• Bulletin of the Korean Chemical Society
• /
• 제5권6호
• /
• pp.240-244
• /
• 1984

8-Oxyquinoline dihydroboronite is prepared by mixing equimolar amounts of 8-hydroxyquinoline and borane-dimethyl sulfide complex in tetrahydrofuran at room temperature and its structure is determined by spectroscopic methods. The reagent is shown to be an extremely mild reducing agent and reduces aldehydes, cyclohexanones, and acid chlorides to some extent. The reagent in the presence of 0.1 equiv of boron trifluoride etherate in tetrahydrofuran at room temperature reduces selectively aldehydes in the presence of ketones, while the reagent in the presence of 1 equiv of boron trifluoride etherate rapidly reduces simple aldehydes and ketones but does not reduce carboxylic acids, esters, and amides.

• 콘크리트학회논문집
• /
• 제28권2호
• /
• pp.197-204
• /
• 2016

본 논문에서는 타 재료에 비해 수소 원소 함유량이 높아 고속 중성자 차폐에 유리한 합성 고분자 화합물과 중성자 포획단면적이 큰 붕소화합물을 각각 혼입한 모르타르를 대상으로 중성자 차폐성능을 분석하였다. 합성 고분자 화합물의 종류, 형상, 크기, 함량 및 붕소화합물의 함량에 따라 총 16개 모르타르 배합을 설계하였으며, 각 배합의 슬럼프 플로우, 28일 압축 및 인장강도를 측정하고, 고속 중성자 및 열중성자에 대한 차폐실험을 수행하였다. 합성 고분자 화합물의 선량 투과율은 모르타르 대비 최대 38.5%까지 감소하였으며, 공기 중 선량의 26.3%까지 차폐하였다. 붕소화합물을 혼입한 모르타르의 열중성자 차폐율은 최대 90.3%로 대부분의 열중성자를 차폐하였다. 비록 화합물 혼입에 의해 모르타르의 기본 특성은 저하되었으나, 표면 개질, 특수 혼화제 첨가 등 지속적인 연구를 통하여 성능 저하를 최소화할 수 있을 것으로 판단되며, 중성자 투과성능 역시 다양한 타입의 시험체 조합을 통한 레이어 시스템 도입 등으로 다양한 투과성능에 따른 맞춤형 설계를 제공할 수 있을 것이다.

• Journal of the Korean Wood Science and Technology
• /
• 제48권4호
• /
• pp.513-526
• /
• 2020

The existing preservation methods are difficult to be applied to a large dimension log which is needed for making traditional wooden ship 'Jalur' in Riau Province. Novel techniques to provide the use of readily available species to replace traditional species alternative were investigated. These included infusion and a combination of injection and bandage-wrapping methods for preserving living trees of Balam (Macaranga conifera (Rchb.f. & Zoll.) Müll.Arg.) and Bintangor (Calophyllum soulattri Burm.f.). Water-based boron compounds were applied as wood preservatives. In total, 18 discs from the bottom, middle, and top of four trees and two controls were used. Trees undergoing treatment were also used to see how wood anatomical structure might affect the boron penetration. The overall aim was to identify the best method for use in Jalur manufacturing. The results showed that in infused Balam tree where the hose position for the preservative intake was deep (10-15 cm from the bark), no boron compound was observed in the outer sapwood. Combination of injection and bandage-wrapping method gave higher percentage of boron penetration at bottom and middle of Balam tree. However, infused Bintangor showed 100% boron penetration. The larger vessel diameter, the absence of tyloses, and the simple perforation plates in Bintangor wood were likely to have contributed to the higher penetration of boron. The combination of bandage-wrapping and infusion, or alternatively by infusing the living trees close to the bark, and at as low as position in the stem gives better protection when treatments are applied to living trees.

• 미생물학회지
• /
• 제6권1호
• /
• pp.22-28
• /
• 1968

Chlorella ellipsoidea cells were cultured in an iron, copper, zinc, manganese, molybdenum or boron-free medium. Biosynthetic activities of nucleic acids, protein and phospholipid in chlorella cells, which were growing in a microelement deficient medium were compared with those of the normal cells by measuring the contents of phosphate, amino acids or UV-absorbing substances in the various cell fractions. When the algae were grown in a molybdenum-free medium, the amounts of phosphate in the acid-soluble fraction of the cells increased, whereas the amounts of alkali-stable protein and RNA decreased compared with the normal cells showing that the synthesis of protein and RNA from the early products of photosynthesis was inhibited. When the algae were grown in a boron-free medium, amounts of alkali-labile protein and phospholipid of the cells decreased, while the amount of phosphate in acid-soluble fraction increased compared with the normal cells showing that the biosynthesis of protein and phospholipid from the early products of photosynthesis was retarded. In general, amounts of protein and RNA in the microelement deficient cells significantly decreased compared with those of the normal cells. Phosphate content in the acid-soluble fraction of the algal cell grown in an zinc, copper, molybdenum, or boron-free medium increased considerably, whereas that of the algal cell grown in an iron or manganese-free medium decreased remarkably compared with that of the control. It is considered, therefore, that molybdenum, zinc, copper and boron etc. play an important role in the biosyntbesis of macromolecule from acid-soluble phosphate compounds, in contrast to the principal action of iron and manganese on the photosynthetic process itself.

