• 한국포장학회지
• /
• 제11권1호
• /
• pp.11-16
• /
• 2005

Fruits are subjected to complex dynamic stresses in the transportation environment. During a long journey form the production area to markets, there is always some degree of vibration present. Vibration inputs are transmitted from the vehicle through the packaging to the fruit. Inside, these cause sustained bouncing of fruits against each other and container wall. These steady state vibration input may cause serious fruit injury, and this damage is particularly severe whenever the fruit inside the package is free to bounce, and is vibrated at its resonance frequency. The determination of the resonant frequencies of the fruit may help the packaging designer to determine the proper packaging system providing adequate protection for the fruit, and to understand the complex interaction between the components of fruit when they relate to expected transportation vibration inputs. The first frequency of the pear in packaged freight be stacked in resonance frequency band of the pear packaged freight was increased from the bottom to the top of the stack but the second frequency of that in resonance frequency band of the pear was decreased. This indicated that the high damage score of the pear in bottom tier in vibration test was due to higher acceleration level in resonance frequency band of the pear.

• 한국수자원학회논문집
• /
• 제33권2호
• /
• pp.237-245
• /
• 2000

시화배수갑문은 당초 내측 담수호의 수위관리를 위하여 설계되었으나 호수의 수질 악화를 방지하기 위하여 배수갑문을 당초 계획보다 잦은 빈도로 작동시키고 있다. 이에 따라 강한 유입 흐름의 영향을 받는 내측 배수로의 바닥이 상당히 넓은 범위에 걸쳐 침식되고 있다. 최근에 침식이 진행되는 것을 막기위하여 에이프런 전면부 일부 구간을 수중콘크리트로 타설하여 바닥보강을 시행하였다. 본 연구는 수리모형실험을 통하여 바닥보강 시행 이전과 이후에 대하여 수리현상을 파악하고 유입흐름의 에너지 변화와 바닥 암석의 저항력 등을 파악하여 향후 침식의 추이를 예측하기 위하여 실시하였다. Annandale(1995)은 침식지수 이론을 도입하여 많은 실험을 통하여 침식지수와 흐름의 에너지 감쇠 간의 관계를 파악하였으며 암석의 침식여부를 판단할 수 있는 기준을 제시하였다. 암석의 침식지수는 지질조사에서 시추한 시편의 분석결과를 토대로 결정하였으며 수류의 에너지 감쇠는 수리모형실험 결과로부터 전수두의 감쇠량의 추정을 통하여 계산하였다. 이와 같이 결정된 두 값을 주어진 기준도상에 도시하여 그 위치에 따라 침식가능성을 판단하였다.

• 한국지반신소재학회논문집
• /
• 제19권4호
• /
• pp.1-9
• /
• 2020

본 연구는 비정상류 조건에서 오염원 유출을 방지하기 위한 경사식호안 해상폐기물매립장 차수시스템에서 오염원의 이동을 알아보기 위하여 해석을 수행하였다. 차수시스템은 바닥과 측면으로 구성하였다. 바닥차수시스템은 불투수 점토층이 측면차수시스템은 HDPE 차수시트가 주 역할을 하고 부수적으로 중간보호층이 차수를 담당한다. SEEP/W와 CTRAN/W 프로그램을 이용하여 침투·이류 분산 해석을 실시하였다. 해석결과, 조석에 따른 수위변동을 고려한 비정상류 조건 하 에서의 전수두, 간극수의 유속벡터가 시간에 따라 크기 및 방향이 바뀌고 오염원 분산 농도가 변화하였다. 조석차 2m일 경우와 8m일 경우를 비교하면 조차가 클수록 비정상류조건에서의 오염물의 농도가 증가하였다. 오염원 농도 변화율이 조석의 변화에 따라 오염원 농도 변화율 기울기의 변화되어 결과적으로 오염원 유출이 정상류 상태에 비하여 작은 것으로 나타났다.

• 한국가스학회지
• /
• 제18권2호
• /
• pp.69-72
• /
• 2014

LNG 저장탱크의 9% Ni강 내부탱크가 파손되면 LNG가 유출되어 콘크리트 외부탱크가 LNG를 저장하게 되는데 이때 외부탱크의 내면과 외면의 온도차에 의해서 외부탱크 원통형 하단부에 큰 인장응력이 발생하게 된다. 이러한 온도차에 의해 발생되는 인장응력을 감소시키기 위해 단열재와 9% Ni 강재로 이루어진 코너프로텍션이 2차 방벽으로 설치된다. 본 눈문에서는 유한요소법을 이용하여 코너프로텍션의 직사각형 너클형상과 원형 너클형상에 따른 구조해석을 실시하여 Von-Mises 응력과 용접부의 피로수명을 예측하였다. 구조해석 결과 안전계수는 원형 너클이 직사각형 너클보다 23% 크게 나타났고, 피로수명은 원형 너클이 직각 너클보다 21% 크게 나타났다. 동 결과를 이용해서 향후 코너프로텍션의 수명평가 및 최적설계 등에 활용이 가능할 것이다.

