• 제목/요약/키워드: Bottom-reinforcement

검색결과 191건 처리시간 0.027초

Investigations of different steel layouts on the seismic behavior of transition steel-concrete composite connections

  • Qi, Liangjie;Xue, Jianyang;Zhai, Lei
    • Advances in concrete construction
    • /
    • 제8권3호
    • /
    • pp.173-185
    • /
    • 2019
  • This article presents a comparative study of the effect of steel layouts on the seismic behavior of transition steel-concrete composite connections, both experimental and analytical investigations of concrete filled steel tube-reinforced concrete (CFST-RC) and steel reinforecd concrete-reinforced concrete (SRC-RC) structures were conducted. The steel-concrete composite connections were subjected to combined constant axial load and lateral cyclic displacements. Tests were carried out on four full-scale connections extracted from a real project engineering with different levels of axial force. The effect of steel layouts on the mechanical behavior of the transition connections was evaluated by failure modes, hysteretic behavior, backbone curves, displacement ductility, energy dissipation capacity and stiffness degradation. Test results showed that different steel layouts led to significantly different failure modes. For CFST-RC transition specimens, the circular cracks of the concrete at the RC column base was followed by steel yielding at the bottom of the CFST column. While uncoordinated deformation could be observed between SRC and RC columns in SRC-RC transition specimens, the crushing and peeling damage of unconfined concrete at the SRC column base was more serious. The existences of I-shape steel and steel tube avoided the pinching phenomenon on the hysteresis curve, which was different from the hysteresis curve of the general reinforced concrete column. The hysteresis loops were spindle-shaped, indicating excellent seismic performance for these transition composite connections. The average values of equivalent viscous damping coefficients of the four specimens are 0.123, 0.186 and 0.304 corresponding to the yielding point, peak point and ultimate point, respectively. Those values demonstrate that the transition steel-concrete composite connections have great energy dissipating capacity. Based on the experimental research, a high-fidelity ABAQUS model was established to further study the influence of concrete strength, steel grade and longitudinal reinforcement ratio on the mechanical behavior of transition composite connections.

익산미륵사지 지반특성에 대한 지구물리학적 연구 (A Geophysical Study on Site Characteristics of the Western Pagoda of the Mireuksa Site, Iksan, Korea)

  • 류제라;서만철
    • 지구물리
    • /
    • 제4권1호
    • /
    • pp.1-10
    • /
    • 2001
  • 많은 유형문화재들이 과학적인 보존, 보수 없이 손상되어지고 있다. 이에 국내 유형문화재의 보수?보존 방안 대책과 복원에 대한 설계 자료로의 이용을 목적으로 익산미륵사지 서탑을 대상으로 지구물리학적 탐사를 적용하였다. 전기비저항, 탄성파, GPR탐사 등이 지구물리학적 탐사를 6개 측선에서 시행하여 서탑의 천부구조 영상화를 통해 지반특성과 구조적 안정성을 조사하였다. 전기비저항탐사에 의해 저비저항대 부분이 현재 탑이 남서쪽으로 기울어진 현상에 영향이 있는 것으로 해석된다. 탄성파 굴절법탐사와 GPR탐사에서 다짐층과 원지반층의 경계가 약 3.3~3.5m로 나타남이 일치하고 있으며 다짐층은 탑을 중심으로 넓게 분포하는 것이 아니라 북쪽으로 치우쳐 탑의 면적보다 작게 조서오딘 것으로 판단되고 현재 탑이 남서쪽으로 약간의 기울임을 보이는데 여기에는 지반강화대책이 필요한 것으로 판단된다.

  • PDF

Dynamic instability region analysis of sandwich piezoelectric nano-beam with FG-CNTRCs face-sheets based on various high-order shear deformation and nonlocal strain gradient theory

  • Arefi, Mohammad;Pourjamshidian, Mahmoud;Arani, Ali Ghorbanpour
    • Steel and Composite Structures
    • /
    • 제32권2호
    • /
    • pp.157-171
    • /
    • 2019
  • In this research, the dynamic instability region (DIR) of the sandwich nano-beams are investigated based on nonlocal strain gradient elasticity theory (NSGET) and various higher order shear deformation beam theories (HSDBTs). The sandwich piezoelectric nano-beam is including a homogenous core and face-sheets reinforced with functionally graded (FG) carbon nanotubes (CNTs). In present study, three patterns of CNTs are employed in order to reinforce the top and bottom face-sheets of the beam. In addition, different higher-order shear deformation beam theories such as trigonometric shear deformation beam theory (TSDBT), exponential shear deformation beam theory (ESDBT), hyperbolic shear deformation beam theory (HSDBT), and Aydogdu shear deformation beam theory (ASDBT) are considered to extract the governing equations for different boundary conditions. The beam is subjected to thermal and electrical loads while is resting on Visco-Pasternak foundation. Hamilton principle is used to derive the governing equations of motion based on various shear deformation theories. In order to analysis of the dynamic instability behaviors, the linear governing equations of motion are solved using differential quadrature method (DQM). After verification with validated reference, comprehensive numerical results are presented to investigate the influence of important parameters such as various shear deformation theories, nonlocal parameter, strain gradient parameter, the volume fraction of the CNTs, various distributions of the CNTs, different boundary conditions, dimensionless geometric parameters, Visco-Pasternak foundation parameters, applied voltage and temperature change on the dynamic instability characteristics of sandwich piezoelectric nano-beam.

