• 대한치과보철학회지
• /
• 제59권1호
• /
• pp.97-106
• /
• 2021

임플란트를 사용한 수복치료에서는 보철물을 위한 이상적인 위치에 임플란트가 식립되어야 한다. 치조골이 부족한 환자의 경우에는 최종 보철물을 위한 적절한 연조직 및 경조직 지지를 얻기 위해서 수술적인 처치를 포함한 구강내 처치를 필요로 하게 된다. CAD-CAM 기술을 활용한 보철물 설계는 위와 같은 수술적 처치의 필요성에 대해 임상가가 사전적으로 평가해볼 수 있는 청사진을 제시해준다. 본 증례에서는 CAD-CAM system을 통해 환자의 치료 전 구내상황, 수술적 처치에 대한 예상, 일련의 임시 보철물을 반영하여 최종 보철물을 계획하고 제작하였다. 최종 보철물을 반영하여 제작한 수술용 가이드를 사용하여 임플란트를 식립함과 동시에 치조골 증대술을 시행하였다. 이후 CAD-CAM을 활용하여, 맞춤형 지대주와 1차 및 2차 잠정 수복물을 디자인하고 제작하였으며, 환자의 구내에서 평가를 거친 2차 잠정 보철물과 동일한 형태의 최종 보철물을 제작하였다. 저작, 발음, 심미 기능에 있어서 환자와 술자 모두 만족할만한 결과를 얻을 수 있었다.

• 대한치과보철학회지
• /
• 제45권2호
• /
• pp.228-239
• /
• 2007

Statement of problem: Following tooth loss, the edentulous alveolar process of maxilla is affected by irreversible reabsorption process, with progressive sinus pneumatization leads to leaving inadquate bone height for placement of endosseous implants. Grafting the floor of maxillary sinus by sinus lifting surgery and augmentation of autologous bone or alternative bone material is a method of attaining sufficient bone height for maxillary implants placement and has proven to be a highty successful. Purpose: This study was undertaken to clarify the morphometric characteristics of inferior maxillary sinus and alveolar process for installation of implants. Material and method: Nineteen skulls (37 sinuses, 10M / 9F) obtained from the collection of the department of anatomy and cell biology of Hanyang medical school were studied. The mean age of the deceased was 69.9 years (range 44 to 88 years). The distance between alveolar border and inferior sinus margin at each tooth, the height of alveolar process and the thickness of cortical bone of the outer and inner table of alveolar process and the inferior wall of maxillary sinus were measured. Results and Conclusion: 1. The septum of inferior maxillary sinus were observe 28 sides (76.%) and located at the third molar (52.6%) and the second molar (26.3%). The deepest points of inferior border of maxillary sinus were located the first or second molar. The distance between alveolar margin and the deepest point of inferior maxillary sinus is $9.7{\pm}4.9mm$. 2. The length of the outer table of alveolar process were $4.9\sim28.2mm$ and the shortest point was between the first and the second molors. The thickness of them were $0.9\sim3.2mm$. The length of the inner table of alveolar process were $7.4\sim25.8mm$ and the shortest point was between the first and the second molars. The thickness of the were $0.9\sim4.6mm$. The results of this study are useful anatomical data for installing of maxillary implants.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제23권4호
• /
• pp.324-331
• /
• 2001

The present study was aimed to investigate the effects of latency period on alveolar ridge distraction using the intraoral distraction device. Nine adult mongrel dogs of either sex, weighing about 15kg, were used. They were divided into 3-day, 5-day, and 7-day groups according to the latency period. The left upper and lower premolars and first molars were extracted. Twelve weeks after the extraction, an osteotomy was performed and the distraction device was applied. After the latency period, the distraction was applied at a rate of 1.2mm for 8 days. The distraction device was left in place for 2 weeks to allow consolidation and was then removed. The animals were sacrified at 8 weeks after completion of distraction and were examined macroscopically, radiographically, and histologically. After completion of the distraction, the alveolar crest protruded prominently, showing the vertical augmentation of the alveolar bone. Soft tissues were broken down after the 6th day of distraction in 3-day latency group, and premature union occurred on the 7th day of distraction in the 7-day latency group. The average distance was $9.40{\pm}0.3mm$ in 3-day latency group, $9.35{\pm}0.1mm$ in 5-day latency group, and $8.85{\pm}0.1mm$ in 7-day latency group. In the radiograph taken at 8 weeks after distraction, there was slight bone resorption around the medial and distal edges of the alveolar bone segment, and a new bone deposition was observed in the neighboring alveolar crest area in all groups. Fibrous tissues were present in a part of the buccal cortical bone area of the distraction gap, and the woven and lamellar bones were observed in the distracted gap. There were bony bridges in the distraction gap in all animals examined. These results suggest that optimal time of latency period on alveolar ridge distraction using the intraoral distraction device is about 5 days in dogs, and about 7days in human beings.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제28권2호
• /
• pp.154-165
• /
• 2006

