• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.52-52
• /
• 2012

최근 선진국을 중심으로 제조기술의 산업혁명이라고 불릴 정도로 큰 파급효과가 기대되는 자기조립기반의 산업공정기술을 확보하기 위한 많은 노력과 연구들이 활발하게 진행되고 있다. 자기조립(Self-Assembly) 현상은 자연에서 일어나는 자발적인 힘으로 원자 또는 분자 단위까지 구조물을 제어하고 bottom-up 방식(상향식: 원자/분자 스케일의 나노구조를 배열/조립하여 원하는 형태의 패턴을 만들어 내는 방식)으로 원하는 구조물을 설계/제작할 수 있는 능력을 가지고 있다. 기초적인 과학으로부터 출발한 자기조립기술은 최근 자기조립 응용개발에서 많은 성과를 이루어내면서 산업화 가능성을 크게 하고, 과학계와 산업계의 많은 관심을 불러일으키고 있다. 반도체 산업기술을 예측하는 ITRS 로드맵(2005년)에 의하면 directed self-assembly 방법이 새로운 미래 패터닝 기술로 개발되어 2016년경에 사용되고, 자기조립소재로 제작된 다양한 응용소자들은 새로운 미래소자로 개발될 것으로 예상하고 있다. 이에 맞추어 국내 기업들도 diblock copolymer를 이용한 나노패터닝 기술 확보를 위한 연구를 진행하고 있다. 또한 IBM은 자기조립기술을 반도체공정에 실험적으로 적용하여 자기조립기술이 생산 공정에 부분적으로 적용될 가능성이 크다는 것을 보여주었다. 산업계와 함께 학계의 연구센터에서는 산업화를 위한 자기조립 집적화 공정(Integrated process) 개발을 이루기 위하여 체계적으로 연구를 실시하고 있다. 미국의 Northeastern 대학의 CHN(Center for high-rate Nanomanufacturing) 연구센터는 자기조립 집적화에 용이한 새로운 개념의 소자를 제안하고 이를 집적화하기 위한 다양한 공정을 개발하고 있으며, Wisconsin 대학의 NSEC(Nanosacle Science and Engineering Center) 연구센터는 diblock copolymer를 이용한 나노패터닝 기술 개발에서 획기적인 결과를 도출하여 산업계에 적용될 가능성을 높이고 있다. 이와 같은 결과들로부터 앞으로의 자기조립기술에 대한 연구는 3차원 구조물을 제작할 수 있는 집적화 공정에 집중될 것이고, 이를 위하여 새로운 개념의 단순한 구조의 응용소자개발도 함께 추진될 것으로 판단된다. 또한 실용 가능성이 큰 집적화 공정으로 개발하기 위하여 기존의 top-down 방식을 접목한 bottom-up 방식의 자기조립 집적화 공정이 개발될 것으로 예상하고 있다. 이와 함께 자기조립공정은 반복되는 구조를 쉽게 제작할 수 있는 장점을 가지고 있어 다양한 응용소자 [태양전지(solar cell), 연료전지(fuel cell), 유연성 있는 전자기기(flexible electronics), 화면표시 장치(display device)] 제작에 쉽게 이용되어 새로운 산업을 창출할 수 있는 가능성을 보이고 있다. 본 자기조립 연구 센터에서는 이와 같은 자기조립 특성을 제조공정에 적용하여 혁신적인 제조공정기술을 확보하고자 연구를 진행하고 있다. 그러므로 본 발표에서 이와 같은 연구 흐름과 함께 본 센터에서 진행하고 있는 자기조립 제조방법을 소개하고자 한다. 이와 함께 자기조립방법을 이용하여 제작된 다양한 응용소자 개발 결과를 발표하고, 이를 top-down 방식과 접목하여 집적화공정으로 개발하는 전략을 함께 소개하고자 한다.

• Geophysics and Geophysical Exploration
• /
• v.13 no.4
• /
• pp.323-329
• /
• 2010

Three deconvolution methods were applied to stacked seismic data obtained to investigate gas-hydrates in the Ulleung Basin, East Sea: (1) minimum-phase spiking deconvolution, (2) minimum-phase spiking deconvolution using an averaged wavelet from all traces, and (3) deterministic deconvolution using a wavelet with phases computed from well-logs. We analyzed the resolving property of these methods for lithological boundaries. The first deconvolution method increases temporal resolution but decreases lateral continuity. The second method shows, in an overall sense, similar results to the spiking deconvolution using a minimum phase wavelet for each trace; however, it results in a more consistent and continuous bottom-simulating reflector (BSR) and better resolved sub-BSR reflectors. The results from the third method reveal more detailed internal structures of debris-flow deposits and increased continuity of reflectors; in addition, the seafloor reflection and the BSR appear to have changed to a zero-phase waveform. These properties help more precisely estimate the distribution and reserves of gas hydrates in the exploration area by improving analysis of facies and amplitude of the BSR.