암반 비탈면의 인장균열 위치 선정에 관한 사례 연구 (Case Study on Location of Possible Tension Crack in Rock Slope)

  • 전병곤;김지성;강기천
    • 한국지반공학회논문집
    • /
    • 제37권3호
    • /
    • pp.5-17
    • /
    • 2021
  • 본 연구는 도로건설공사 중 발생한 암반 비탈면의 인장균열 발생원인 및 대책 방안을 소개하고자 한다. 확장 가능한 인장균열 범위를 조사하기 위하여 전기비저항 탐사를 수행하여 암반의 연약대 분포 여부를 조사한 결과, 인장균열이 발생한 부체도로 하단에 저비저항대가 나타나며 굴착 비탈면 상단 부근에 저비저항대가 분포하는 것으로 확인되었다. 따라서 발생 가능한 인장균열 위치를 굴착 비탈면 상단으로 결정하여 보강 설계를 수행하였고, 보강방안으로 앵커와 억지말뚝 2열이 제안되었고 비탈면 안정해석을 통하여 보강 이후 허용안전율을 만족하는 것으로 나타났다.

독립형 LNG 화물창의 공학적 결함 평가 (Engineering Critical Assessement for an Independent Type-B LNG Cargo Tank)

  • 서재훈;박규식;차인환;정준모
    • 대한조선학회논문집
    • /
    • 제60권4호
    • /
    • pp.213-221
    • /
    • 2023
  • The demand for Liquefied Natural Gas (LNG) carriers and LNG-fueled ships has significantly increased in recent years due to the sulfur-oxide emission regulations by the International Maritime Organization (IMO). The main goal of this paper is to introduce the process for the Engineering Critical Assessment (ECA) of IMO independent type-B cargo tanks made from 9% nickel alloy. A methodology proposed by the British Standard was used to conduct ECA for any structure with initial flaws. Based on this standard, a Matlab code was developed to perform ECA. Coarse mesh Finite Element Analysis (FEA) was performed on an independent type-B LNG cargo tank with a capacity of 15,000 m3. The location with the highest development of maximum principal stress was identified at the bottom of the cargo tank. Fine mesh FEA was performed to obtain the stress range required for ECA. The dynamic cargo tank loads used for FEA were determined using some ship rules presented by Det Norske Veritas. As a result of performing a 20-year long-term crack propagation analysis with a semi-elliptical surface crack, the fracture-to-yield ratio exceeded the Fracture Assessment Line (FAL) and some structural reinforcement was necessary. Performing a 15-day short-term crack propagation analysis, the fracture-to-yield ratio remained within the FAL, and no significant LNG leaks were expected. This paper is believed to provide a guide for performing ECA of LNG cargo tanks in the future by providing the basic theory and application sample necessary to perform ECA.

GFRP로 보강된 다양한 초기 조건의 콘크리트보의 파괴 거동 평가 (Evaluation of Failure Mode in Concrete Beam Restrengthened with GFRP with Various Initial Conditions)

  • 남진원;권성준
    • 한국건설순환자원학회논문집
    • /
    • 제11권3호
    • /
    • pp.177-183
    • /
    • 2023
  • 유리섬유로 보강된 보강된 보의 경우 초기조건 및 보강형태에 따라 다양한 파괴모드가 발생한다. 본 연구에서는 콘크리트 탄성계수보다 약간 큰 유리섬유 보강재를 적용한 무근 콘크리트보의 파괴거동을 분석하였다. 실험을 위해 24 MPa 강도를 가지는 보를 제작하였으며, 초기 노치, 겹이음, 단부보강, 파이버 앵커 등의 영향을 분석하였다. 노치 및 노치부의 겹이음은 일반보강효과와 비슷한 하중증가를 나타내었는데, 이는 함침된 유리섬유의 에폭시가 노치 단면을 충분히 수복하기 때문이다. 보강하지 않은 기준기편에 비하여 초기 노치의 경우 0.78을, 보강한 경우는 4.43~5.61의 보강효과를 나타내었으며 휨파괴에서 시작되는 계면파괴가 지배적이었다. 높이의 1/3 이상의 단부 스트립과 파이버 앵커를 가진 경우 가장 이상적인 파괴거동(보강재 파단)을 나타내었는데, 일반 보강시편보다 150 % 이상의 파괴하중을 나타내었다.

