• 대한기계학회논문집
• /
• 제19권4호
• /
• pp.1071-1082
• /
• 1995

Numerical analyses have been performed to obtain the absorption heat and mass transfer coefficients and the absorption mass flux from a falling film of the LiBr aqueous solution which is cooled by cooling air. Heat flux at the wall is specified in terms of the heat transfer coefficient of cooling air and the cooling air temperature. Effects of operating conditions, such as the heat transfer coefficient, the cooling air temperature, the system pressure and the solution inlet concentration have been investigated in view of the local absorption mass flux and the total mass transfer rate. Effects of film thickness and film Reynolds number on the heat and mass transfer coefficients have been also estimated. Analyses for the constant wall temperature condition have been also carried out to examine the reliability of present numerical method by comparing with previous investigations.

• 마이크로전자및패키징학회지
• /
• 제10권1호
• /
• pp.25-29
• /
• 2003

이 논문은 고분자 박막이 주변으로부터 수분을 흡수하게 될 때, 탄성 기판과 점탄성 박막의 계면 모서리에서 발생하는 응력 특이성을 다루고 있다. 계면에서 발생하는 응력을 조사하기 위해서 경계 요소법이 사용되고 있다. 주어진 점탄성 모델에 대해서 특이 차수가 수치적으로 계산된다. 이 논문에서 고려하고 있는 점탄성 모델에 대해서, 응력특이계수는 시간이 경과함에 따라 이완되고 있으나 특이 차수는 증가되고 있음을 보여준다.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2003년도 추계학술대회 발표 논문집
• /
• pp.146-153
• /
• 2003

This paper deals with the stress singularity induced at the interface corner between the viscoelastic thin film and the rigid substrate subjected to the combined influence of temperature change and moisture absorption. A boundary element analysis is employed to investigate the behavior of interface stresses. The film is assumed to be thermorheologically simple. It is further assumed that moisture effects are analogous to thermal effects. Numerical results are presented for a given viscoelastic model, indicating the singular residual stresses induced during cooling down from the curing temperature, and how they can be altered by subsequent moisture absorption at room temperature.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1998년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Spring 1998
• /
• pp.180-187
• /
• 1998

One of the major difficulties in the seismic analysis of a dam-reservoir system is the treatment of the energy radiation in the upstream direction of the reservoir. In this paper a new transmitting boundary is presented that can model properly the radiation of energy in the far field direction of a semi-infinite reservoir with constant depth. In the newly developed method, effects of surface wave motion are taken into account and the reservoir-foundation interaction is approximately accounted for with an absorbing boundary condition. If a dam has vertical upstream face and the infinitely long reservoir maintains constant depth, then the proposed transmitting boundary can be directly coupled with the model of dam body. In present study, the dam body is assumed to behave elastically and modeled by finite element method. Seismic responses of a dam model are investigated using the newly developed transmitting boundary.

• 대한기계학회논문집B
• /
• 제20권10호
• /
• pp.3371-3380
• /
• 1996

각종 노(furnace)를 포함하여 보일러, 가스터빈, 우주선 추진기구, 원자로 및 연료전지 등 고온이 열전달 문제를 다루는데 있어서 복사 열전달 연구는 매우 중요하다. 이러한 복사열전달에 대한 연구동향은 최근 복사 물성치(특히 가스에서의)를 예측하기 위한 이론 모델의 개발 및 측정분야와 복사전달 방정식의 해를 비교적 간단하게 구하기 위한 근사해법에 대한 연구로 크게 대별되고 있다. 이러한 두가지 연구방햐은 완전히 분리, 독립되어 있는 것은 아니며 서로 많은 연관성을 가지고 있다. 특히, 비회체가스(nongray gas)의 복사 성질에 대한 모델링은 근사 해법의 계산결과에 큰 영향을 미치게 되므로 가스의 복사 성질의 예측은 매우 중요한 연구 과제가 된고 있다. a Low resolution spectral modeling of water vapor is carried out by applying the weighted-sum-of-gray-gases model (WSGGM) to a narrow band. For a given narrow band, focus is placed on proper modeling of gray gas absorption coefficients vs. temeprature relation used for any solution methods for the Radiative Transfer Equation(RTE). Comparison between the modeled emissivity and the "true" emissivity obtained from a high temperatue statistical narrow band parameters is made ofr the total spectrum as well as for a few typical narrow bands. Application of the model to nonuniform gas layers is also made. Low resolution spectral intensities at the boundary are obtained for uniform, parabolic and boundary layer type temeprature profiles using the obtained for uniform, parabolic and boundary layer type temperature profiles using the obtained WSGGM's with 9 gray gases. The results are compared with the narrow band spectral intensities as obtained by a narrow band model-based code with the Curtis-Godson approximation. Good agreement is found between them. Local heat source strength and total wall heat flux are also compared for the cases of Kim et al, which again gives promising agreement.

