• 한국해양공학회지
• /
• 제23권3호
• /
• pp.20-29
• /
• 2009

This study investigated the shear strength characteristics of waste tire powder-added lightweight soil (WTLS), which were developed to recycle dredged soil, bottom ash, and waste tires. The WTLS used in this experiment consisted of dredged soil, bottom ash, waste tire powder, and cement. Test specimens were prepared with various contents of waste tire powder ranging from 0% to 100% at 25% intervals and bottom ash contents of 0% or 100% by the weight of the dry dredged soil. In this study several series of direct shear tests were carried out, which indicated that the shear properties of WTLS were strongly influenced by the mixing conditions, such as the waste tire powder content and bottom ash content. The unit weight, as well as the shear strength of the WTLS, decreased with an increase in waste tire powder content. The shear strength of WTLS with bottom ash was 1.34 times greater than that of WTLS without bottom ash. An average increase in cohesion of 30 kPa was obtained in WTLS with the inclusion of bottom ash due to the bond strength induced from the pozzolanic reaction of the bottom ash. In this test, the maximum value of the internal friction angle was obtained with a 25% content of waste tire powder.

• 한국농공학회논문집
• /
• 제56권1호
• /
• pp.21-30
• /
• 2014

The objective of this study is to find the electrical properties of Bottom ash from thermoelectric power plants in Korea. By using Parallel Plate Method, the electrical resistivity and dielectric constant were measured at the frequency from 20 Hz to 10 MHz. Also, unconfined strength test, XRF and sieve analysis were performed for finding the relationship between strength, physiochemical properties and electrical properties. In the result, the change of electrical resistivity and dielectric constant of bottom ash against frequency was similar to that of general soil. The proportion of fine grain in bottom ash had the positive correlation with dielectric constant and negative correlation with electrical resistivity. Chloride and sulfur trioxide were proportional to dielectric constant and the more bottom ash had chloride content, the lower electrical resistivity appeared in bottom ash. Unconfined strength of bottom ashes had a range from 200 kPa to 780 kPa and strength was inverse proportional to electrical resistivity.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.444-449
• /
• 2004

The design modification of bottom guide structures of the instrumented capsule, which is used for the irradiation test in the HANARO reactor, was required because of the trouble of the bottom guide arm's pin during irradiation. The previous structure with 3-pin arms was changed into the cone shape of one body. The specimens of the bottom end cap ring with three different sizes (${\Phi}68/70/72mm$) were designed and manufactured. The out-pile tests for the capsule with previous and new three bottom guide structures were performed in the one-channel flow test facilities. In order to evaluate the compatibility with HANARO and the structural integrity of the capsule, a loading/unloading, a pressure drop, a thermal performance, a vibration, and an endurance test were conducted. From out-pile test results, the capsule with the cone shape bottom guide structures was found to be more stable than the previous structure and the optimized size of the bottom guide structure selected was 70mm in diameter. It is expected that the new bottom guide structures will be applicable to all material and special capsules which will be designed and manufactured for the irradiation tests in the future.

• 대한조선학회지
• /
• 제8권1호
• /
• pp.1-16
• /
• 1971

Ship hulls obtained by the streamline tracing method usually have characteristically drooped keel lines at the bottom, and a flattening of these bottoms would contribute considerably in utilizing these analytically obtainable hull forms in practical usage. In this dissertation, the author deals with a study on the determination of a practical hull form by the streamline tracing method with a particular emphasis on the bottom flattening problem. Investigations are centered around the form and the terms of bottom doublet distribution. Several examples are computed by varying bottom doublet sheet systematically while the main side source distribution is kept the same. The following conclusions are obtained based on those computed results: after the strength of a bottom doublet sheet can be determined more easily and efficiently by employing the concept of a control plane. If the distance from the distributed plane of the bottom doublet sheet to the control plane is defined as the control distance, the strength of the bottom doublet sheet, the flatness of traced lines, and the increment of the beam length ratio by adding the bottom doublet sheet are all related to the control distance by linear equations near the design bottom. It is observed that a better result can be obtained by using a "line-sampling method" for ${\zeta}_K>2T/L$, and a "plane-sampling method" for ${\zeta}_K{\leq}2T/L$, provided that the check points are sampled in the range ${\xi}{\leq}0.7$.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 추계학술발표강연 및 논문개요집
• /
• pp.212-212
• /
• 2003

Many of the spin valve multilayer structures with FeMn as antiferromagnetic layer consist of a NiFe/FeMn/NiFe trilayer where the bottom NiFe layer is the seed layer to facilitate the growth of (111) gama-FeMn antiferromagnetic phase and the top NiFe layer forms the pinned layer[1], In this study, exchange bias of bottom NiFe layer has been investigated as functions of thicknesses of top and bottom NiFe in NiFe/FeMn/NiFe, prepared by rf magnetron sputtering, MH-loop was measured by vibration sample magnetometer (VSM). Two hysteresis loops are corresponded to bottom and top layers, similar to reported loops in spin valve structure. Exchange bias of bottom NiFe could be induced by the interfacial coupling between bottom NiFe and FeMn. But those coupling are strongly dependent on the top and bottom NiFe thicknesses, revealing anomalous character ul exchange bias of bottom NiFe layer.

