 높게 나타났고 방출 분율 범위는 총 inventory의 $6{\sim}12%$정도며, 산화분말의 OREOX 공정처리시 잔류 핵분열기체 대부분이 방출되는 것으로 보인다. 아울러 사용후핵 연료로부터 핵분열기체의 제거를 위해서는 고온 환원분위기보다는 산화에 의한 분말화가 더 효과적인 것으로 여겨진다.