• International Journal of Safety
• /
• 제3권1호
• /
• pp.15-19
• /
• 2004

A new tower internal, which is called CSE, is presented. The CSE is composed of a nozzle perforated in its bottom along the entire periphery and equipped with a multi vane axial swirler at the inlet and hollow cylindrical separator at the outlet of the nozzle. According to the experimental work for obtaining the necessary hydraulic information of the CSE, which is used for preliminary design of a separation column, the CSE showed a stable operation over the wide rage of gas/liquid ratio. However, it caused large pressure drop due to the high gas velocity which should carry liquid droplets through the element. The high pressure drop may cause problems in energy recovery and the application of the CSE can be limited to the high pressure columns. Assuming that the tray efficiency of the CSE is the same with the existing separation columns, the results of the column design showed the size reduction of the column diameters by 30 to $40\%$ and investment cost saving, depending on operating conditions. The application of the CSE to separation column may also contribute to the de-bottlenecking the existing column.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2004년도 추계학술대회 논문집
• /
• pp.44-47
• /
• 2004

Vortexing might occur during draining from tanks which reduces the rate of outflow. This phenomenon has practical relevance in the fuel feed system in space vehicles and rockets. Due to environmental disturbances rotational motion can be generated in the liquid-propellant tank, which in turn can affect the rate of outflow to the engines. The phenomenon is initialized by rotating the fluid In the experimental tank. The dip quickly develops into a vortex with an air core, which extends to the bottom port, reducing the effective cross-sectional area of the drain outlet and consequently the flow rate. Flow characteristics are investigated using SPIV(Stereoscopic Particle Image Velocimetry) method.

• 한국관개배수논문집
• /
• 제17권2호
• /
• pp.28-34
• /
• 2010

This study re-exams hydrologic stability on spillway outlet capacity of agricultural reservoirs using hydrologic data with current rainfall condition instead of project hydrologic data applied at design on Backgok reservoir located in Chungbuk province. It is concluded that Backgok reservoir is not hydrologically stable and therefore structural measures including the extension of spillway and non structural measures should be taken. Continuous basic plan for river maintenance including additional bank reinforcement to bottom river shall be carried out. Due to high peak flood with more than 290% compared to 200 year frequency probability flood which was design standard of the past in view of the results of calculating PMF according to revised design standard for reservoirs, there could a problem for securing rationality in case of applying PMF with design flood. Therefore, hydrological stability, construction, and maintenance cost shall be synthetically studied and reasonal application shall be made if the decision is made on applying PMF with design flood.

• 한국식물병리학회지
• /
• 제10권4호
• /
• pp.292-296
• /
• 1994

Main tobacco diseases were surveyed on tobacco plants in the northern Kyeongbuk area to evaluate the effectiveness of current disease control techniques from 1993 to 1994. The major disease in seedlings was the anthracnose (Colletotrichum tabacum) but the mosaic (TMV) in adult plants. Wild fire (Psedomonas syringae pv. tabaci) and hollow stalk (Erwinia carotovora subsp. carotovora) were more severe in 1993 than those in 1994 because of more rain. Establishment of drain-outlet at the bottom of the temporary transplanting pot gave a significant reduction in anthracnose severity. Most farmers have ignored the protection effect of using milk during transplanting and the removal of diseased roots from the fields on mosaic (TMV). It was considered that the educating program on disease diagnosis and fungicide application might help farmers for the proper use of chemicals.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.1398-1405
• /
• 2008

As the structure, material and construction of building develop continuously, so the recent residential buildings are being large, high-rise and group. High-rise residential buildings consume a lot of energy on supplying cold and hot water. As well, high-rise residential buildings bring on discomfortable use and unexpected conditions on account of faucet outlet pressure rise and the difference of water supply pressure between top floor and bottom floor. Thus, the purpose of this study is to research on using conditions of cold and hot water supply system through survey and field measurement in high-rise residential buildings and to analyze problems.

• 한국물환경학회지
• /
• 제28권5호
• /
• pp.686-692
• /
• 2012

This study illustrates how to design and evaluate a non-point sources management detention pond using SWMM. In particular, special attention is given to the orifice design. In SWMM, orifice properties that need to be defined include its height above the bottom of the storage unit, its type, its geometry and its hydraulic properties. Among the various characteristics of orifice, the orifice hole size which is closely related to hydraulic retention time is focused in this study. Sensitivity analysis of orifice size in annual non-point sources reduction efficiency is carried out. In addition, a methodology which can be used to design a virtual junction in SWMM has been proposed to quantify water quality improvement triggered by the detention pond installation. As a result, it is recommended that a detention outlet should be designed to be about 2 to 3 days of hydraulic retention time.