• Korean Journal of Materials Research
• /
• v.9 no.3
• /
• pp.244-250
• /
• 1999

MOCVD TiN films were prepared from a new TiN precursor, tetrakis(etylmethylamino)titanium (TEMAT) and ammonia. Deposition of TiN films from a single precursor, TEMA T yielded the growth rates of $70 to 1050\AA$/min, depending on the deposition temperature. Furthermore, the excellent bottom coverage of -90% over $0.35\mu\textrm{m}$ contacts was obtained at $275^{\circ}C$. The addition of ammonia to TEMA T lowered the resistivity of as- deposited TiN film to ~ $800\mu\omega-cm$ from $3500~6000\mu\omega-cm$ and improved the stability of TiN film in air. Examination of the films by Auger electron spectroscopy(AES) showed that the oxygen and carbon contents decreased with the addition of ammonia. However, increasing ammonia flow rate decreased the bottom coverage of TiN films over $0.5\mu\textrm{m}$ contacts, probably due to the high sticking coefficient of intermediate species produced from the gas phase reaction of TEMA T and ammonia. Based on the byproduct gases detected by the quadrupole mass spectrometer (QMS), the transammination reaction was proposed to be responsible for TiN deposition. In addition, XPS analysis revealed that the carbon in the films made from TEMA T and ammonia was metallic carbon, suggesting that $\beta$-hydrogen activation process occurs competitively with the transammination reaction.

• Journal of the Korean Society of Costume
• /
• v.65 no.3
• /
• pp.76-90
• /
• 2015

This is a basic study of the two remaining armors (artifacts number K2366, K2368) from the late Joseon dynasty that is part of the Korean costume collection, which is preserved in the Mission Museum of Saint Ottilien in Germany. The armor No. 1 (artifacts number K2366) is a coat-styled armor with brass studs. It has a U-shaped neckline with the non-overlapping collars and sleeve straight-lined inseam. The armor No. 1 has the Mu to the sides and is not back slit. Both its inner and outer material are padded with cotton. Leather mails are attached on the inner lining, and studs are attached on the outer lining to match the leather mails. For this reason, the armor No. 1 can be named MyeonPiGab (brass studded armor consisting of a cotton coat with internal leather mails). The outer material is faded to have the natural white, or antique white look and the patterns on it are indigo blue. The inner material is blue, but the original color is unknown since it is faded. The lotus blossoms and vine patterns are dyed on the surface of the outer material and a name is written on the inner material. The armor No. 1 was worn between the late 17th century and the 19th century. It is estimated that it was worn by military officers who were above the mid-rank in the end of the Joseon dynasty. The armor No. 2 (artifacts number K2368) is a coat-styled armor with brass studs and a low-cut U-shaped neckline. The armor No. 2 has a slit on the left armpit and a string around it. Studs are evenly attached on the armor. The iron mails are attached to the left chest area on its inner lining. It seems that it was designed with both formality and functionality in mind. The outer material is red flannel, the inner material is blue satin and the pads are cheesecloth. The side of its collars, cuffs, front lines, sidelines, back slit, and bottom lines are trimmed with fur. There are armors called "JeonCheolGap (brass studded armor consisting of a felt coat with internal iron mails)," which is similar to the armor No. 2, however, the similarities are limited because they are not made of the same material nor do they follow the same principle of nomenclature.

