• International Commerce and Information Review
• /
• v.15 no.4
• /
• pp.267-286
• /
• 2013

The WCO Time Release Study (TRS) is a unique tool and method for measuring the actual performance of Customs activities. The ultimate aim of TRS is to improve the performance of the function being measured. To be more specific, TRS is used for identifying bottlenecks in the international supply chain and/or constraints affecting Customs release, assessing newly introduced and modified techniques, procedures, technologies and infrastructure, or administrative changes, establishing baseline trade facilitation performance measurement, identifying opportunities for trade facilitation improvements and estimating the country's approximate comparative position as a benchmark tool. The effective utilization methods of TRS for trade facilitation in Korea Customs Services are as follows ; Firstly, it is necessary to make every efforts to identify bottlenecks in border-related procedures and improve their procedures for continuous and more improved trade facilitation. Secondly, it is necessary to optimize and simplify export-related procedures using the TRS in exportation for efficiency of total international supply chain. Thirdly, it is necessary to make coordinated border management with main trading partners. Lastly, it is necessary to enhance Korea's international status to support underdeveloped countries in the field of trade procedures.

• The Korean Journal of Malacology
• /
• v.27 no.3
• /
• pp.181-190
• /
• 2011

This study was investigated to find out the change of reproductive and histological biomarkers of Ruditapes philippinarum exposed to nonylphenol (NP). Experimental period was 16 weeks. Experimental groups were composed of one control condition and three NP exposure conditions (0.05, 0.1, $0.2 mg\;NP\;L^{-1}$). Gonad index was higher in exposure group than control in female and higher in control than exposure group in male. Intersexuality in the NP exposure group was 14.56% with male exhibiting higher ratio than female. Histological analysis of organ system illustrated expansion of hemolymph sinus, loss of striated border of inner epidermis and degeneration of mucous cell in the mantle. In the gill partially disappearance of frontal and lateral cilia, degeneration of mucous cell were observed. Also, hyperplasia of epithelium and disappearance of striated border were observed in the foot. As the concentration of NP increased, the accumulation of lipofuscin increased in the digestive gland. The results of this study suggest that NP induces reduction of survival rate, histopathology and intersex of R. philippinarum. Furthermore, it is indentified that NP functions as an estrogenic effector on the reproduction of R. philippinarum.

• Journal of Biosystems Engineering
• /
• v.39 no.2
• /
• pp.87-95
• /
• 2014

Purpose: The purpose of this study was to design a variable frequency LED light system for plant factory which combined red, blue, green, white, and UV lights and controlled the ratio of the light wavelength. In addition, this study evaluated the performance of each combination of LED to verify the applicability. Methods: Four combinations of LED (i.e. Red+Blue, Red+Blue+Green, Red+Blue+White, Red+Blue+UV) were designed using five types of LED. The system was designed to control the duty ratio of each wavelength of LED by 1% interval from 0~100%, the pulse by 1Hz interval from 1~20kHz. Response characteristics of the control system, spectral distribution of each combination, light uniformity and uniformity ratio were measured to test the performance of the system. Results: Clean waveforms were measured from 10Hz to 10kHz regardless of duty ratio. Frequency distortion was observed within 5% of inflection point at frequencies above 10kHz regardless of duty ratio, but it was judged negligible. Spectra showed a normal distribution, and maximum PPF with duty ratio of 100% was $271.4{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ for the Red+Blue combination. PPF of the Red+Blue+Green combination was $258.9{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, and that of the Red+Blue+White combination was $273.9{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$. PPF of the Red+Blue+UV combination was $267.7{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$. Uniformity ratio for the area excepting border showed 0.90 for the Red+Blue and Red+Blue+White combinations, 0.87 for the Red+Blue+Green combination, and 0.88 for the Red+Blue+UV combination. The light was irradiated evenly at the area excepting border, so it was suitable for plant growing. Conclusions: From the results of this study, response characteristics of the control system, spectral distribution of each combination, light uniformity and uniformity ratio were suitable for applying into the plant factory.

