• Journal of Korea Technology Innovation Society
• /
• v.7 no.2
• /
• pp.441-458
• /
• 2004

이동망의 착신접속서비스는 각국에서 bottleneck 서비스로 인식하고 규제당국에서 원가에 근거하여 규제하고 있다. 원가에 의한 규제 방식으로 과거에는 회계자료를 근거로 한 역사적 원가가 사용되어 왔으나 최근에는 유선망의 경우처럼 bottom-up 방식의 장기증분원가(Long Run Incremental Cost ： LRIC)를 적용하는 사례가 증가하고 있다. LUC를 산정하기 위해서는 공학적인 기준에 따라 이동망을 설계하여 정확한 망 구성요소별 소요량을 측정하고 이를 투자비로 전환하는 작업이 필요하다. 유선망의 경우는 LRIC산정을 위한 망 설계방법론이 비교적 잘 확립되어 있으나, 이동망의 경우는 망 설계 및 망 구성요소별 소요량 산정방법론에 대한 연구가 부족한 실정이다. 본 고에서는bottom-up방식의 이동망 LRIC산정관련 해외 사례를 살펴보고 국내 실정에 적합한 이동망 설계 방법과 망 구성 요소별 소요량 산정 방법론을 제시해보고자 한다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.31 no.5
• /
• pp.320-333
• /
• 2019

In this study, a physics-based 3D morphology model for the estimation of an erosion rate of nourished beach is newly proposed. As a hydrodynamic module, IHFOAM toolbox having its roots on the OpenFoam is used. On the other hand, the morphology model comprised a transport equation for suspended sediment, and Exner type equation derived from the viewpoint of sediment budget with the bed load being taken to accounted. In doing so, the incipient motion of sediment is determined based on the Shields Diagram, while the bottom suspended sediment concentration, the bed load transport rate is figured out using the bottom shearing stress directly calculated from the numerically simulated flow field rather than the conventional quadratic law and frictional coefficient. In order to verify the proposed morphology model, we numerically simulate the nonlinear shoaling, breaking over the uniform beach of 1/m slope, and its ensuing morphology change. Numerical results show that the partially skewed, and asymmetric bottom shearing stresses can be successfully simulated. It was shown that sediments suspended and eroded at the foreshore by wave breaking are gradually drifted toward a shore and accumulated in the process of up-rush, which eventually leads to the formation of swash bar. It is also worth mentioning that the breaker bar formed by the sediments dragged by the back-wash flow which commences at the pinnacle of up-rush as the back-wash flow gets weakened due to the increased depth was successfully duplicated in the numerical simulation.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05b
• /
• pp.505-510
• /
• 1996

A simple model for RAM (Reliability, Availability and Maintainability) analysis and its computer code are developed for application to DUPIC fuel fabrication system. The approach is obtained by linking the allocation model (top-down method) to bottom-up method for RAM analysis. As a result, the availability requirement of subsystem, as well as the buffer storage requirement between processes, are evaluated for the DUPIC facility..

• 한국전산유체공학회:학술대회논문집
• /
• 1996.05a
• /
• pp.52-57
• /
• 1996

Mixing is most important for developing an electric washer which transforms angular momentum from rotating solid wall to laundry clothes inside it. For magnification of this mixing effect, some inventions are introduced to washing machine system, i. e., washing plate, washing rod, and even for washing cap in a model of a Korean manufacture. However, the previous efforts show dissatisfaction up till now. In this paper, a triumph to enhance mixing effects to increase washing performance is presented and verified by numerical investigation. The present model to simulate a washing tub is the simple circular cylinder with two endwall disks which is completely filled with a viscous liquid. The present improvement is to change mounting position of a bottom disk of the model cylinder. Therefore, the aim of this work just proposes a new idea, which is numerically inspected, to a producer of washing machine, In detail, this invention is alternating the mounting position of a rotating bottom disk. Actually skewed pulsator is placed in steady of a flat disk, so the two endwall disks at top and bottom are not in parallel. The angle between an inclined bottom disk and the horizontal plane is fixed as 5 degree and physical domain to consider poses a sliced cylinder. Flow fields in both a right circular cylinder and the present improved model are fully depicted by numerical integration on a body fitted nonorthogonal regular uniform grid system. Numerical data to explain flow structure are plotted for understanding of the effects of the inclined disk. Also enhanced mixing effects by the inclined rotating disk are gauged by accurate numerical data used in this work.

• Journal of Korea Water Resources Association
• /
• v.30 no.5
• /
• pp.487-493
• /
• 1997

The maximum run-up heights of single waves are investigated in this study. A boundary intergral equation model is used to calculate the maximum urn-up heights of both solitary and N-waves. The effect of the bottom friction is considered in the model through a boundary layer theory. The calculated run-up heights are compared with available laboratory measurements, and other numerical and approximate analytical solutions. They are in good agreement.

