• Composites Research
• /
• 제20권4호
• /
• pp.31-41
• /
• 2007

시스템 요구 조건에 따른 다양한 돔 형상 설계를 위하여 외부 하중이 고려된 돔 형상 설계 식이 제시되었고, 동일 원통부와 보스 오프닝을 가지면서 다른 돔 형상을 갖는 압력 용기의 성능(파열압력*내부용적/복합재무게) 변화를 유한요소해석을 통하여 평가하였다. 해석 결과는 돔 형상이 낮아질수록 파열 압력이 저하되어 압력 용기 성능이 저하됨을 나타내었다. 특히 원통부 반경과 보스 오프닝간의 비를 나타내는 보스 오프닝 크기 비율(${\rho}\;o$)이 큰 경우는 돔 형상이 낮아짐에 따라 복합재 무게 증가율이 크게 나타남으로서 압력 용기 성능 저하의 원인이 되었고, 파열 압력 상승을 위하여 돔 부위에 추가적인 보강설계가 요구되었다. 예를 들어 ${\rho}\;o=0.35$ 이하의 돔인 경우, 돔 형상 변화가 크지 않음으로서 돔 형상 변화에 따른 압력 용기 성능 변화도 크지 않은 것으로 나타난 반면, ${\rho}\;o=0.54$ 이상의 압력 용기인 경우 낮은 돔으로 변화됨에 따라 파열 압력 감소와 복합재 무게 증가로 압력 용기 성능 저하가 비교적 크게 나타나서 압력 용기 내부 용적 증가나 스커트와 돔간의 공간 확보가 우선인 설계 조건을 제외하고는 낮은 돔 형상 설계가 바람직하지 않은 것으로 나타났다.

• 천문학회보
• /
• 제40권1호
• /
• pp.43.3-44
• /
• 2015

We analyze the clustering of large scale structure in the Universe in a model independent method, accounting for anisotropic effects along and transverse to the line of sight. A large sample of 690,000 galaxies from The Baryon Oscillation Spectroscopy Survey Data Release 11 are used to determine the Hubble expansion H, angular distance D_A, and growth rate GT at an effective redshift of z=0.57. After careful bias and convergence studies of the effects from small scale clustering, we find that cutting transverse separations below 40 Mpc/h delivers robust results while smaller scale data leads to a bias due to unmodelled nonlinear and velocity effects. The converged results are in agreement with concordance LCDM cosmology, general relativity, and minimal neutrino mass, all within the $68{\backslash}%$ confidence level. We also present results separately for the northern and southern hemisphere sky, finding a slight tension in the growth rate -- potentially a signature of anisotropic stress, or just covariance with small scale velocities -- but within $68{\backslash}%$ CL.

• 천문학회보
• /
• 제40권1호
• /
• pp.44.1-44.1
• /
• 2015

We present joint constraints on the number of effective neutrino species $N_{eff}$ and the sum of neutrino masses ${\Sigma}m_{\nu}$, based on a technique which exploits the full information contained in the one-dimensional Lyman-${\alpha}$ forest flux power spectrum, complemented by additional cosmological probes. In particular, we obtain $N_{eff}=2.91{\pm}0.22$ (95% CL) and ${\Sigma}m_{\nu}$ < 0.15 eV (95% CL) when we combine BOSS Lyman-${\alpha}$ forest data with CMB (Planck+ACT+SPT+WMAP polarization) measurements, and $N_{eff}=2.88{\pm}0.20$ (95% CL) and ${Sigma}m_{\nu}$ < 0.14 eV (95% CL) when we further add baryon acoustic oscillations. Our results tend to favor the normal hierarchy scenario for the masses of the active neutrino species, provide strong evidence for the Cosmic Neutrino Background from $N_{eff}{\approx}3$($N_{eff}=0$ is rejected at more than $14{\sigma}$), and rule out the possibility of a sterile neutrino thermalized with active neutrinos (i.e., $N_{eff}=4$) - or more generally any decoupled relativistic relic with $${\Delta}N_{eff}{\sim_=}1$$ - at a significance of over $5{\sigma}$, the strongest bound to date, implying that there is no need for exotic neutrino physics in the concordance ${\Lambda}CDM$ model.

• 한국생산제조학회지
• /
• 제22권5호
• /
• pp.859-864
• /
• 2013

Creation of a stress relief groove is a fairly simple yet high-performance method. During the application of this method, it is important to consider the location and size of the groove in order to achieve better performance. Consequently, this research proposes an approach for optimizing the application of the stress relief groove method to a press-fitted assembly. In a boss design, the position and diameter of the groove are configured as design variables and the design of experiments is applied. Based on this information, a 3D model is built and analyzed using the finite element analysis software ABAQUS. Meta-models are created using back-propagation neural networks. Then, deterministic optimization results obtained from a genetic algorithm are compared with the results of the finite element analysis. The temperature sensitivity of the optimized model is analyzed, and finally, reliability-based design optimization is conducted for enhancing the design quality.