• Proceedings of the KIPE Conference
• /
• 2009.11a
• /
• pp.105-110
• /
• 2009

The On Line Electric Vehicles(OLEV) that can pick up inductive power from underground coils on driving with high efficiency have been developed this year, and is now proposed in this paper. The IPS(Inductive Power Supply) system consists of power supply inverters, power supply rails, pick up modules, and a regulator. There are 3 generations of IPS have been developed so far, and the $4^{th}$ generation IPS is being developed. The $1^{st}$ generation has been demonstrated this Feb. 27, which is equipped with mechanically auto tracking pick-up module with 1cm air gap, and showed 80% power efficiency. The $2^{nd}$ generation IPS applied to an 120kW (average)/240kW(peak) motor powered electric bus has 17cm air gap with 72% power efficiency. For the $2^{nd}$ generation IPS, the Power supply inverter has 440V, 3phase input and 200A @ 20kHz output. The test power supply rail of 240m long is segmented by 60m each, where newly developed core structure and power cable are constructed under the road covered with asphalt of 5cm thickness. The pick-up modules which consist of core, winding wire, and rectifiers are fixed to the bottom of the bus which can carry more than 40 passengers and can pick up max. 60kW. To remove parasitic component and to transfer maximum power between them resonant circuit topology is applied to the primary and secondary sides. The EMF level is below 62.5mG at 1.75m from the center of the road to meet the regulation. Several effective ways of reducing EMF levels have been developed. In addition, effective ways to solve problems related high frequency power cables buried in ground and it's proof from soil have been studied also. This development shows that the IPS system is capable of supplying enough power to the pick-up of OLEV and can reduce battery size, weight and cost, which means the IPS with OLEV is one of the best candidate for EV.

• Journal of the Korean Geographical Society
• /
• v.51 no.2
• /
• pp.269-281
• /
• 2016

This article problematizes and interrogates the idea of 'community' which is increasingly important in Korean urban policy-making. For the purpose, this article scrutinizes, and compares, how ordinary citizen participants and civil society activist organizations in a 'community garden' program of Seoul make sense of, utilize, and practice the policy concept. The neo-Faucauldian perspective of 'governmentality' is employed to understand the association between the community-focused policy program and neoliberalism, but Barnett's( 2005) call for 'bottom-up governmentality' is taken seriously in order to avoid any deterministic interpretation. On the basis of this eclectic perspective on governmentality, this article presents empirical findings that may suggest a contestation over community between ordinary citizens and civil society activists. More specifically, ordinary citizen participants prioritize place-based, on-the-ground community experiences that are built on common cultivation practices, whereas civil society activists tend to consider community garden as a teleological governmental technology generative of particular citizen subjects. Civic community garden advocacy as such aims to address social, economic, and spatial problems that neoliberalsim has produced, but it also appears to be in a close association with neoliberal urban policy. Thus, the community activism's meaningfulness lies in its active intervention to neoliberal urban policy, but a gap between ordinary practical achievements and civic activism can be a potential danger to urban community policy. On the basis of this discussion, this article asks more detailed investigations about the taken-for-granted positivity of urban community (re)vitalization programs, and also examinations on whether and how such projects generates emergent tensions between ordinary achievements and policy prescriptions.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.249-249
• /
• 2013

Surface-enhanced Raman spectroscopy (SERS) is a sensitive approach to detect and to identify a variety of molecules. To enhance the Raman signal, optimization of the gap between nanostructures is quite important. One-dimensional materials such as nanowires, nanotubes, and nanograsses have great potential to be used in SERS due to their unique sizes and shape dependent characteristics. In this study we investigate a simple way to fabricate SERS substrates based on randomly grown copper oxide (CuO) nanowires. CuO nanograss is fabricated on pre-cleaned Cu foils. Cu oxidized in an ammonium ambient solution of 2.5 M NaOH and 0.1 M $(NH_4)_2S_2O_8$ at $4^{\circ}C$ for 10, 30, and 60 minutes. Then, Cu(OH)2 nanostructures are formed and dried at $180^{\circ}C$ for 2 h. With the drying process, the Cu(OH)2 nanostructure is transformed to CuO nanograss by dehydration reaction. CuO nanograss are grown randomly on Cu foil with the average length of 10 ${\mu}m$ and the average diameter of a 100 nm. CuO nanograsses are covered by Ag with various thicknesses from 10 to 30 nm using a thermal evaporator. Then, we immerse uncoated and Ag coated CuO nanowire samples of various oxidation times in a 0.001M methanol-based 4-mercaptopyridine (4-Mpy) in order to evaluate SERS enhancement. Raman shift and SERS enhancement are measured using a Raman spectrometer (Horiba, LabRAM ARAMIS Spectrometer) with the laser wavelength of 532 nm. Raman scattering is believed to be enhanced by the interaction between CuO nanograss and Ag island film. The gaps between Ag covered CuO nanograsses are diverse from <10 nm at the bottom to ~200 nm at the top of nanograsses. SERS signal are improved where the gaps are minimized to near 10s of nanometers. There are many spots that provide sufficiently narrow gap between the structures on randomly grown CuO nanograss surface. Then we may find optimal enhancement of Raman signal using the mapping data of average results. Fabrication of CuO nanograss based on a solution method is relatively simple and fast so this result can potentially provide a path toward cost effective fabrication of SERS substrate for sensing applications.