Objectives : It is difficult to place implants at a severely atrophied edentulous mandible because of vertical and horizontal alveolar defect. The autogenous and allogenic bone graft and guided bone regeneration are useful, but there are some limitations such as the resorption and infection of the grafted bone, and insufficiency of soft tissue. Distraction osteogenesis has recently evolved a challenging technique to overcome major draws of conventional augmentation procedures, we, therefore, report the four applications of implant placement after vertical alveolar distraction osteogenesis. Patients and Methods : Four patients(all female, mean age: $60{\pm}6$ years) with severe alveolar ridge deficiencies at their anterior mandible were treated with vertical alveolar distraction osteogenesis by intraoral device(Track 1.5, 15 mm model, KLS Martin, Tuttlingen, Germany) and placement of implants (Branemark MK III, TiUnite). After the latency periods of 5, 7, 8 days, distraction rhythm and rate were $0.5\;mm{\times}2\;times/day$ in the case of good bone quality, and $0.25\;mm{\times}3\;times/day$ in the case of poor bone quality. After consolidation periods of mean fifteen weeks, five implants for each patients were placed at the interforaminal area. Results : On average, a vertical gain of $11.38{\pm}1.38\;mm$ was obtained by distraction. And all distraction zone showed complete ossification by panoramic radiography. There were no postoperative complications other than numbness of lower lip in one case. Total twenty implants in four patients were placed and their outcomes were satisfactory. Conclusion : It is a useful method to place five implants after vertical distraction osteogenesis of the severely atrophied mandible for the implant-supported fixed prosthesis.

• Journal of Periodontal and Implant Science
• /
• 제49권1호
• /
• pp.14-24
• /
• 2019

Purpose: To assess the influence of using different combinations of guided bone regeneration (GBR) materials on volume changes after wound closure at peri-implant dehiscence defects. Methods: In 5 pig mandibles, standardized bone defects were created and implants were centrally placed. The defects were augmented using different combinations of GBR materials: xenogeneic granulate and collagen membrane (group 1, n=10), xenogeneic granulate and alloplastic membrane (group 2, n=10), alloplastic granulates and alloplastic membrane (group 3, n=10). The horizontal thickness was assessed using cone-beam computed tomography before and after suturing. Measurements were performed at the implant shoulder (HT0) and at 1 mm (HT1) and 2mm (HT2) below. The data were statistically analysed using the Wilcoxon signed-rank test to evaluate within-group differences. Bonferroni correction was applied when calculating statistical significance between the groups. Results: The mean horizontal thickness before suturing was $2.55{\pm}0.53mm$ (group 1), $1.94{\pm}0.56mm$ (group 2), and $2.49{\pm}0.73mm$ (group 3). Post-suturing, the values were $1.47{\pm}0.31mm$ (group 1), $1.77{\pm}0.27mm$ (group 2), and $2.00{\pm}0.48mm$ (group 3). All groups demonstrated a loss of horizontal dimension. Intragroup changes exhibited significant differences in group 1 (P<0.001) and group 3 (P<0.01). Intergroup comparisons revealed statistically significant differences of the relative changes between groups 1 and 2 (P=0.033) and groups 1 and 3 (P=0.015). Conclusions: Volume change after wound closure was minimized by using an alloplastic membrane. The stability of the augmented horizontal thickness was most ensured by using this type of membrane irrespective of the bone substitute material used for membrane support.

• 대한심미치과학회지
• /
• 제25권1호
• /
• pp.35-49
• /
• 2016

최근 심미성에 대한 요구가 점점 증가함에 따라, 이제는 임플란트 수복에 있어서도 기능적인 면 뿐만 아니라 심미적인 면이 더욱 강조되고 있다. 상악 전치부 임플란트 수복은 임상가들에게 항상 도전적인 과제로 다가오는데 그 이유는 다음의 세 가지 요소를 모두 필요로 하기 때문이다. 첫째, 충분한 경조직이 필요하고 둘째, 충분한 연조직이 필요하며 그리고 셋째, 심미적인 수복물이 필요하다. 연조직의 심미성은 그 하부에 있는 경조직에 의존하게 되는데 그 이유는 하부의 경조직의 골격적인 지지가 있어야만 그것을 바탕으로 그 위에 건강하고 심미적인 연조직이 안정적으로 유지될 수 있기 때문이다. 그러므로, 경조직 재건은 심미적인 임플란트 수복에 있어서 첫번째 단계이며, 특히 3차원적으로 적절한 임플란트의 식립 위치 설정은 심미성 있는 최종 수복물을 얻기 위해서 가장 중요한 단계라고 할 수 있다. 그 다음으로 두번째 단계가 순측으로 충분한 두께의 연조직을 얻기 위한 수술 기법이며, 마지막 세번쨰 단계가 적절한 출현외곽을 갖는 임시 수복물을 통해서 얻어진 심미적인 최종 수복물이다. 본 임상 증례 보고는 순측의 골 열개 결손에서의 골 증대술 과정과 전치부 영역에 주로 사용되는 VIP-CT 라고 일컫는 유경 판막술을 이용한 연조직 증대술, 그리고 임시 수복물을 통한 연조직 형태 만들기와 맞춤형 인상 코핑을 이용한 인상채득법 등을 소개함으로써 경조직, 연조직, 수복물의 세 가지 요소가 심미적인 최종 수복물을 위해 서로 어떻게 조화를 이루어내는지 알아보고자 한다.

