• Journal of the Korean Society for Marine Environment & Energy
• /
• v.19 no.4
• /
• pp.274-285
• /
• 2016

In order to elucidate the spatiotemporal variations of marine environmental parameters, we collected seawater samples in the middle east coast of Korea in 2013-2014. A high temperature and low salinity were distinctively observed in the summer and a low temperature and high salinity pattern in the winter. The temperature of the bottom water was in the range of $2^{\circ}C$ to $7^{\circ}C$, with the temperature being relatively high in the winter, while the salinity was measured to be around 34, with no large differences across the seasons. The dissolved oxygen concentrations were in the range of $7mg\;L^{-1}$ to $12mg\;L^{-1}$, and it was relatively high in May compared to other seasons. The seawater temperature and dissolved oxygen concentration at the surface layer showed a significant negative correlation in the autumn and winter seasons, based on which it is seemed that water temperature is the main factor controlling the amount of dissolved oxygen in the autumn and winter seasons. The dissolved inorganic nitrogen (DIN) and silicate (DSi) increased 11- and 7-fold, respectively, in the winter compared to the summer. The DIN to DIP (dissolved inorganic phosphorus) ratio for the surface seawater was approximately 16, but it was relatively low in the spring season. On the other hand, the DIN to DIP ratio was relatively high in the summer. Based on this, it is seemed that nitrogen and phosphorus were the growth-limiting nutrients for phytoplankton in the spring and summer, respectively. Water quality was I (excellent) ~III (medium) level at the most stations except for some stations (level IV) during the autumn season, having low dissolved oxygen saturations.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.10 no.2 s.21
• /
• pp.69-79
• /
• 2004

This study focuses on the relationship between pollution factors around Masan, Changwon and Chinhae city considerd as main pollution sources and marine environment in Masan bay of Korea. Water quality data measured In Jinhae bay and environmental investigation data in Masan, Changwon and Jinhae cities from 1981 to 1998 were used for this study. Annual means and standard deviations of COD, DIN and DIP concentrations from 1981 to 1998 showed that both their concentration and fluctuations were higher in the inner part of Masan bay (region A) than near Somodo (region B). Sediment dredging in Masan bay had been done from 1990 to 1994. After dredging, COD concentration has been decreasing In surface layer. Also water pollution was gradually spreaded from the inner part to the outer part of the bay due to the continuous inflow of domestic sewage and industrial wastewater. In the late of 1990s, the pollution was heavier. DIN and DIP concentrations were found to be increased by establishment of industry complex and decreased by sewage treatment plant near the city adjacent to Jinhae bay, 1993. The correlation between COD, DIN and DIP changes and neighbor cities' pollution sources were calculated From 1981 to 1998, correlation coefficient (r) was over 0.8 except for the bottom of region A From 1981 to 1998, r between the DIP concentration and population was over 0.65 except for the surface of region A, and the r between the DIP and the number of factories was over 0.6 too, in region B.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.7
• /
• pp.530-535
• /
• 2011

In this work, the adsorption characteristic of the composites by adding loess with aluminum ("Al-loess") and Loess with lanthanum ("La-loess") which have been developed to effectively remove phosphorus, the substance which causes the eutrophic lake has been evaluated. According to the result of the work, as the amount of aluminum or lanthanum put in 1g of loess increases, the combined amount also increases accordingly. When the loess with no aluminum or lanthanum attached was used, the rate of removing phosphorus was different in comparison with the case of using the composites of 0.5, 1 and 2 mg of aluminum and 0.5, 1 and 3 mg of lanthanum in each gram of loess. It was observed the amount required to remove 1 mg $PO_4^{3-}$-P/L of phosphorus completely is approximately 2 to 10 times less for the composite of Al-loess than loess alone. Also, in case of the composite of La-loess, the amount was decreased by about 1.5 to 10 times. In order to observe the rate of adsorption phosphorus with Al-loess and La-loess, the composites were used for the observation up to three times by water washing. As a result, the water washing of the composite did not affect phosphorus removal. According to the effect of pH, there is a high rate of removing phosphorus in the pH range of 5~8. It seems that the developed composite will effectively remove phosphorus when it is spread in the natural water system. Also, since Al-loess and La-loess composites are rapidly precipitated within 30 minutes, it is stabilized quickly at the bottom of the eutrophic lake and becomes responsible for the removal of phosphorus in water and eluted from the water and the sedimentary layer.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.14 no.3
• /
• pp.205-211
• /
• 2011