• 대한안전경영과학회지
• /
• 제15권4호
• /
• pp.383-392
• /
• 2013

In order to promote social responsibility, a company reads to engage in various activities to increase their competitiveness to ensure stable and continuous development. One of the activities is to input human/material resources in order to draw and develop the core abilities of member for the productivity improvement of the company. This study is concerned with capability improvement of members in relation to core company performance, the focus of the study is to identify how education training in a company may contribute to team performance by leaning transfer through empirical study. As a result of this study, it was found that the personality of members, as well as the training programs, within the company can be a significant factor for improving productivity and performance of the company. In addition, team members noted that learning transfer take place when effectively lead through the leadership of a boss and identified that this leadership ultimately has a significant effect on team performance.

• 한국조리학회지
• /
• 제24권3호
• /
• pp.177-187
• /
• 2018

This study began with the expectation that work spirituality according to self - sacrificing leadership of a company recognized by hotel employees could positively affect superior liking and innovation behavior. The results of this study can be summarized as follows; the exercise of authority and the self - sacrifice in reward distribution are very important in the social exchange relationship. And the experience of joy and meaning, which is a behavior that meets the values, showed that it fulfilled the sense of accomplishment that the employees realized as a value, and it increased the satisfaction of pursuing the value of the boss and participating in and contributing to the world. Moreover, the hotel employees were likely to favor the bosses when they gave up or refrained from their authority or delegated to their subordinates, or when their bosses delayed or gave up rewards that had to be distributed to them. Also, self-sacrifice on the supervisor's job assignment is considered as an essential part of inducing the innovative behavior of the subordinates, regarded as desirable behavior or qualities.

• 한국생산제조학회지
• /
• 제19권1호
• /
• pp.134-139
• /
• 2010

In this study, we developed the gear type vane damper replacing the link type through gear design using Finite Element Analysis(FEA). FEA about the pinion and the vane shaft in the boss of gear type damper for quality improvement was accomplished. We analyzed fluid flow according to angular displacement. Catched the problem of the torque and backlash bring to the pinion as structure improvement of the forced draft fan(FD FAN). Finally, we compared the gear driving result with simulation. It is the objective of the present study to identify a nonlinear flow rate control of gear type vane damper and to suggest a damper shape with a linear flow rate control. This study is related to the development of gear type vane damper change link type in forced draft fan.

• 천문학회보
• /
• 제38권2호
• /
• pp.58.2-58.2
• /
• 2013

Both peculiar velocities and errors in the assumed redshift-distance relation ("Alcock-Paczynski effect") generate correlations between clustering amplitude and orientation with respect to the line-of-sight. In this talk we propose a novel technique to extract the Alcock-Paczynski, geometric, distortion information from the anisotropic clustering of galaxies in 3-dimensional redshift space while minimizing non-linear clustering and peculiar velocity effects. We capitalize on the recent, large dataset from the Sloan Digital Sky Survey III (SDSS-III), which provides a large comoving sample of the universe out to high redshift. We focus our analysis on the Baryon Oscillation Spectroscopic Survey (BOSS) constant mass (CMASS) sample of 549,005 bright galaxies in the redshift range 0.43

• 한국기계가공학회지
• /
• 제19권9호
• /
• pp.15-23
• /
• 2020

Spline is a machine component using transmits rotating energy with grooves on internal of boss and external periphery of shaft. Internal spline is generally produced by machining process. However, to reduce manufacturing cost and save time, plastic deformation process such as backward extrusion is gradually adapted for spline production. In plastic deformation process, forming load, stress on tools and flow flaws should be taken into account to have sound products. For this purpose, kinematically admissible velocity fields for Upper Bound Method in backward extrusion of internal spline has been suggested, then forming load and relative pressure have been calculated. Internal spline forming experiments have been con-ucted under hydraulic press and the calculated forming load well predicts the load of experiment.

• 대한기계학회논문집A
• /
• 제26권6호
• /
• pp.1149-1158
• /
• 2002

An improved hydrostatic unit(HSU) model is proposed by considering the flow loss in order to analyze the power flow characteristics of a hydromechanical transmission(HMT) and a network analysis algorithm is presented to determine the torque and speed of each element of the HMT. To calculate the torque and flow loss of a pump and a motor in HSU, an effort and flow concept is introduced, which can be used to establish a torque and speed matrix in the network analysis. It is found from the network analysis that magnitude of the HSU stroke increases to maintain the same output speed in order to compensate the flow Boss in the HSU and the efficiency of the HMT shows the lowest value in the 1st speed since the HSU has the largest flow loss in the 1st speed and the flow loss decreases as the speed ratio upshifts.