• Journal of the Korean Solar Energy Society
• /
• v.32 no.1
• /
• pp.32-39
• /
• 2012

New and renewable energy systems(solar thermal system, photovoltaic system, geothermal system, wind power system) are environmentally friendly technologies and these in South Korea are very important measures to reduce greenhouse-gas(GHG) and to push ahead with Green Growth. The purpose of this paper is to analyze GHG mitigation potential by distribution of solar thermal system in housing sector with bottom-up model called 'Long-range Energy Alternative Planning system'. Business as usual(BAU) was based on energy consumption characteristic with the trend of social-economic prospects and the volume of housing. The total amount of GHG emission of BAU was expected to continuous increase from 66.0 million-ton $CO_{2e}$ in 2007 to 73.1 million-ton $CO_{2e}$ in 2030 because of the increase of energy consumption in housing. The alternative scenario, distribution of solar thermal system in housing sector had GHG mitigation potential 1.54 million-ton $CO_{2e}$ in 2030. The results of this study showed that new and renewable energy systems made a contribution of reducing the use of fossil fuel and the emission of greenhouse-gas in building.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.19 no.1
• /
• pp.1-15
• /
• 2007

In this study 8 nodes parallel linux cluster system is constructed and tested for the evaluation of computational efficiency and reliability of the Yellow Sea tidal hydrodynamics prior to compute storm surge inundation along the west coast of the Korean Peninsular. Computational efficiency increases up to 7 times based on NPB bench-marking test. Simulated results by pADCIRC on reproduction of the Yellow Sea tidal hydrodynamics resemble well with previous studies. According to model parameter tests, bottom friction coefficient, which should be appropriately represented shallow depth along the west coast, is essential factor in simulation.

• Asia pacific journal of information systems
• /
• v.12 no.4
• /
• pp.21-36
• /
• 2002

This study empirically examined the effects of data warehousing methodology on the success of data warehousing. Research model and two hypotheses were set up to identify the relationships among two types of data warehousing methodology(top-down/bottom-up, dw configuration) and success based on the investigations of such theories as data warehousing, data warehousing methodology, IS success and so forth. And the survey instrument(questionnaire) was developed to collect data. Ultimately 183 questionnaires from 61 korean firms were collected. Findings showed that two types of data warehousing methodology affect significant effect on the success of data warehousing.

• Spatial Information Research
• /
• v.17 no.1
• /
• pp.131-144
• /
• 2009

Recently, a lot of local autonomous entities are promoting Ubiquitous City(U-City) Construction by integrating Information Communication Technology(ICT) with city development, and also internationally, a lot of cities are making efforts to develop U-City to intensify a city's competitive strength and improve life quality of city dwellers. In keeping with such a stream of the times, each local autonomous entity and project developer are developing a lot of methodologies to establish optimal U-City in corresponding cities and also inquiring into a variety of development procedures, such as connecting existing urban development methods with information establishment methods. The method used usually is to establish Information strategy Plan(ISP) for a city which will be developed through consulting in the stage of city development planning. ISP is to establish vision & strategy for building the ubiquitous city and is a methodology including city vision, strategy, goal, and implementation method, etc. However, due to a lot of variables, such as a variety of city environment, establishment period, budget, information technology, and etc., it is difficult to contain establishment plans for every occasion in a similar method, in reality. Therefore, it is naturally necessary to suggest plans for city vision & strategy, and selection of element technology/service. Thus, this paper suggests models for vision & strategy establishment of U-City and suggests Top-Down Approach and Bottom-Up Approach method as a plan for U-City establishment. In addition, this paper analyzes general promotion methodologies for constructing U-City and analyzes how these two strategic methods [Top-Down Approach and Bottom-Up Approach] for city vision establishment are composed in such a methodology, to define and analyze its constituent plan.

• Science of Emotion and Sensibility
• /
• v.6 no.1
• /
• pp.55-62
• /
• 2003

This study was an exploratory approach to the cognitive model of textile designers on the stage of motif development in textile design process. Prior to the main research, several previous studies adopting methods of video/audio protocol analysis were reviewed. On the basis of the review, the categories of design action were derived as an analysis frame by application of top-down access method, meanwhile the sub-groups of each category of design action were identified through a bottom-up access method. To summarize the research result, total three categories of textile design action appeared based on the theory of ‘Human processor’ model : ‘motor action’, ‘perceptual action’ and 'cognitive action'. In next, a new coding scheme suitably explaining these three categories of fertile design action was developed. Finally, a cognitive model of textile designer on the stage of motif development, employing the new coding scheme, was suggested in this study.