On board comparison of pH and total alkalinity measurement in seawater was carried out during the JES expedition on R/V Roger Revelle in the East Sea using 550 real seawater samples from the surface to the bottom. Spectrophotometry and potentiometry without liquid junction were compared for pH measurement. The pH values of two methods are generally in a good agreement. Spectrophotometry with a pipette provides higher value compare with the potentiometry in the deep layer, where pH values are lower. However, spectrophotometry without a pipette shows same values with potentiometry within their precision range. The pipetting procedure may remove of $CO_2$ in the sample, which causes increase of pH. Potentiometric titration methods using a closed-cell and an open-cell were compared for the total alkalinity measurement. Values from open cell method are smaller by about 5~10 ${\mu}mol\;kg^{-1}$ than those from closed cell method. This may be caused by the bubble formed in the closed cell during the experiment. Although any analytical method compared in this study for the pH or TA measurement can be applied, special attentions should be paid for satisfactory results.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.8 no.3
• /
• pp.121-126
• /
• 1975

Chlorophyll a content in marine phytoplankton and nutrient in seawater were determined to study the influence of eutrophication of Jinhae Bay area on primary production. Sampels were taken in the surface layer and bottom of 21 stations in Jinhae Bay including Masan Bay and Hengam Bay, ana adjacent waters such as Geoje Bay and the estuary of Naktong River for refrence during summer Period in 1974. Chlorophyll a content was ranged from $0.52\;mg/m^3\;to\;25.16\;mg/m^3$ in whole area. Mean value of chlorophyll a was the highest in Masan Bay and the lowest in GeojeBay. It was noteworthy that chlorophyll a content of Hengam Bay was not much higher than that of neighboring ares and rather lower than that of the estuary of Naktong River in spite of high phosphate content. Linear relationship between increase of nutrients and chlorophyll a was found in Masan Bay and the estuary of Naktong River where N/P ratio of nutrients was over 12. This relationship however could not be found in most area of Jinhae Bay where N/P ratio of nutrients was lower than 2 which might due to the wastewater from the Chemical Fertilizer plant. Red tide and low dissolved oxygen waters due to eutrophication were observed during summer period in Masan Bay.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.2
• /
• pp.296-301
• /
• 1998

The physical and chemical characteristics were examined in the southern sea of Korea including the Cheju Strait, and the entrance of the Korea Strait in the period of May 30 to June 8, 1995. The results are as follows. Firstly, the variation ranges of the temperature and salinity at the Cheju Stratit during 24 hours observation were larger in the surface layer than that in the deep layers. Secondly, daily variations of nutrients show that total inorganic nitrogen, phosphate phosphorous, and silicate silicon concentration are higher at night than at day. Thirdly, water temperature and salinity distributions show highest values at the entrance of Korea Strait, which is thought to be influenced directly by Tsushima Warm Current, while they show the lowest values in Cheju Strait. This means that the surface waters in Korea Strait are greatly influenced from the entrance of Korea Strait and bottom waters is greatly influenced from Cheju Strait. Fourthly, nutrients distribution shows highest values in Korea Strait but dissolved oxygen shows lowest values in the area. These seem to be caused by the oxygen consumption used in the inorganization of nutrients to decompose organisms and the liquidation of nutrients.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.46 no.6
• /
• pp.907-916
• /
• 2013

The aim of this study was to compare community structure of larval fish species in the northern East China Sea during normal meteorological conditions in autumn 2009, during the El Ni$\tilde{n}$o period in 2009-2010, and during the La Nina period in 2010. Fifty taxa were recorded during the study period; the most dominant species were Benthosema pterotum and Gobiidae spp. In October 2008 during the normal period, warm water from the Tsushima Warm Current (TWC) intruded more into the surface and middle layers, and cold water affected by the Yellow Sea Cold Water (YSCW) intruded into the bottom layer. In October 2009 during the El Ni$\tilde{n}$o period, intrusion of the China Coastal Water (CCW), which has low salinity (<32.2 psu), was more apparent than intrusion of the TWC or YSCW. In October 2010 during the La Nina period, intrusion of the TWC and CCW was relatively weak, resulting in the lowest temperature and highest salinity observed during the study period in the eastern part of the study area. Hierarchical cluster, one-way ANOSIM (analysis of similarities), and SIMPER (similarity-percentages procedure) analyses provided two main results. First, the abundance of the most dominant larval fish species in autumn of the normal period was greater than that in autumn of the El Ni$\tilde{n}$o/La Nina periods, resulting in a significant difference in ichthyoplankton community structure between the periods. The abundance of Benthosema pterotum increased in the normal period, possibly influenced by the intrusion of cold water from the YSCW; the abundance of species residing in Korean waters (e.g., Gobiidae spp.) probably decreased during the El Ni$\tilde{n}$o/La Nina periods. The second finding was that the abundance of subtropical larval fish in autumn of the normal period was generally larger than that during autumn of the El Ni$\tilde{n}$o/La Nina periods. This could have been induced by the stronger intrusion of warm water from the TWC during the normal period. Although differences in oceanographic conditions between El Ni$\tilde{n}$o and La Nina periods were observed, the differences in ichthyoplankton community structure between the two periods were not significant.

