• Journal of Ginseng Research
• /
• 제22권3호
• /
• pp.205-210
• /
• 1998

Glucosidic bonds at the C20 position of the sapogenins were hydrolyzed easily in the lower pH, higher temperatures and longer times to give prosapogenins and sugars. The glucosidic bond of saponin at the C3 of ginsenoside-Rb1, which is secondary carbon, was relatively stable due to the low electron density of -0.2. But the bond of saponin at the C20 position, which is tertiary carbon with the relatively high electron density of -0.3, was liable to be hydrolyzed even in weakly acidic solution by the increase of heating time. On the other hand, red ginseng contained 13.34 mg/g of citric acid, 8.78 mg/g of malonic acid, 3.70 mg/g of oxalic acid, 2.13 mg/g of malic acid and 0.44 mg/g of succinct acid. Ginseng saponins were very stable in ginseng extract neutralized with sodium carbonate or sodium bicarbonate corresponding to the equivalent amount of the total organic acid in the red ginseng.

• Bulletin of the Korean Chemical Society
• /
• 제7권1호
• /
• pp.23-25
• /
• 1986

Reaction of ${\alpha}-cyano-{\beta}-phenylacrylic$ acid derivatives (Ⅰ) with thioglycolic acid in the molar ratio of 1:2 in saturated sodium bicarbonate solution yielded 3-(4'-oxo-2'-thiazolin-2'-yl)-2-phenyl-4-oxotetrahydrothiophene derivatives (V). Thioglycolic acid was found to be added not only to carbon-carbon double bond but also to carbon-nitrogen triple bond and those adducts were cyclized to V.

• Restorative Dentistry and Endodontics
• /
• 제17권1호
• /
• pp.104-114
• /
• 1992

The purpose of this study was to evaluate the shear bond strength of glass ionomer cement(Ketacfil, ESPE, Co.) against dentin surface which had been treated with surface conditioning agents(distilled water, 5% sodium hypochlorite solution, Ketac - conditioner, 40% polyacrylic acid). In this study, 60 human molars with sound and healthy crown portion which were previously extracted for orthodontic or periodontal problem. The dentin surfaces of these teeth were exposed with wet trimmer and polished with 150 - grit and 600 - grit silicon carbide paper and the teeth were divided into four groups(15 teeth per group) according to the following surface conditioning methods. Group I : Surface treatment with distilled water as control group. Group II : Surface conditioning with 5% sodium hypochlorite solution. Group III : Surface conditioning with Ketac conditioner. Group IV : Surface conditioning with 40% polyacrylic acid. The shear bond strengths were measured by Autograph(Shimatzu Co. Japan). The result of the evaluations were then subjected to statistical analysis using one - way analysis of variance and Duncan test and the results were as follows : 1. The shear bond strength accrding to the dentin surface conditioning conditions was highest in Ketac conditioner group, with measurements of $44.44{\pm}0.74(kg/cm^2)$ and lowest in the distilled water group, with measurements of $28.84{\pm}0.88(kg/cm^2)$. 2. Statistically significant differences were found between surface conditioning with 5% sodium hypochlorite solution group or Ketac conditioner group and distilled water group(P<0.01). 3. Also, statistically significant difference was found between surface conditioning with distilled water group and 40% polyacrylic acid group(P<0.05). 4. Overall difference in statistical significance between the groups was not found (P<0.05). 5. Fractured dentin surface treated with conditioning solutions showed cohesive fracture. 6. Distilled water group and 5% sodium hypochlorite solution group removed the smear layer less effectively. 7. Conditioning dentin with Ketac conditioner and 40% polyacrylic acid resulted in the removal of a significant amount of the smear layer without removing the tubular plugs and dissolving the peritubular dentin.

