• 한국지반공학회논문집
• /
• 제37권3호
• /
• pp.43-50
• /
• 2021

우리나라는 산지가 많은 지형적인 특성으로 도로와 도시 개발에 따라 산지를 굴착하고 옹벽을 설치하는 공사가 매년 증가하고 있다. 특히 Panel식 옹벽은 안정성이 높기 때문에 사용빈도가 높으며, 일반적으로 Bottom-up방식을 사용하고 있다. 하지만 옹벽을 설치하기 위해 1:0.3정도의 기울기로 굴착 후 옹벽을 시공하는 방식인데 이러한 방식은 경사굴착으로 인해 추가 토공처리가 필요하며, 되메움과 다짐불량에 의한 안정성 저하 등의 문제점을 지니고 있다. Top-down방식의 경우 이러한 문제점을 보완할 수 있다. 하지만 Panel을 사면에 부착시키기 위해 사용되는 모르타르로 인해 옹벽과 사면 사이에 불투수층이 생긴다. 따라서 본 연구에서는 가상의 사면에 불투수층을 고려하여 배수시스템들의 역할이 우기시 사면의 안정성에 미치는 영향에 대하여 비교 분석하였다.

• 농촌계획
• /
• 제28권3호
• /
• pp.49-59
• /
• 2022

Recently, Korea aimed to increase water use efficiency by implementing integrated management according to the water management unification policy. Considering the enormous use of water resources in the agricultural sector, it is necessary to efficiently conserve water in terms of demand management by intensifying the stakeholders' involvement and awareness campaigns. The existing agricultural water management system in Korea is based on a top-down approach by which the government agencies directly plan budgets and policies to be enforced on and implemented by farmers, with little to no involvement of farmers in the decision-making process. However, this process has hindered the desired water resources management and the water conservation goal at the field level. Moreover, the limited research on water governance operations focusing on agricultural water creates a knowledge gap, particularly in Korea. Thus, it is necessary to investigate water governance cases with successful implementations in agricultural and rural areas to identify the factors applicable to domestic governance in Korea. In addition, a more systematic governance model should be established by identifying the subjectivity of the stakeholders' involvement in agricultural water governance. Therefore, this study proposed a new bottom-up model for agricultural water governance, which aims to raise the problem of autonomous water governance while promoting stakeholders' voluntary participation in agricultural water management and reflecting farmers' involvement in the decision-making process. Moreover, if agricultural water governance is expanded nationwide by reflecting agricultural and water resource policies in the future, it is believed that positive effects can be achieved in increasing utilization efficiency and securing sustantiality through agricultural water saving.

• International Journal of Advanced Culture Technology
• /
• 제12권3호
• /
• pp.67-72
• /
• 2024

The algorithm is applied on the premise that the image generated by AI can be recognized and used smoothly by the user. Other assets are not exposed to the user or discarded because they are unnecessary or unfamiliar. This study aims to expand the scope of the utility of the image generated by AI, which is used as a high-level tool in the design field. To this end, we first examined human information processing and reflection in AI by the cognitive paradigm by examining previous studies and cases, and discussed the value of expansion by focusing on creativity and bottom-up processing of AI's self-organization. Considering the human recogmition process that instinctively grasps an object, the following AI usability was proposed. It is to utilize AI as a high-level tool applied appropriately to human perception, or to utilize the derivative itself by bottom-up self-organization. In addition, it is to set the algorithm to the minimum intervention so that basic elements such as shape, color, size, texture, and movement are composed of figure-ground according to the human perception process that instinctively grasps an object, and to utilize the results. Limiting the use of AI to a tool suitable for human perception and information processing or production by designers or general users is to operate only a part of the convenience and usability of AI. The image creation through AI's self-organization, as seen from the cognitive paradigm, is a step toward opening a new era of design where technical aesthetics meets devices, just as design has been constantly developing in pursuit of novelty and differentiation due to its nature.