• Journal of the Korean Geophysical Society
• /
• v.1 no.1
• /
• pp.59-68
• /
• 1998

Ground penetrating radar (GPR) experiments were performed in a sand tank to study the ability of detection of buried pipes and to characterize the signal of the reflection wave. The ratios of diameter of buried pipes to the depth were set 4 up to 24 % and materials were metal, synthetic resin, and wood. In case of groundwater table below buried materials, strong reflection signals were observed irrespective of diameter and depth except for wood. While it is very difficult to detect the reflection signals in case that the groundwater table is set to higher than buried materials. The reflection signals from the bottom of the sand tank, however, were clearly observed even in case of higher groundwater table. This implies that the weak reflection signals from the buried materials are not all due to the wave attenuation. The vertical reflection profiling method is recommended in case that the object of the survey is to find horizontal position of buried material because this method has the advantage in cost and time of survey. However, the full or partial CMP gather method is recommended in case that the objects of the survey are to get the detailed subsurface information, i.e. the depth to buried material, interval velocity of geological layer, and mapping the groundwater table.

• Journal of Korea Soil Environment Society
• /
• v.2 no.1
• /
• pp.51-61
• /
• 1997

The objective of this study is to evaluate the feasibility of Pumping-and-Treatment system (PTS) for remediation of the saturated zones contaminated with NAPLs. A simulation is carried out for the removal of DNAPLs (denser-than-water non-aqueous phase liquids) and LNAPLS (lighter-than-water non-aqueous phase liquids) distributing at and below the water table. In the study, LNAPL and DNAPL are assumed to be n-hexane and 1,1-dichloroacetone, respectively. The model system studied consists of four heterogeneous soil layers with different permeabilities. Groundwater flows through the bottom layer and a pumping well is located under the initial water table. The time-driven deformation of the water table and removal efficiency of contaminants are estimated after vacuum application to the inlet of the well. In the calculation, FVM (Finite Volumetric Method) with SIMPLEC algorithm is applied. Results show that removal efficiencies of both DNAPL and LNAPL are negligible for the first 5 days after the PTS operation. However, when the cone-shape water table is formed around the inlet of the pumping well, the rapid removal rate is obtained since NAPLs migrate rapidly through the curvature of the water table. The removal efficiency of DNAPL is estimated to be higher than that of LNAPL due to the gravity. The results also show that the fluctuation or cone-shaped depression of the water table enhances the removal efficiency of NAPLs in saturated zones. The simulation results could provide a basis of the PTS design for the removal of NAPLs in saturated zones.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.570-576
• /
• 2002

Application of the aged Inconel 718 in hydrogen environment is seriously restraint by its high hydrogen embrittlement (HE) sensitivity. m previous researches, we have suggested the possibility and applicability of the laser surface annealing (LSA) process in improving the HE resistance of this alloy. Sequentially, a study on the effects of the precipitates in the Inconel 718 on its HE sensitivity was conducted in this research. Firstly, flat bar specimens were heat-treated to obtain various kinds of precipitation microstructures concerning the ${\gamma}$" phase and the 6 phase. Hydrogen was charged into the specimen by a cathodic charging process. The loss in reduction of area (RA) caused by hydrogen charging was used to assess the HE sensitivity. The HE sensitivity of the alloy was lowered with decreasing the volume fraction of ${\gamma}$". Moreover, it was possible to increase the HE resistance of the aged alloy by dissolving the $\delta$ phase, keeping the strength at the same level as that of the common aged alloy. Thus, we concluded that both the $\delta$ phase and the ${\gamma}$" phase affected the HE sensitivity of Inconel 718. Next, two kinds of notch tensile specimens were fabricated, one kind having $\delta$ phase and the other having no $\delta$ phase. All these specimens were aged via the same aging heat treatment process. The LSA process annealed a thin layer of the notch bottom of each specimen. One specimen of each kind was charged with hydrogen by the cathodic hydrogen charging process. Loss in the notch tensile strength (NTS) caused by hydrogen was used to evaluate the HE sensitivity. It was found that while the HE sensitivity of conventionally aged Inconel 718 was decreased by the LSA process, the HE sensitivity of the $\delta$-free aged Inconel 718 could further be decreased. Therefore, for applications in hydrogen environments, it is possible to fabricate alloys with both good HE resistance and high strength by controlling the precipitation conditions, and to improve HE resistance further via applying the LSA process.