• Journal of Korean Neurosurgical Society
• /
• v.60 no.5
• /
• pp.498-503
• /
• 2017

Objective : The purpose of the present study was to compare inter-fragmentary compression pressures after fixation of a simulated type II odontoid fracture with the headless compression Herbert screw and a half threaded cannulated lag screw. Methods : We compared inter-fragmentary compression pressures between 40- and 45-mm long 4.5-mm Herbert screws (n=8 and n=9, respectively) and 40- and 45-mm long 4.0-mm cannulated lag screws (n=7 and n=10, respectively) after insertion into rigid polyurethane foam test blocks (Sawbones, Vashon, WA, USA). A washer load cell was placed between the two segments of test blocks to measure the compression force. Because the total length of each foam block was 42 mm, the 40-mm screws were embedded in the cancellous foam, while the 45-mm screws penetrated the denser cortical foam at the bottom. This enabled us to compare inter-fragmentary compression pressures as they are affected by the penetration of the apical dens tip by the screws. Results : The mean compression pressures of the 40- and 45-mm long cannulated lag screws were $50.48{\pm}1.20N$ and $53.88{\pm}1.02N$, respectively, which was not statistically significant (p=0.0551). The mean compression pressures of the 40-mm long Herbert screw was $52.82{\pm}2.17N$, and was not statistically significant compared with the 40-mm long cannulated lag screw (p=0.3679). However, 45-mm Herbert screw had significantly higher mean compression pressure ($60.68{\pm}2.03N$) than both the 45-mm cannulated lag screw and the 40-mm Herbert screw (p=0.0049 and p=0.0246, respectively). Conclusion : Our results showed that inter-fragmentary compression pressures of the Herbert screw were significantly increased when the screw tip penetrated the opposite dens cortical foam. This can support the generally recommended surgical technique that, in order to facilitate maximal reduction of the fracture gap using anterior odontoid screws, it is essential to penetrate the apical dens tip with the screw.

• Journal of the Korean Society of Costume
• /
• v.55 no.2 s.92
• /
• pp.18-32
• /
• 2005

The purpose of this study is to find out the origin of perpetuity in the fashion design of Soma Delaunay, who was recognized as a unique designer in the 20th century. Her characteristics of fashion design appeared as dynamism in the incline of op-art using geometric pattern designed on the basis of abstract painting, color contrast between strong original colors, and repeated geometric patterns. The modern image can be explained as modernity in modern fashion and is continued in these days. The origins of modernity analyzed as follows. First, Soma Delaunay developed textile design, considering the use of clothing on the basis of scientific idea. Furthermore, she evolved traditional textile design and making process into a practical and rational way through developing new needlework technique. Second, she tried a new style through a straight silhouette in contrast to Art Nouveau style and the test and mixture of different genres. Third, she expressed the simultaneity of Orphism through the parallel structure of various colors. In particular, she used the contrast of strong and clear original colors to express a rhythm of dynamism and give visual interest through color. Finally, Soma Delaunay attempted to approach the public using clothing, furniture, and curtains with the focus on textiles. It may represent her intention to remove a gap between art and life by understanding the public and their life. As examined above, it can be sad that Soma Delaunay's scientific idea with the flow of industrialization, an open attitude not bound by a rule as an artist, an idea of Avant-garde, the comprehension of various colors and the understanding of the public. These factors lie at the bottom of her fashion design.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.4 no.1
• /
• pp.34-44
• /
• 1992

A numerical model using Hybrid Element Method(HEM) is presented for the prediction of wave agitations in a harbor which are induced by the intrusion and transformation of incident short-period waves. A linear mild-slope equation including bottom friction is used as the governing equation and a partial absorbing boundary condition is used on solid boundaries. Functional derived in the present paper is based on the Chen and Mei(1974)'s concept which uses finite element net in the inner region and analytical solution of Helmholtz equation in the outer region. Final simultaneous equations are solved using the Gaussian Elimination Method. The model appears to be reasonably good from the comparison of numerical calculation with hydraulic experimental results of short-wave diffraction through a breakwater gap(Pos and Kilner, 1987). The problem of requring large computational memory could be overcome using 8-noded isoparametric elements.