• International Journal of Control, Automation, and Systems
• /
• v.6 no.3
• /
• pp.453-459
• /
• 2008

The neural network is currently being used throughout numerous control system fields. However, it is not easy to obtain an input-output pattern when the neural network is used for the system of a single feedback controller and it is difficult to obtain satisfactory performance with when the load changes rapidly or disturbance is applied. To resolve these problems, this paper proposes a new mode to implement a neural network controller by installing a real object for control and an algorithm for this, which can replace the existing method of implementing a neural network controller by utilizing activation function at the output node. The real plant object for controlling of this mode implements a simple neural network controller replacing the activation function and provides the error back propagation path to calculate the error at the output node. As the controller is designed using a simple structure neural network, the input-output pattern problem is solved naturally and real-time learning becomes possible through the general error back propagation algorithm. The new algorithm applied neural network controller gives excellent performance for initial and tracking response and shows a robust performance for rapid load change and disturbance, in which the permissible error surpasses the range border. The effect of the proposed control algorithm was verified in a test that controlled the speed of a motor equipped with a high speed computing capable DSP on which the proposed algorithm was loaded.

• Journal of Oral Medicine and Pain
• /
• v.12 no.1
• /
• pp.85-93
• /
• 1987

The author studied on the effect of TMJ sounds to the patterns and ranges of mandibular border movements in horizontal plane with Pantograph (Denar Corp.). For study, 19 patients with TMJ sounds only and 16 students with no TM disorder were selected and classified as experimental group and control group, respectively. The subject performed right lateral movement, left lateral movement, and forward movement. Each movement were performed 3 times and the movement trajectory obtained with mechanical pantograph were observed for accordance of centric relation position, reproducibility and/or restriction of lateral movement paths, deviation of protrusive path in anterior table, restriction of protrusive condylar movement path in posterior horizontal table, presence of Fisher angle in posterior vertical table. And pantographic reproducibility Index (PRI) were obtained with pantronic by the same movement method as in the mechanical pantograph record. The obtained results were as follows : 1. In experimental group, PRI scores in those who show accordance of centric relation position were 14.4, and were 26.53 in those who did not show accordance of centric relation position. However, the PRI scores of the two subgroups show no statistically significant difference in control group. Therefore, in experimental group, the capability of accordance of centric relation position affected largely the PRI scores than in control group. 2. Deviation of protrusive path was opposite to the affected side in experimental group, and was left side in control group. 3. Restriction side of condylar movement in protrusion was ipsilateral to the deviation side in experimental group, but in control group, restriction side was not related to the deviation side. 4. PRI scores in experimental group were 23.2 (moderate dysfunction category), and in control group, were 17.8 (slight dysfunction category). The PRI scores in control group, however, implies that the evaluation of temporomandibular disorders by the PRI scores only may be unreasonable.

• Journal of Oral Medicine and Pain
• /
• v.19 no.1
• /
• pp.33-43
• /
• 1994

The purpose of this paper was to observe the influence of Ga-As semiconductor-low power generating laser on she appearance and actions of tenascin, extracellular matrix, as healing process of intentional wound on the experimental animals is taking place. 35 rabbits were divided into control and experimental group. ; and on each, 3mm-long and 2mm-deep, surgical wounds were created on buccal oral mucosa and thoracodorsal portion of skin. Ga-As laser was applied to the experimental group starting a day of the day the wounds were created , the laser was applied for 5 minutes every other day. Tissue samples were taken after the 2, 4, 7, 10, and 14 days after wound formation. Then tile healing process of experimental and control groups were observed and compared, using light microscope. Afterwards, the samples were immunohistochemical stained and again observed tenascin by quantitative measuring. The following results were obtained : 1. Tenascin was observed prevalently on epithelial cells, border area of dermis, and interstitial matrix between connective tissue layers in both experimental and control groups. 2. In oral mucosa, the experimental group showed significant increase in the appearance of tenascin after 4 days compared to the control group, but after 10 days, it decreased to a point which is even less than the control group. 3. In the skin samples, the pattern of appearance of tenascin was the same in both groups, but there was some difference concerning when the peak period was shown, In the experimental group, the peak period of tenascin expression was the 7 days after wound formation in epithelium and connective tissue. In the control group, the peak period was 10 days after. 4. In both the experimental and control groups, tenascin first appeared in the epithelium near the wound area and submucosa, and then spread on the underlying connective tissue. In conclusion, appearance of tenascin is closely related to regeneration of epithelium and development of granulation tissue : therefore, low power laser, which fastnes appearance of tenascin, is sure to faciltate healing process of oral mucosa.