• 한국의류산업학회지
• /
• 제23권6호
• /
• pp.781-789
• /
• 2021

To enhance the design and comfort of waist-protection corsets, this study analyzed the product characteristics of five types of posture-correction corsets that are available commercially. Additionally, subjective evaluation of the corsets was conducted on women aged 20 to 60 years, in terms of design, material preference, fit, comfort, degree of correction, freedom of movement, tightness, and convenience of front fastening. Following product analysis, the five corset types were divided into: two soft, one semi-hard, and two hard types in terms of the degree of elongation. As a result of pattern analysis, the soft type was designed to improve fit by reflecting the body curvature, whereas the semi-hard and hard types were relatively flat. Through the wearing sensation assessment, the hard type manufactured by company S was the best in terms of design, material, fit, comfort, correction degree, and freedom of movement. The soft type was average in design, material, and fit while relatively poor in the correction degree and tightness. The results indicated that soft materials, flexible bones with appropriate tension, patterns designed to snugly fit the body with large curvature at the top and bottom for better inflection, and adjustable support belts that can be double-fixed are crucial elements in improving the corset design to boost the comfort of wearing. These study results are helpful in the development of waist-protection corsets with excellent wearing comfort and design appreciated by customers.

• Water Engineering Research
• /
• 제1권1호
• /
• pp.83-92
• /
• 2000

Jet flow can occur by gate opening at downstream of a hydraulic structure such as weir of drainage gate. If the stream bed is not hard or the bed protection is not sufficient, vortex erosion occurs and a resulting scour hole will be formed due to the high shear stress of the jet flow. Once the scour hole is formed, a vortex occurs in ti and this vortex causes additional erosion. If this erosion continues and reaches to the hydraulic structure, it can undermine the bottom of the hydraulic structure and this will lead to failure of the structure itself. Thus, it is necessary to define the physical features of the vortex structure in the scour hole for the design of the bed protection. This study presents the turbulent vortex structure in the scour hole by the gate opening of the hydraulic structure. Characteristics of vortex motion, circulation, vortex scale and vortex were analyzed through experiments. Experimental results of the vortex velocity were compared with theoretical ones. From these, circulation and vortex scale were obtained with known values of inflow depth, inflow velocity and scale of scour hole

• Journal of Radiation Protection and Research
• /
• 제26권3호
• /
• pp.225-229
• /
• 2001

In Korea, an advanced reactor system of 330MWt power called SMART (System integrated Modular Advanced ReacTor) is being developed by KAERI to supply energy for seawater desalination as well as electricity generation. A shielding design of the SMART core with 49 CEDM is established by a two-dimensional discrete ordinates radiation transport analyses. The DORT two-dimensional discrete ordinates transport code is used to evaluate the SMART shielding designs. Three axial regions represent the SMART reactor assembly, each of which is modeled in the R-Z geometry. The BUGLE-96 library is used in the analyses, which consists of 47 neutron and 20 gamma energy groups. The results indicate that the maximum neutron fluence at the bottom of reactor vessel is $5.89 {\times} 10^{17}\;n/cm^2$ and that on the radial surface of reactor vessel is $4.49 {\times} 10^[16}\;n/cm^2$. These results meet the requirement, $1.0 {\times} 10^{20}\;n/cm^2$, in 10 CFR 50.61 and the integrity of SMART reactor vessel during the lifetime of the reactor is confirmed.

• Journal of Radiation Protection and Research
• /
• 제13권1호
• /
• pp.21-30
• /
• 1988

부산의대 부속 병원의 전자선형가속기 (Mevatron 67) 장치를 이용 하여 표면선량의 원인이 되는 광자선의 전자오염에 대한 연구를 하였다. 표면선량은 조사야의 크기에 따라 증가하는 경향을 나타내었다. 빔내에 트레이를 설치했을 때와 트레이를 제거했을때 표면선량의 변화와 전자오염정도를 관찰하였다. 전자오염을 감소시키기 위해서 구리 필터를 트레이 밑에 부착하여 그 효과를 분석하였다. 아울러 거리를 변화 시켜가며 선량의 변화를 관찰하여 최대의 피부보호효과를 유지할 수 있는 최적의 SSD와 TSD를 구하였다. 이런 모든 결과들은 방사선 치료 환자의 피부보호에 이용될 것이다.

• 대한안전경영과학회지
• /
• 제16권3호
• /
• pp.165-173
• /
• 2014

This study is about determination of fire origin by using analysis of shadow that was recorded CCTV data at the fire scene. This analysis is based on straight and radiate nature of light. At fire experiment with about 1m flame, we conformed that 2-dimensional extension line is focused at the bottom of the fire. If the fire is burning at the same level with shadow, it indicate the point of origin exactly. In 3-dimensional analysis that connect extensional line between distinctive points the shadow and the objet, the line focused in the ${\emptyset}$ 50cm-circle. We estimate the reason of that is because of the character of combustion of gases. The line indicate not the point of origin but the flame that is over the point of origin. thus, you have to consider the line indicate the flame when you do 3-dimensional analysis.

• Journal of Radiation Protection and Research
• /
• 제28권4호
• /
• pp.291-298
• /
• 2003

The KN-12 transport cask has been designed to transport 12 PWR spent nuclear fuel assemblies and to comply with the regulatory requirements for a Type B(U) package. The containment boundary of the cask is defined by a cask body, a cask lid, lid bolts with nuts, O-ring seals and a bolted closure lid. The containment vessel for the cask consists of a forged thick-walled carbon steel cylindrical body with an integrally-welded carbon steel bottom and is closed by a lid made of stainless steel, which is fastened to the cask body by lid bolts with nuts and sealed by double elastomer O-rings. In the cask lid an opening is closed by a plug with an O-ring seal and covered by the bolted closure lid sealed with an O-ring. The cask must maintain a radioactivity release rate of not more than the regulatory limit for normal transport conditions and for hypothetical accident conditions, as required by the related regulations. The containment requirements of the cask are satisfied by maintaining a maximum air reference leak rate of $2.7{\times}10^{-4}ref.cm^3s^{-1}$ or a helium leak rate of $3.3{\times}10^{-4}cm^3s^{-1}$ for normal transport conditions and for hypothetical accident conditions.