• Bulletin of the Korean Chemical Society
• /
• 제7권2호
• /
• pp.111-113
• /
• 1986

The axial alcohol in trans-3,3,5-trimethylcyclohexanol was oxidized more readily than the equatorial alcohol in cis-3,3,5-trimethylcyclohexanol by NBS in aqueous dioxane. On the contrary, the equatorial alcohol was preferentially oxidized to the axial one by 10% aqueous sodium hypochlorite in the presence of tetrabutylammonium hydrogen sulfate (TBHS). The specificity indicates the presence of two different mechanism. In acidic medium, the cleavage of C-H bond is rate determining step while the reactivity of the alcohol is important in the presence of TBHS. The mechanism in basic medium without TBHS will be discussed.

• Bulletin of the Korean Chemical Society
• /
• 제9권1호
• /
• pp.13-15
• /
• 1988

Several types of resocinols have been monobrominated in the ring in good yields with sodium bromide in the presence of 18-crown-6 on oxidation with m-chloroperbenzoic acid. Monoiodination takes place with 2'-(1-methylcyclohexen-3-yl)-5-(1,1-dimethylheptyl )-resocinol when sodium iodide is employed. This new reagent system, MX/18-crown-6/m-CPBA (M =$K^+, Na^+, X = Br^-, I^-X$ ), effects the regiospecific halogenation of activated aromatic ring over olefinic double bond.

• 대한화학회지
• /
• 제7권4호
• /
• pp.230-237
• /
• 1963

2-Methyl-5,5'-gem-disubstituted-$\Delta^2$-thiazoline系 化合物의 合成을 1,1'-gem-dusubstituted thiiranes의 三員環을 ammonis로 開環하여 骸當하는 N-또는 S-acetyl-amino mercaptan을 얻고 그것을 다시 閉環하는 方法과 또 하나는 같은 三員環인 gem-disubstitutes imines을 thiolacetic acid 로 開環하고 그것을 直接 다시 閉環하여 얻은 두가지 方法에 의하여 硏究하엿다. 前者는 thiirane ring은 gem-disubtitution의 compression 效果에 의하여 極히 安定化되어 여러가지 强力한 反應條件下에서의 sodium amide를 利用한 ammonia nuclephile에 頑强한 抵抗을 나타냈으며 反對로 後者의 三員環 imine은 같은 gem-disubstitution 效果를 받음에도 不拘하고 容易하게 開環하였다. 이 gem-disubstitution 效果에 의한 環狀化合物의 開環阻止性과 閉環促進性을 立體化學的인 見地에서 考察하였으며 本硏究로서 環狀化合物의 安定性에 미치는 gem-disubstitution의 compression 效果는 所謂 Thorpe-Ingold bond angle deformation에 緣由하는 것이 아니고 오히려 gem-dusubstituents와 異節環狀化物內의 hetero atom(s)이 미치는 bond interaction에 起因하다는 結論을 얻었다.

• 공업화학
• /
• 제31권5호
• /
• pp.560-567
• /
• 2020

본 연구는 다양한 산업공정의 배가스 중 대표적인 활성저하 물질로 알려진 알칼리 금속[Na(Sodium)과 K(Potassium)]이 V/W/TiO₂ 촉매의 NH₃-SCR 반응에 미치는 영향을 확인 하였다. 이에 따른 활성 저하 원인을 규명하고자 NO, NH₃-TPD, DRIFT, H₂-TPR 분석을 수행 하였다. 그 결과, 각 알칼리 금속은 촉매 피독으로 작용하여 NH₃ 흡착양이 저하되고, Na과 K은 촉매의 반응 활성에 기여하는 L산점과 B산점을 감소시켜 SCR 반응을 저하시킨다. H₂-TPR 분석을 통하여 알칼리 금속은 V-O-V (bridge oxygen bond)와 V=O (terminal bond)의 환원 온도에 영향을 끼쳐, 환원 온도가 고온으로 올라가기 때문에 활성 저하 원인으로 판단된다.