Static analysis of nonlinear FG-CNT reinforced nano-composite beam resting on Winkler/Pasternak foundation

  • Mostefa Sekkak;Rachid Zerrouki;Mohamed Zidour;Abdelouahed Tounsi;Mohamed Bourada;Mahmoud M Selim;Hosam A. Saad
    • Advances in nano research
    • /
    • 제16권5호
    • /
    • pp.509-519
    • /
    • 2024
  • In this study, the static analysis of carbon nanotube-reinforced composites (CNTRC) beams resting on a Winkler-Pasternak elastic foundation is presented. The developed theories account for higher-order variation of transverse shear strain through the depth of the beam and satisfy the stress-free boundary conditions on the top and bottom surfaces of the beam. To study the effect of carbon nanotubes distribution in functionally graded (FG-CNT), we introduce in the equation of CNT volume fraction a new exponent equation. The SWCNTs are assumed to be aligned and distributed in the polymeric matrix with different patterns of reinforcement. The rule of mixture is used to describe the material properties of the CNTRC beams. The governing equations were derived by employing Hamilton's principle. The models presented in this work are numerically provided to verify the accuracy of the present theory. The analytical solutions are presented, and the obtained results are compared with the existing solutions to verify the validity of the developed theories. Many parameters are investigated, such as the Pasternak shear modulus parameter, the Winkler modulus parameter, the volume fraction, and the order of the exponent in the volume fraction equation. New results obtained from bending and stresses are presented and discussed in detail. From the obtained results, it became clear the influence of the exponential CNTs distribution and Winkler-Pasternak model improved the mechanical properties of the CNTRC beams.

국가민속문화재 전 순정효황후 주칠 나전가구(傳 純貞孝皇后 朱漆 螺鈿家具) 매트리스의 보존처리 및 제작 기법 비교 (The Conservation Treatment for the Mattress from National Folklore Cultural Heritage, the Red-lacquered Furniture with Inlaid Mother-of-pearl Design Used by Empress Sunjeonghyo and Comparative Study of Manufacturing Techniques)

  • 박형호;김종수;김수철;금종숙;장종민;김수하;박창열
    • 헤리티지:역사와 과학
    • /
    • 제54권1호
    • /
    • pp.220-237
    • /
    • 2021
  • 국가민속문화재 전 순정효황후 주칠 나전가구(傳 純貞孝皇后 朱漆 螺鈿家具) 매트리스의 제작 기법 및 사용 재료의 특성을 확인한 후 보존처리를 진행하였으며, 창덕궁 대조전 매트리스와 비교하여 1920~30년대 국내에서 사용된 매트리스의 특징을 확인해보고자 하였다. 전 순정효황후 매트리스 분석 결과, 프레임은 소나무과 솔송이 사용되었으며, 구조부인 웨빙, 트와인은 마섬유로 확인되었다. 충전재인 버랩은 마섬유, 초석은 벼속, 그 외 충전재는 면섬유로 확인되었다. 커버 상단은 레이온, 하단은 면섬유가 사용되었다. 사용된 재료와 내부 구조를 확인한 결과, 서양 가구인 데이베드와 의자에서 주로 사용되는 업홀스터리로 제작되었다. 보존처리 과정에서는 분석 결과를 바탕으로 유사한 재료를 사용하였으며, 해체 → 세척 → 보수 및 보강 → 조립의 순으로 진행하였다. 해체 과정에서 상단의 커버가 새롭게 발견되었으며, 충전재인 버랩에서 요코하마, 고베, 조선의 단어가 발견되었다. 하지만 제작사나 제작 장소를 특정할 수 있는 추가적인 흔적은 발견되지 않았다. 구조부와 충전재, 커버는 건식 세척을 진행한 후 업홀스터리 구조에서 기존 재료는 제거하지 않고 유사한 재료를 사용하여 보수 및 보강을 진행하였다. 구조부 웨빙은 동종의 재료를 사용하여 보강하였으며, 스프링의 배열 및 고정은 트와인을 사용하여 목재 프레임에 고정하였다. 손상된 면천과 버랩은 유사한 소재의 보강재를 덧댄 후 바느질하였다. 상단 커버는 손상부에 보강 직물을 마름하여 안쪽에 넣고 바느질하였다. 조립은 해체의 역순으로 진행하였다. 스프링과 닿는 부분에 동일 소재의 버랩을 삽입하여 고정한 후 충전패드, 보강천, 초석, 면천, 솜포, 커버 보호용 광목천, 커버를 씌워 택으로 마무리하였다. 순정효황후가 사용한 2개의 매트리스는 제작 시기의 차이가 있을 뿐 프레임과 충전재, 커버로 구성된 서양의 업홀스터리로 제작되었다. 보존처리 과정에서 새로운 벨벳 커버가 발견되었고 이전 수리 흔적이 확인되었으며, 충전재로 초석, 가마니와 짚풀 등이 확인됨에 따라 제작 환경에 따른 사용 재료의 변화를 확인할 수 있었다. 향후 근대문화재 업홀스터리 의자 또는 소파의 보존처리에서 사용 재료 및 제작 방법의 변화를 살펴볼 수 있을 것으로 기대된다.