• Korean Chemical Engineering Research
• /
• 제53권6호
• /
• pp.808-813
• /
• 2015

해수 중에 보론은 주로 붕산(boric acid, $B(OH)_3$)으로 존재하며 그 크기가 역삼투압(RO, reverse osmosis) 공정의 막의 공칭공경(nominal pore size)만큼 작아 이를 제거하기가 쉽지 않다. 이에 본 연구에서는 수용액 중 보론 화합물의 크기를 역삼투압 공정에서 제거가 용이하도록 키우기 위한 방법으로 $B(OH)_3$가 폴리올과 착화합물을 형성하는 원리를 이용하고자하며 착화합물의 형성 여부를 라만 분광학 연구를 통해 확인하고자 하였다. 먼저 $B(OH)_3$와 붕산염(borate ion, ${B(OH)_4}^-$) 이온의 대칭(symmetric) B-O 신축운동 모드(stretching vibrational mode)의 진동수를 확인하기 위하여 pH를 증가시키며 라만 스펙트럼을 측정한 결과 $877cm^{-1}$에서 $730cm^{-1}$으로 피크의 이동이 관찰되었다. 이는 수용액 중의 $B(OH)_3$가 pH가 증가하면서 ${B(OH)_4}^-$로 전환됨을 나타내고 이러한 피크의 이동은 진동수 계산(frequency calculation)에 의한 예측과 정확하게 일치하였다. 반면 $B(OH)_3$ 수용액에 폴리올을 첨가한 경우 pH가 증가하여도 ${B(OH)_4}^-$의 특성 진동수인 $730cm^{-1}$가 나타나지 않았으며 이는 $B(OH)_3$가 ${B(OH)_4}^-$로 전환되는 것이 아니라 폴리올과 착화합물을 형성함을 간접적으로 보여주고 있다.

• Bulletin of the Korean Chemical Society
• /
• 제33권9호
• /
• pp.3136-3138
• /
• 2012

• 통합자연과학논문집
• /
• 제10권3호
• /
• pp.171-174
• /
• 2017

Non-hydrolyzable fluorinated organosilicon compounds as an eletrolyte for the application of lithium-ion batteries (LIB) are synthesized. New synthetic method for the perfluorinated organosilicon compound containing spacer such as ethyl and propyl group with cyano moiety instead of ethylene glycol to prevent hydrolysis and to promote conductivity are developed in one pot reaction with moderately high yield. Air-sensitive boron trifluoride etherate is no longer required in this reaction. The products are characterized by spectroscopic analysis.

• Bulletin of the Korean Chemical Society
• /
• 제7권5호
• /
• pp.372-376
• /
• 1986

Substituted 3,4-dihydro-2H-pyrans ($1_{a-e}$) were prepared by (4 + 2) cycloaddition reaction of dimethyl dicyanofumarate with the corresponding electron-rich olefins. The compounds $1_{a-e}$ were ring-open polymerized by cationic initiators to obtain polymers of 1:1 alternating sequence. Polymerizations were carried out with boron trifluoride etherate in methylene chloride at $-78^{\circ}C$. All the polymers obtained were soluble in common solvents and were reprecipitated by pouring its chloroform solution into diethyl ether. All the compounds $1_{a-e}$ were not as reactive as the corresponding pyrans derived from ${\alpha}$ -cyanoacrylate.

• 대한방사성의약품학회지
• /
• 제8권1호
• /
• pp.39-44
• /
• 2022

The development of methods for the inert and stable radiohalogenation of targeted radiopharmaceuticals is a prerequisite for real-time diagnosis and therapy using radiohalogenated radiopharmaceuticals. Radiohalogenated carboranes demonstrate superior stability in vivo and versatile applications compared with directly labeled tyrosine analogues or synthetically modified organic compounds. Herein, we focus on the most common approaches for the radioiodination (¹²³l, ¹²⁴l, ¹²⁵l, and ¹³¹l) of carborane derivatives.

• 한국재료학회지
• /
• 제23권2호
• /
• pp.104-111
• /
• 2013

In this study, GaN powders were synthesized from gallium oxide-hydroxide (GaOOH) through an ammonification process in an $NH_3$ flow with the variation of $B_2O_3$ additives within a temperature range of $300-1050^{\circ}C$. The additive effect of $B_2O_3$ on the hexagonal phase GaN powder synthesis route was examined by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and Fourier transformation infrared transmission (FTIR) spectroscopy. With increasing the mol% of $B_2O_3$ additive in the GaOOH precursor powder, the transition temperature and the activation energy for GaN powder formation increased while the GaN synthesis limit-time ($t_c$) shortened. The XPS results showed that Boron compounds of $B_2O_3$ and BN coexisted in the synthesized GaN powders. From the FTIR spectra, we were able to confirm that the GaN powder consisted of an amorphous or cubic phase $B_2O_3$ due to bond formation between B and O and the amorphous phase BN due to B-N bonds. The GaN powder synthesized from GaOOH and $B_2O_3$ mixed powder by an ammonification route through ${\beta}-Ga_2O_3$ intermediate state. During the ammonification process, boron compounds of $B_2O_3$ and BN coated ${\beta}-Ga_2O_3$ and GaN particles limited further nitridation processes.