• Journal of Mechanical Science and Technology
• /
• 제18권2호
• /
• pp.313-324
• /
• 2004

A rich phenomenon in the dynamics of azimuthal vortices in a circular cylinder caused by the inertial oscillation is investigated numerically at high Reynolds numbers and moderate Rossby numbers. In the actual spin-up flow where both the Ekman circulation and the bottom friction effects are included, the first appearance of a seed vortex is generated by the Ekman boundary-layer on the bottom wall and the subsequent roll-up near the corner bounded by the side wall. The existence of the small vortex then rapidly propagates toward the inviscid region and induces a complicated pattern in the distribution of azimuthal vorticity, i.e. inertial oscillation. The inertial oscillation however does not deteriorate the classical Ekman-pumping model in the time scale larger than that of the oscillatory motion. Motions of single vortex and a pair of vortices are further investigated under a slip boundary-condition on the solid walls. For the case of single vortex, repeated change of the vorticity sign is observed together with typical propagation of inertial waves. For the case of a pair of vortices with a two-step profile in the initial azimuthal velocity, the vortices' movement toward the outer region is resisted by the crescent-shape vortices surrounding the pair. After touching the border between the core and outer regions, the pair vortices weaken very fast.

• 상하수도학회지
• /
• 제13권1호
• /
• pp.51-60
• /
• 1999

An intermittently-aerated, intermittently-decanted single-reactor process (KIDEA process : KIST intermittently decanted extended aeration process) was applied for nitrogen removal from wastewater. Synthetic wastewater with chemical oxygen demand (COD): nitrogen (N) ratio of approximately 5.25: 1 was used. The average COD removal efficiency reached above 95%, and under optimal conditions nitrogen removal efficiency also reached above 90%. This process consisted of 72 minute aeration, 48 minute settling and 24 minute effluent decanting with continuous feeding of influent wastewater from the bottom of the reactor, and did not require a separate anoxic mixing-phase. In this process, nitritation ($1^{st}$ step of nitrification) was induced but nitratation($2^{nd}$ step of nitrification) was suppressed. Main factors responsible for the accumulation of nitrite ion in the experimental condition were free ammonium and dissolved oxygen. This condition of nitrite build-up accelerated by continuous feed flow in the bottom of the KIDEA reactor because of high concentration of ammonia nitrogen in the influent. This research provides one of answers to control nitrate build-up.

• 한국조경학회지
• /
• 제43권5호
• /
• pp.87-99
• /
• 2015

과거 하드웨어 중심의 하향식 농촌개발사업을 개선하고자 2000년대부터 소프트웨어 중심의 사업을 지향하였고, 지자체 주도의 마을만들기가 행해졌다. 하지만 지금까지의 마을만들기 사업들 역시 외형적으로는 상향식 개발구조를 보이지만, 실제적으로는 행정기관의 관여 아래 추진되는 하향식 추진절차를 벗어나지 못하고 있는 실정이다. 본 연구는 현재의 마을만들기 진행과정에서 한 단계 더 나아간 상향식 개발방식을 효과적으로 반영하기 위해 수행되었으며, 여러 사람이 같은 자격으로 모여 마을만들기에 참여할 수 있도록 '협업형 마을만들기'를 제시한다. 연구대상지는 거창군을 대상으로 하였다. 행정 관련 공무원과 1:1 인터뷰를 통해 현재 거창군 마을만들기의 현황 및 실태분석을 알아보고, 이장단 설문조사와 일반주민 심층면담을 통해 마을만들기에 대한 주민 인식을 선행조사하였다. 이를 바탕으로 관련 공무원, 전문가, 지역주민의 참석 하의 10회에 걸친 라운드테이블을 진행하여 거창군의 협업형 마을만들기 실천전략을 로컬푸드, 문화 복지, 귀농 귀촌, 마을개발, 도농교류의 5가지 핵심분야를 선정하였다. 또한, 이는 행정의 지속적인 협업체계 구축과 주민의 참여역량 강화 노력, 전문가의 체계적인 통합운영관리 지원을 통해 이루어져야 한다고 판단하였다. 이로서 거창군만의 협업형 마을만들기 실천전략을 모색하였으며, 향후 각 농촌지역에서 상향식 마을만들기를 진행하고 도입할 수 있기를 기대한다.