• Archives of Pharmacal Research
• /
• 제28권5호
• /
• pp.561-565
• /
• 2005

Bacterial arylsulfate sulfotransferase (ASST) catalyzes the transfer of sulfate group from a phenyl sulfate ester to a phenolic acceptor. The promoter region and the transcripti on start sites of Enterobacter amnigenus astA have been determined by primer extension analysis. Northern blot analysis resolved two mRNA species with lengths of 3.3 and 2.0 kb, which correspond to the distances between the transcriptional initiation sites and the two inverted repeat sequences (IRSs). By length, the 3.3 kb RNA could comprise the three-gene (astA with dsbA and dsbB) operon. ASST has three highly conserved cysteine residues. Reducing and non-reducing SDS-PAGE and activity staining showed that disulfide bond is needed for the activity of the enzyme. To identify the cysteine residues responsible for the disulfide bond formation, a series of Cys to Ser mutants has been constructed and the enzymatic activity was measured. Based on the results, we assumed that the first cysteine (Cys349) might be involved in disulfide bond mainly with the second cysteine (Cys445) and result in active conformation.

• Restorative Dentistry and Endodontics
• /
• 제40권3호
• /
• pp.202-208
• /
• 2015

Objectives: This study determined the effect of the air-stream application time and the bonding technique on the dentin bond strength of adhesives with different solvents. Furthermore, the content and volatilization rate of the solvents contained in the adhesives were also evaluated. Materials and Methods:Three adhesive systems with different solvents (Stae, SDI, acetone; XP Bond, Dentsply De Trey, butanol; Ambar, FGM, ethanol) were evaluated. The concentrations and evaporation rates of each adhesive were measured using an analytical balance. After acid-etching and rinsing, medium occlusal dentin surfaces of human molars were kept moist (conventional) or were treated with 10% sodium hypochlorite for deproteinization. After applying adhesives over the dentin, slight air-stream was applied for 10, 30 or 60 sec. Composite cylinders were built up and submitted to shear testing. The data were submitted to ANOVA and Tukey's test (${\alpha}=0.05$). Results: Stae showed the highest solvent content and Ambar the lowest. Acetone presented the highest evaporation rate, followed by butanol. Shear bond strengths were significantly affected only by the factors of 'adhesive' and 'bonding technique' (p < 0.05), while the factor 'duration of air-stream' was not significant. Deproteinization of dentin increased the bond strength (p < 0.05). Stae showed the lowest bond strength values (p < 0.05), while no significant difference was observed between XP Bond and Ambar. Conclusions: Despite the differences in content and evaporation rate of the solvents, the duration of air-stream application did not affect the bond strength to dentin irrespective of the bonding technique.

• 자원리싸이클링
• /
• 제18권6호
• /
• pp.30-37
• /
• 2009

소디움실리케이트 수용액으로부터 나트륨이온이 제거된 핵생성 산화실리케이트 수용액과 실리케이트 수용액을 pH 10~11로 조절하여 혼합한 다음, $20{\sim}80^{\circ}C$에서 솔-젤 반응하여 실리카 솔 입자를 제조하였다. 이 때 yellow silicomolybdate method를 이용하여 소디움실리케이트와 나트륨이온이 제거된 실리케이트 수용액의 특성과 이들 출발용액으로부터 솔-젤 반응에 의해 제조된 실리카 솔의 입자특성에 대하여 고찰하였다. $SiO_2$를 2 wt% 함유한 소디움실리케이트 수용액은 약 95% 이상의 반응성 실리케이트를 함유하며, 솔-젤 반응에 참여하는 반응성 실리케이트는 전체 실리카 기준 약 50% 정도이다. 반응온도가 증가함에 따라 silanol(Si-OH) 결합구조의 흡수피크 세기는 감소하고, siloxane(Si-O-Si) 결합구조의 흡수피크 세기가 증가하였다. 반응조건별로 제조된 실리카 솔 수용액의 zeta potential은 -40~-60 mV 범위로 분산성이 좋은 상태를 유지하였다. 실리카 솔 입자크기는 5~10 nm로 반응온도 증가에 따라 크기가 약간 감소하였다. 실리카 솔 제조 후, 2차 입자 성장을 위하여 실리케이트 수용액을 재 첨가하였을 경우에 실리카 솔입자 크기가 약 20 nm로 증가하였다.