Estimation of Rock Erodibility due to Energy Dissipation of Inflow Passing through the Sluice Gate of Seadike

배수갑문 유입수류의 에너지 감쇠에 따른 암석 침식 가능성 추정

  • 조진훈 (농업기반공사 농어촌연구원) ;
  • 박영진 (농업기반공사 농어촌연구원) ;
  • 박상현 (농업기반공사 농어촌연구원 수리시험장)
  • Published : 2000.04.01

Abstract

Sihwa seadike is originally designed to control the water level In lake Sihwa. However the sluice gate is being operated everyday to preserve the water quality of lake. Due to the frequent operation of gates the bottom of drainage canal which is composed of weathered rock and soft rock is being scoured. Recently the bottom in the front area of apron was protected by putting underwater concrete. This study is carried out to understand the hydraulic situation for protection, and to estimate the trend of scouring by comparing between energy dissipation and registance of bottom rock. Annandale(1995) introduced the erodibility index theory, and suggested a criteria to judge the erodibility of rock through the relation between the erodibility index and energy dissipation. Determenation of erodibility index of rock is based on the results of sample core analysis, and the energy dissipation of flow is calculated from the estimation of total head on the scale model. These two values are plotted on the criteria, and the erodibility of rock is determined.

시화배수갑문은 당초 내측 담수호의 수위관리를 위하여 설계되었으나 호수의 수질 악화를 방지하기 위하여 배수갑문을 당초 계획보다 잦은 빈도로 작동시키고 있다. 이에 따라 강한 유입 흐름의 영향을 받는 내측 배수로의 바닥이 상당히 넓은 범위에 걸쳐 침식되고 있다. 최근에 침식이 진행되는 것을 막기위하여 에이프런 전면부 일부 구간을 수중콘크리트로 타설하여 바닥보강을 시행하였다. 본 연구는 수리모형실험을 통하여 바닥보강 시행 이전과 이후에 대하여 수리현상을 파악하고 유입흐름의 에너지 변화와 바닥 암석의 저항력 등을 파악하여 향후 침식의 추이를 예측하기 위하여 실시하였다. Annandale(1995)은 침식지수 이론을 도입하여 많은 실험을 통하여 침식지수와 흐름의 에너지 감쇠 간의 관계를 파악하였으며 암석의 침식여부를 판단할 수 있는 기준을 제시하였다. 암석의 침식지수는 지질조사에서 시추한 시편의 분석결과를 토대로 결정하였으며 수류의 에너지 감쇠는 수리모형실험 결과로부터 전수두의 감쇠량의 추정을 통하여 계산하였다. 이와 같이 결정된 두 값을 주어진 기준도상에 도시하여 그 위치에 따라 침식가능성을 판단하였다.

Keywords

References

  1. Annandale, G.W., and Kirsten, H.A.D. (1994), 'On the Erodibility of Rock and Other Earth Materials.' Proc. Hydraulic Engeering'94, ASCE, Buffalo, New York, August, pp. 68-72
  2. Annandale, G.W., (1995), 'Erodibility.' Journal of Hydraulic Research. Vol. 33, No.4, pp. 471-494
  3. Bell, F.G., (1992), Engineering properties of soils and rocks, 3rd, ed. Butterworth Heinemann Ltd., Oxford, Chapter 7
  4. Deere, D.U., and Deere, D.W. (1988), 'The rock quality designation (RQD) index In practice.' Rock Classification Systems for Engineering Purposes: ASTM STP-984, L. Kirkaldie (Ed.), American Society for Testing and Materials, Philadelphia, pp. 91-101
  5. Fiorotto, V., and Rinaldo, A. (1992), 'Turbulent pressure fluctuations under hydraulic jumps' Journal of Hydraulic Research, Vol. 30, No.4, pp. 499-520
  6. Geological Society of London, (1997), 'The description of rock masses for engineering purposes', Report by the Geological Society Engineering Group Working Party, Quarterly Journal of Engineering Geology, Vol. 10, Great Britain, pp. 355-388
  7. International Society of Rock Mechanics (Committee on Standardization of Laboratory and Field Tests), (1978), 'Suggested methods for the quantitative description of discontinuities in rock masses.' International Journal of Rock Mechanics, Min. Sci. & Geomech Abstr., Vol. 15, pp. 319-368 https://doi.org/10.1016/0148-9062(78)91472-9
  8. Kirsten, H.A.D., (1988), 'Case histories of groundmass characterization for excavatability.' Rock Classification System' for Engineering Purposes, ASTM, STP 984, L. Kirkaldie, (Ed,), pp. 102-120