• 생태와환경
• /
• 제38권4호통권114호
• /
• pp.445-453
• /
• 2005

전남 주암호에서의 식물플랑크톤 동태를 파악하기 위해 2003년 2월부터 10월까지 식물플랑크톤 생물량 (클로로필 a)의 크기별 시 ${\cdot}$ 공간적 변동과 제반 환경요인에 대해 조사하였다. 본 논문에서는 주암호와 같은 담수호에서 식물플랑크톤의 크기 구조가 계절적, 공간적으로 나타나는 변동에 대한 영양염들의 영향을 회귀분석을 통해 파악하고자 하였다. 또한 인공지능망을 이용하여 전체 식물플랑크톤의 생물량(클로로필 a)에 대한 상향식, 하향식 조절인자들에 대한 상대적인 중요도를 정량적으로 파악하고자 하였다. 비록 동물플랑크톤 포식압을 나타내는 포식율이나 동물플랑크톤 생체량 대신 포식압의 간접 지수인 chlorophyll a: pheopigments ratio를 활용하였지만 회귀분석결과, 영양염 특히 인산염과 식물플랑크톤의 생물량이 양의 상관관계를 갖는 것으로 나타났고chlorophyll a: pheopigments ratio도 결정계수가 다소 낮기는 하지만 양의 상관관계를 보여 주었다. 인공지능망 시뮬레이션 결과에서는 주암호 식물플랑크톤의 생물량은 수온, 영양염 특히 인산염과 같은 상향식 조절이 우세한 것으로 나타났다.

• Carbon letters
• /
• 제25권
• /
• pp.89-94
• /
• 2018

In this study, we tried to prepare an isotropic spinnable pitch which can be useful to prepare the general purpose carbon fiber through the co-carbonization of biomass tar with ethylene bottom oil under two different preparation methods (atmospheric distillation, pressurized distillation). The results showed that the ethylene bottom oil added co-carbonization was very effective to decrease of the oxygen contents for obtaining a stable spinnable pitch. The pressurized distillation was more effective to reduce the oxygen functional groups of pitches than atmospheric distillation. The obtained spinnable pitch by the pressurized distillation showed higher pitch yield of 42% and lower oxygen content of 9.12% than the spinnable pitch by the atmospheric distillation. The carbon fiber derived from the pressurized distillation spinnable pitch by carbonization at $800^{\circ}C$ for 5 min showed that the higher tensile strength of carbon fiber was increased up to 800 MPa.

• 한국표면공학회지
• /
• 제31권5호
• /
• pp.237-244
• /
• 1998

In this stydy, submicron shallow trenches applied to STI(shallow tench isolation) were etched using inductively coupled $CI_2$/HBr and $CI_2/N_2$plasmas and the physical and electrical defects remaining on the etched silicon trench surfaces and the effects of various annealing and oxidation on the removal of the defects were studied. Using high resolution electron microscopy(HRTEM), Physical defects were investigated on the silicon trench surfaces etched in both 90%$CI_2$/ 10%$N_2$ and 50%$CI_2$/50%HBr. Among the areas in the tench such as trench bottom, bottom edge, and sidewall, the most dense defects were found near the trench bottom edge, and the least dense defects were found near the trench bottom edge, and least dense defects compared to that etched with ment as well as hydrogen permeation. Thermal oxidation of 200$\AA$ atthe temperature up to $1100^{\circ}C$apprars not to remove the defects formed on the etched silicon trenches for both of the etch conditions. To remove the physicall defects, an annealing treatment at the temperature high than $1000^{\circ}C$ in N for30minutes was required. Electrical defects measured using a capacitance-voltage technique showed the reduction of the defects with increasing annealing temperature, and the trends were similar to the results on the physical defects obtained using transmission electron microscopy.

• 반도체디스플레이기술학회지
• /
• 제23권2호
• /
• pp.65-70
• /
• 2024

Using a computational fluid dynamics(CFD) simulation tool, we have provided a coating guideline for slot-die coating with a double layer slot die head. We have analyzed the fluid dynamics in terms of the coating speed, flow rate ratio, and viscosity ratio, which are critical for the stability of coating meniscus. We have identified the common coating defects such as break-up, air entrainment, and leakage by varying the coating speeds. The flow rate ratio is the critical parameter determining the wet film thickness of the top and bottom layers. It is shown that when the flow rate ratio exceeds or equals 1.8, air entrainment occurs due to insufficient hydraulic pressure in the bottom layer, even though the total flow rate remains constant. Furthermore, we have found that the flow of the bottom layer is significantly affected by the viscosity of top layer. The viscosity ratio of 4 or higher obstructs the flow of the bottom layer due to the increased hydraulic resistance, resulting in leakage. Finally, we have demonstrated that as the viscosity ratio increases from 0.1 to 10, the maximum coating speed rises from 0.4 mm/s to 1.6 mm/s, and the minimum wet film thickness decreases from 800 ㎛ to 200 ㎛.