• Archives of Plastic Surgery
• /
• v.37 no.4
• /
• pp.329-334
• /
• 2010

Purpose: Adhesion after flexor tendon injury is a result of fibrosis between tendon and tendon sheath. This, finally interfere with gliding mechanism of tendon and results in functional problem of hands. Therefore, there have been many trials to reduce adhesion around the tendon. However, there is no standard procedure clinically practiced in hospitals. Mitomycin-C is an antineoplastic alkylating agent that decrease fibroblast proliferation and scar formation. It is commonly used in many surgery to reduce postoperative adhesion. This study was designed to observe the effect of Mitomycin-C on preventing adhesion in injured flexor tendon. Methods: The deep flexor tendon of digit 2 and 4 in the left forepaw of 15 New Zealand White rabbits were subjected to partial tenotomy. In study group, injury site was exposed to a single 5-minute application of Mitomycin-C, and in control group was left untreated. Digit 2 and 4 in the right forepaw of each rabbit were considered as nonadhesion control group. After 2 weeks, the animals were sacrificed and digits were amputated for biomechanical test and histological study. Results: In biomechanical study to measure yield point, mean yield point of non-adhesion control was $17.43{\pm}2.33$ and $25.07{\pm}4.03$ for adhesion control, which proves increase of adhesion in adhesion control group (p<0.05) in 95% confidence. In Mitomycin-C group, mean yield point was $12.71{\pm}4.97$. Compared with adhesion control, there was decrease in adhesiveness in Mitomycin-C group (p<0.05) in 95% confidence. In histological study, the result of adhesion control revealed massive adhesions of bony structure, fibrotic tissue and tendon structure with ablation of the border. However in Mitomycin-C group, we could find increased fibrotic tissue, but adhesion is much lesser than adhesion group and borders between structures remain intact. Conclusion: This study suggests that Mitomycin-C can significantly reduce adhesion of injured flexor tendon in rabbit model.

• Journal of Korean Society on Water Environment
• /
• v.26 no.2
• /
• pp.297-302
• /
• 2010

It is very important to know mean and confidence interval of water-quality constituents such as BOD for water-quality control and management of rivers and reservoirs effectively. The mean and confidence interval of BOD at Anseong2 and Hwangguji3 sampling stations which are located at the border of local governments in Anseong Stream were estimated and analyzed in this paper using Bootstrap technique which is one of non-parametric statistics. The results of Bootstrap were compared with arithmetic mean, geometric mean, Biweight method mean as a point estimator and distribution mean came from the appropriate probability distribution of Log-normal. In Bootstrap technique 12 data set was randomly selected in each year and 1000 samples was produced to get parameter of population. Visual Basic for Applications (VBA) of Microsoft Excel was utilized in Bootstrap. It was revealed that the Bootstrap technique can be used to explain more rigorously and robustly the achievement or violation of BOD target concentration in Total Maximum Daily Load (TMDL).

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1349-1353
• /
• 2003

CEMTool is a command style design and analyzing package for scientific and technological algorithm and a matrix based computation language. In this paper, we present a compiler based approach to the implementation of the command mode generalized PDE solver in CEMTool. In contrast to the existing MATLAB PDE Toolbox, our proposed FEM package can deal with the combination of the reserved words such as "laplace" and "convect". Also, we can assign the border lines and the boundary conditions in a very easy way. With the introduction of the lexical analyzer and the parser, our FEM toolbox can handle the general boundary condition and the various PDEs represented by the combination of equations. That is why we need not classify PDE as elliptic, hyperbolic, parabolic equations. Consequently, with our new FEM toolbox, we can overcome some disadvantages of the existing MATLAB PDE Toolbox.

• The Korean Journal of Financial Management
• /
• v.11 no.2
• /
• pp.195-221
• /
• 1994

This study investigates the wealth effect of foreign acquisition of U.S. based firms. Contrary to previous studies, this analysis demonstrates that after appropriate control of domestic-acquired targets, the wealth gains to the shareholders of targets in foreign takeovers are similar to those in domestic takeovers. This paper investigates the validity of the competitive acquisition market in cross-border takeovers and concludes that : 1) in cases of inward foreign direct investment into the U.S., foreign firms do not realize significant net benefits from acquisitions; and 2) the foreign acquirer is as well informed as its U.S, counterparts about the target's market. The results of this study are consistent with the view that each country has different motivations for investing in the U.S. market. Consider, for example, Japan. The evidence suggests that Japanese companies pay a considerable price for U.S. targets which have performed poorly before the takeover. While there is no specific rationale to explain why Japanese firms buy the most volatile and worst performing firms, international barriers may provide a possible reason for these anomalies. Overall, the evidence of this paper supports the view that foreign takeovers occur in a competitive acquisition market.