• 한국지반공학회논문집
• /
• 제22권11호
• /
• pp.5-11
• /
• 2006

본 연구는 산업폐기물인 Bottom Ash의 재활용을 위한 목적으로 보통포틀랜드 시멘트와 Bottom Ash의 적정 혼합비를 산정 한 후 황토, 풍화토, Bentonite를 일정량 혼합하여 강도와 내구성에 대해 평가했고, 중금속 용출시험을 통해 환경적 영향을 검토했다. 그 결과 시멘트:Bottom Ash의 적정혼합비는 6:4이고, 황토, 풍화토, Bentonite는 6% 혼합하였을 경우 강도와 내구성에 가장 효과적 이였다. 또한 중금속 용출시험결과 지정 폐기물 기준에 훨씬 못 미치는 것으로 나타났다.

• 한국지반공학회논문집
• /
• 제27권6호
• /
• pp.63-79
• /
• 2011

본 연구에서는 Bottom Ash와 표준사의 상대밀도시험을 실시하여 시험결과를 토대로 40%, 55%, 70%의 상대밀도로 반복삼축시험을 실시하였다. 또한, 55%의 상대밀도로 세립분 함유량에 따른 반복삼축시험을 실시하였다. 시료는 No.40체, No.60체, No.100체, No.200체 잔류시료로 분류를 하여 현장에서 시료의 다짐을 실시한 경우 발생될 수 있는 시료의 파쇄를 고려하여 Bottom Ash를 A다짐 몰드를 이용한 파쇄시험을 실시하였다. 각 체의 잔류시료의 파쇄특성을 고려하면 A다짐에 따른 파쇄율은 약 30%까지 증가하게 되어 세립분 함유량을 10%, 20%, 30%로 조정하여 상대밀도 시험을 실시하였다. 상대밀도에 따른 반복삼축시험을 통해 Bottom Ash의 액상화 저항특성을 분석하였다. 시험결과 Bottom Ash의 경우 파쇄강도가 표준사에 비해 작아 축차응력에 크기에 따라 기존 포화사질토와 상이한 액상화 거동특성을 보였으며, 시료의 세립분의 함유량에 따라 액상화 저항특성이 최대인 세립분 함유량을 찾을 수 있었다.

• Structural Engineering and Mechanics
• /
• 제64권2호
• /
• pp.233-241
• /
• 2017

Earlier numerous studies have been done on implementation of Tuned Liquid Damper (TLD) for structural vibration control by many researchers. As per current review there is no significant study on a sloped bottom TLD. TLD's are passive devices. A TLD is a tank rigidly attached to the structure and filled partially by liquid. When fundamental linear sloshing frequency is tuned to structure's natural frequency large sloshing amplitude is expected. In this study set of experiments are conducted on flat bottom and sloped bottom TLD at beach slope $20^{\circ}$, $30^{\circ}$ and $45^{\circ}$, for different types of structures, mass ratio, and depth ratio to investigate the overall effectiveness of TLD and specific effect of TLD parameters on structural response. This experimental study shows that a properly designed TLD reduces structural response. It is also observed that effectiveness of TLD increases with increase in mass ratio. In this experimental study an effectiveness of sloped bottom TLD with beach slope $30^{\circ}$ is investigated and compared with that of flat bottom TLD in reducing the structural response. It is observed from this study that efficiency of sloped bottom TLD in reducing the response of structure is more as compared to that of flat bottom TLD. It is shown that there is good agreement between numerical simulation of flat bottom and sloped bottom TLD and its experimental results. Also an attempt has been made to investigate the effectiveness of sloped bottom TLD with beach slope $20^{\circ}$ and $45^{\circ}$.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.669-672
• /
• 2008

바텀애시는 미연소탄소 함량이 높고 활성도가 낮아 활용에 있어 어려움이 있다. 이에 본 실험에서는 바텀애시의 활용도를 높이고자 미연소탄소분을 제어함으로써 바텀애시의 성능을 높이고자 하였다. 분급을 통하여 바텀애시의 강열감량은 4.5%로 조절하였다. OPC에 바텀애시를 10%, 20%, 30%로 혼입할 경우 혼입율의 증가에 따라 강도는 감소하는 것으로 나타났다. 그러나 미연탄소분을 제어한 바텀애시 배합의 경우 원시료상태의 바텀애시보다 6%가량 증진되는 효과를 나타내었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.19-24
• /
• 2003

Recently, the by-product of coal ash has been increased by increase of consumption of electric power. So in view of environmental aspect, it is important to secure a reclaimed land and treatment utility for coal ash. This is an experimental study to compare and analyze the properties of high volume coal-ash concrete using the bottom ash. For this purpose, the mix proportions of concrete according to the replacement ratio of bottom ash(l0, 20, 35, 50%). And then air content, slump, compressive strength, durability test were performed. According to test results, it was found that the compressive strength of bottom ash concrete was similar to that of plain concrete(BA0). And the carbonation depth of bottom ash concrete increased as the replacement ratio of bottom ash.