• 한국산업융합학회 논문집
• /
• 제26권2_2호
• /
• pp.255-263
• /
• 2023

The shell and tube-type heat exchangers have been frequently used in many industrial field because of its simple structure and wide operation conditions and so on. The purpose of this study is to investigate the flow characteristics in single shell of shell and tube-type heat exchanger according to velocity and temperature of hot air released from heat exchanger simulator through numerical analysis. As the results, the temperature was decreased in almost quadratic curve from top to bottom in single shell of the shell and tube-type heat exchanger. Further the changes of pressure and velocity in outlet according to change of inlet temperature were not observed. The cost for operating the shell and tube-type heat exchanger should be compared the supply cost of hot air with that of velocity in order to make a economic decision.

• 터널과지하공간
• /
• 제22권6호
• /
• pp.449-461
• /
• 2012

화력발전소에서 발생하는 석탄회를 지반침하의 방지를 위하여 갱내충전용으로 사용하고자 한다. 따라서 영동화력발전소에서 발생하는 석탄회를 이용하여 기본적인 물리적 특성 및 유동 특성을 파악하였으며, 한보탄광의 제1사갱을 대상으로 모형갱도를 제작하여 총 8회의 수압식 충전실험을 수행하였다. 석탄회의 비중은 2.34이고 입도분석결과 실트질 모래인 SM에 해당한다. Slump 시험 및 Flow 유동시험 결과 석탄회 70 wt,% 이하에서 액상형태로 나타나므로 모형충전실험에서는 석탄회 60 wt,%를 적용하였다. 모형충전시험결과 갱내수 유, 무에 상관없이 토출구를 사갱이나 수갱 바닥에 위치시키는 것이 충전효율을 향상시키는데 유리한 방법임을 확인하였다.

• Journal of Biosystems Engineering
• /
• 제14권4호
• /
• pp.272-281
• /
• 1989

It is desirable for the vertical wind tunnel which can build uniform air flow across the vertical duct to be used for the purpose of the investigation of the aerodynamic properties of grains. This study was conducted to examine how the air velocity profile in the vertical duct is influenced by the various alternations of the elements of the wind tunnel, and to prepare design guidance of the vertical wind tunnel which can be used for investigating aerodynamic properties of grains. In addition, several tests were conducted to locate the test section which can be applicable for determining the terminal velocity of grain. The following conclusions were obtained from the study: 1. The size and the location of the outlet of the plenum chamber should be determined such that the outlet air flow is less affected by the air flow and the back pressure by the side wall of the chamber. 2. The honeycomb was not helpful for attaining uniform air flow in case that the air flow profile at the bottom of the vertical duct is serverely different from the ideal one. 3. Even though considerable pressure drop was resulted from the screens installed within the vertical duct, the screens were helpful for attaining uniform air flow in the duct. 4. It is desirable for the test section to be located at the position that not only the air flow of the duct is not disturbed by the distorted back pressure in the plenum chamber, but also less boundary layer is developed.

• 분석과학
• /
• 제26권1호
• /
• pp.34-41
• /
• 2013

SPLITT Fractionation (SF)는 콜로이드 입자 및 거대분자들을 둘 혹은 그 이상의 부분(fraction)으로 분획하는 기술이다. SF에서는 시료를 지속적으로 주입하므로 대용량 분획이 가능하다. 일반적으로, SF에서는 얇은 리본모양의 채널을 이용하는데, 채널의 입구와 출구부분에는 각각 flow stream splitter가 설치되어 있어서 채널의 입구와 출구가 위 아래로 두 개씩 존재한다. SF에는 두 가지 작동방법이 있는데, 하나는 conventional mode 이고 다른 하나는 전액 공급 모드(full feed mode, FFD)이다. FFD 모드에서의 분리도는 conventional mode 에 비해 떨어지지만, FFD 모드에는 몇 가지 독특한 장점이 있다. FFD 모드에서는 용매의 주입이 필요하지 않으므로 채널의 디자인 이나 작동이 더 간단하다. 따라서 입구 쪽에 flow stream splitter를 필요로 하지 않으며, 시료와 용매를 주입하기 위하여 두 개의 펌프가 필요한 conventional 모드와는 달리 한 개의 펌프만으로 작동이 가능하다. 또한 용매의 주입이 없으므로 시료가 희석되지 않는다. 이는 환경시료와 같이 콜로이드의 농도가 낮은 시료를 분획하고자 하는 경우 유리하다. 농도가 낮은 환경시료의 분획을 위해서는 종종 농축이 필요하다. 본 연구에서는 입구에는 물론 출구에도 splitter를 사용하지 않는 새로운 대용량 FFD 모드 SF 장치를 만들었다. Splitter가 없으므로 장치를 대형화 할 수 있어서 시료처리량(throughput, TP)을 크게 증가시킬 수 있었다. 산업용 폴리우레탄(polyurethane, PU) 라텍스 입자들을 이용하여 새로운 SF 장치를 테스트하였으며, 폴리아크릴레이트(polyacrylate, PA) 입자를 대상으로 새로운 SF 장치의 TP를 확인하기 위하여 유속 및 $d_c$에 따르는 TP의 변화를 조사하였다.