• Journal of Korean Neurosurgical Society
• /
• 제46권1호
• /
• pp.5-10
• /
• 2009

Objective: The purpose of this study is to evaluate the effectiveness of unilateral decompression and pedicle screw fixation for the unilateral symptomatic foraminal stenosis. Methods: The study group comprises consecutive 16 patients who underwent unilateral decompression and bone cement augmented pedicle screw fixation from May 2003 to January 2006. The patients were evaluated by visual analog scale (VAS) for pain and the scoring system of the Japanese Orthopedic Association (JOA) for low back pain. The result of surgery was also evaluated with McNab's classification. Excellent or good outcome was considered as successful. The patients were followed at postoperative 1 month, 3 month, 6 month, and 1 year with standing AP and lateral films. Results: The average VAS and JOA score of the 16 patients were 7.8(range, 6-9) and 5.8(range, 3 - 10) before surgery and 2.2(range, 0 - 5)and 12.3(range, 9 - 15) at the time of last follow up. Both VAS and JOA score improved significantly after the surgery (p<0.05, t-test). All patients improved after the operation and no revision surgery was required. No metal failure or pseudoarthrosis was observed during the follow-up. The success rate was 87.5%. Conclusion: Our data suggest that unilateral decompression and pedicle screw fixation for the unilateral symptomatic foraminal stenosis is an effect method for obtaining satisfactory clinical outcome. Its possible advantage is shorter operation time and reduced surgical extent. We believe that the reduced stiffness of unilateral fixation was compensated by pedicle screw augmentation and interbody fusion.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제33권3호
• /
• pp.281-285
• /
• 2011

Sinus floor elevation is a predictable and standard procedure for the treatment of the posterior maxilla before insertion of dental implants. Although overall complication rates are low, complications can occur including sinus membrane perforation, infection of sinus, swelling and hemorrhage. The most common complication is membrane perforation. Recently, various techniques and materials for repair of perforation to the sinus membrane have been proposed. The purpose of this article is to report on various techniques and materials that can be used for repair of perforations to the sinus membrane. The search protocol used was the following electronic database: Pubmed, with a time limit from 1998 to 2009. The key words such as 'sinus lift', 'sinus augmentation', 'sinus floor elevation', 'sinus graft', 'sinus perforation', 'repair of sinus perforation' and 'repair of sinus membrane' were used, alone and in combination, when searching the database. Various techniques have been proposed to manage of perforation of sinus membranes. These include that the use of collagen membranes, demineralized freeze-dried human lamellar bone sheets, processed human allografts, lamella bone, buccal fat pads and suturing. Implant success rate ranges from 69.9% to 98.9%.

• Journal of Periodontal and Implant Science
• /
• 제46권4호
• /
• pp.234-243
• /
• 2016

Purpose: Immediate loading of dental implants has been proved to be feasible in partially edentulous jaws. The purpose of this retrospective investigation was to assess the feasibility of immediately loading dental implants in fully edentulous jaws. Methods: A total of 24 patients aged between 53 and 89 years received a total of 154 implants in their edentulous maxillae or mandibles. Among the implants, 45 were set in fresh extracted sockets and 109 in consolidated alveolar bones. The implants were provisionally managed with chair-side made provisional resin bridges and exposed to immediate loading. Implants were followed up for 1-8 years, including radiographic imaging. Marginal bone levels were evaluated based on radiographic imaging. Results: A total of 148 out of the 154 implants survived over the follow-up period of 1 to 8 years, giving a survival rate of 96%. The time or region of the implantation, the pre-implant augmentation, and the length and diameter of the implants had no statistically significant influence on the survival or the success rate. The marginal bone level remained stable with only minimal loss of 0.3 mm after 60 months of loading. Conclusions: Within the limitations of this study, immediate loading is feasible for dental implants in edentulous jaws.

• Journal of Periodontal and Implant Science
• /
• 제44권1호
• /
• pp.33-38
• /
• 2014

Purpose: Autogenous bones are frequently used because of their lack of antigenicity, but good osteoconductive and osteoinductive properties. This study evaluated the biological behavior of perforated and nonperforated cortical block bone grafts. Methods: Ten nonsmoking patients who required treatment due to severe resorption of the alveolar process and subsequent implant installation were included in the study. The inclusion criteria was loss of one or more teeth; the presence of atrophy of the alveolar process with the indication of reconstruction procedures to allow rehabilitation with dental implants; and the absence of systemic disease, local infection, or inflammation. The patients were randomly divided into two groups based on whether they received a perforated (inner surface) or nonperforated graft. After a 6-month healing period, a biopsy was performed and osseointegrated implants were installed in the same procedure. Results: Fibrous connective tissue was evident at the interface in patients who received nonperforated grafts. However, full union between the graft and host bed was visible in those who had received a perforated graft. Conclusions: We found that cortical inner side perforations at donor sites increased the surface area and opened the medullary cavity. Our results indicate an increased rate of graft incorporation in patients who received such perforated grafts.