• 한국정밀공학회지
• /
• 제27권11호
• /
• pp.46-56
• /
• 2010

The present research works investigated into the low velocity impact characteristics of DP 780 high strength steel sheet with 1.7 mm in thickness subjected to free boundary condition using three-dimensional finite element analysis. Finite element analysis was carried out via ABAQUS explicit code. Hyper-elastic model and the damping factor were introduced to improve an accuracy of the FE analysis. An appropriate FE model was obtained via the comparison of the results of the FE analyses and those of the impact tests. The influence of the impact energy and nose diameter of the impact head on the force-deflection curves, impact time, absorption characteristics of the impact energy, deformation behaviours, and stress-strain distributions was quantitatively examined using the results of FE analysis. The results of the FE analysis showed that the absorption rate of impact energy lies in the range of the 70.7-77.5 %. In addition, it was noted that the absorption rate of impact energy decreases when the impact energy increases and the nose diameter of the impact head decreases. The local deformation of the impacted region was rapidly increased when the impact energy was larger than 76.2 J and the nose diameter was 20 mm. A critical impact energy, which occur the instability of the DP780, was estimated using the relationship between the plastic strain and the impact energy. Finally, characteristics of the plastic energy dissipation and the strain energy density were discussed.

• Composites Research
• /
• 제24권3호
• /
• pp.31-38
• /
• 2011

본 연구에서는 우주 파편들과의 초고속 충돌로부터 우주 구조물을 보호하기 위한 새로운 하이브리드 복합재료 쉴드가 제안되었다. 제안된 쉴드의 유한요소 모델을 구성하고, 에너지 흡수율을 예측하기 위해서 유한 요소 해석을 수행하였다. 최종모델의 해석에 앞서 각 구성 요소인 알루미늄 판, PMMA 판 그리고 중간층인 직물 섬유의 해석이 먼저 수행되었으며, 각 요소의 유한요소 모델의 타당성이 검증되었다. 해석에 사용된 재료 물성은 고 변형률 속도에서의 재료 물성들을 예측하여 사용하였으며, 해석 결과 개별 요소의 에너지 흡수율이 직물섬유를 제외하고는 잘 맞음을 확인하였다. 이후 하이브리드 복합재료 쉴드의 유한 요소 모델을 구성하였고, 직물섬유의 구속 조건을 고정과 비 구속의 두 가지로 나누어 해석을 수행하여 비교하였다. 이를 통해서 비구속 삽입된 섬유를 이용한 하이브리드 쉴드가 섬유 풀아웃 현상이 잘 구현되었고, 이로 인해 에너지 흡수율이 향상 될 수 있음을 최종 확인하였다.

• Earthquakes and Structures
• /
• 제9권1호
• /
• pp.173-194
• /
• 2015

Site response analysis is an important topic in earthquake engineering. A time-domain numerical method called as one-dimensional (1D) finite element artificial boundary method is proposed to simulate the homogeneous plane elastic wave propagation in a layered half space subjected to the obliquely incident plane body wave. In this method, an exact artificial boundary condition combining the absorbing boundary condition with the inputting boundary condition is developed to model the wave absorption and input effects of the truncated half space under layer system. The spatially two-dimensional (2D) problem consisting of the layer system with the artificial boundary condition is transformed equivalently into a 1D one along the vertical direction according to Snell's law. The resulting 1D problem is solved by the finite element method with a new explicit time integration algorithm. The 1D finite element artificial boundary method is verified by analyzing two engineering sites in time domain and by comparing with the frequency-domain transfer matrix method with fast Fourier transform.

• 대한기계학회논문집B
• /
• 제20권2호
• /
• pp.670-679
• /
• 1996

A numerical study for vapor absorption into LiBr-H$_{2}$O solution film flowing over horizontal circular tubes has been carried out. The momentum, energy and diffusion equations, which are parabolized by the boundary- layer approximation, are solved simultaneously for various mass-flow rates and inlet conditions. The results for the velocity, temperature and concentration fields, as well as the heat and mass flux at the free surface are presented. The effects of inlet conditions, i.e., flow rate, temperature and concentration, on the absorption process are also examined and discussed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 춘계학술대회 논문집
• /
• pp.121-122
• /
• 2007