고강도 철근콘크리트 깊은 보의 전단 강도에 관한 실험평가 (Experimental Evaluation on Shear Strength of High-Strength RC Deep Beams)

  • 이우진;윤승조;김성수
    • 콘크리트학회논문집
    • /
    • 제15권5호
    • /
    • pp.689-696
    • /
    • 2003
  • 최근 ACI 318-02기준 부록 A에 깊은 보의 전단설계에 있어 스트럿-타이 모델을 적용 가능하도록 소개하고 있다. STM은 깊은 보, 개구부가 있는 깊은 보, 코벨, 턱이진 보와 같이 부재의 변형률 분포가 상당히 비선형인 콘크리트 부재의 설계에 광범위하게 사용되고 있다. 본 연구는 고강도콘크리트를 적용한 깊은 보의 각국의 전단강도규준과 전단거동을 평가하고자 실험적 연구로 2점 단순 집중하중을 받는 고강도 RC 깊은 보 5개를 제작하여 파괴 실험을 실시하였다. 또한, 국내 B사의 기계적 정착철물을 사용하여 주인장철근의 양단부에 기계적정착을 적용하였다. 파괴 시 모든 시험체는 가력점과 지지점을 연결하는 주 경사균열이 나타났고, 주인장철근을 기계적 정착한 시험체가 90도 표준갈고리 시험체보다 파괴 시 하중 수행능력이 우수한 것으로 나타났다. 실험결과를 기초로 ACI 318-99 기준, ACI 318-02 부록 A STM, CSA 23.3-94 기준 및 CIRIA Guide-2의 전단설계기준을 비교 평가하였다. ACI 318-99 기준과 ACI 318-02 기준의 스트럿-타이 모델, CIRIA Guide-2는 단순스팬 깊은 보의 극한전단강도 예측 있어 10∼36%정도 낮게 안정적으로 평가하는 것으로 나타났다. ACI 318-99 기준에 의한 전단강도예측값이 표준편차가 가장 낮은 것으로 조사되었다.

휨 철근이 배근된 HPFRCC 보 부재의 휨 거동 (Flexural Behavior of High Performance Fiber Reinforced Cementitious Composites (HPFRCC) Beam with a Reinforcing Bar)

  • 신경준;김재화;조재열;이성철
    • 콘크리트학회논문집
    • /
    • 제23권2호
    • /
    • pp.169-176
    • /
    • 2011
  • 이 논문에서는 철근의 효과를 고려한 고인성 섬유 보강 콘크리트의 휨 거동을 분석하기 위해 이에 대한 휨 실험을 수행하였다. 실험 결과, 부재의 파괴 시 까지 안정적인 인장 응력을 보여주는 HPFRCC로 인해 휨 강도가 증가하는 것으로 나타났으며, 특히 인장 철근이 항복할 때까지 균열이 국부화되지 않고 고르게 분산되는 것으로 나타났다. 단면 해석을 통해, 직접 인장 실험으로부터 측정된 인장강도를 이용하여 해석할 경우 R/HPFRCC의 휨 강도를 과대평가하는 것으로 나타난 반면, 인장 강성 실험으로부터 도출된 인장강도를 이용하여 해석할 경우 실험 결과와 비교적 잘 일치하는 것으로 나타났다. 실험 및 이론적 연구를 바탕으로 이 논문에서는 휨 파괴 기준을 단면 상단에서의 콘크리트 압축파괴에 의한 것과 단면 하단부의 인장 파괴에 의한 것으로 구분하였다. 정의된 두 가지 휨 파괴 기준에 근거하여 이 논문에서는 극한 휨 강도를 산정할 수 있는 식을 제안하였으며, 제안된 식은 R/HPFRCC 부재의 설계 및 해석에 유용할 것으로 사료된다.