• 대한안전경영과학회지
• /
• 제4권2호
• /
• pp.113-122
• /
• 2002

The marketing environment of recent security business has been changed as goods and service have been changed variously. Under this condition, the security corporations have been trying to have good relationship with customers and to have high gains as well. But the management of the customers in the bond marketing is not enough. Then, this paper suggests some methods to promote the CRM at bond brokerage in order to make profits in the security corporation. First, the customers will know the earning rate of the bond that they have and also they can analysis the difference selling the bond and keeping it until the due date. The developed bond management system analyzes customers' preference from questionaire which is responded by customers. It also can make customers actively sell and buy the bond through recommendations corresponding with customers' preference. Moreover, this paper suggests the video conference consulting system for close relationship with corporation and customers. We have tested this bond management system and we expect that this system activates the buying and selling of the bond that non-experts can easily invest bonds and the security corporations can increase profit.

• 한국지반환경공학회 논문집
• /
• 제14권12호
• /
• pp.23-30
• /
• 2013

비동결된 지반에서의 말뚝기초 지지력은 주면마찰력과 선단지지력에 의해 지배되는 것과 달리 동토지역에서의 말뚝기초지지력은 일반적으로 주면마찰력에 의해 지배된다. 동토지역에서 말뚝기초와 동결토 사이 접촉면에서 발현하는 주면마찰력은 동착강도로 정의하며, 동착강도는 동토지역 말뚝기초의 설계 지배정수로 알려져 있다. 동토지역에서 말뚝기초의 지지력을 지배하는 설계정수인 동착강도 특성을 분석하기 위하여 지난 50여 년 동안 많은 연구가 수행되었으며, 현재에도 활발히 연구가 수행 중에 있다. 하지만 동착강도의 경우 토사의 물성특성, 말뚝표면의 거칠기 및 외부적인 시험조건에 의하여 민감하게 반응하는 것으로 알려져 있어 현재까지 진행된 많은 연구들은 제한된 영향인자를 고려하여 수행되었다. 본 연구에서는 동결온도 및 수직응력 조건에 따른 동착강도 특성을 분석하기 위하여 대형 냉동챔버 내에서 직접전단시험을 수행하였으며, 시험결과를 바탕으로 기존에 동일한 조건으로 측정된 동결토 전단강도와 상관관계를 분석하였다. 또한, 향후 동결토 전단강도를 활용하여 동착강도를 추정할 수 있는 동착강도 비례계수를 산정하였으며, 기존 연구와의 비교분석을 통하여 기존 계수에 대한 문제점을 고찰하였다.

• 구강회복응용과학지
• /
• 제16권1호
• /
• pp.27-36
• /
• 2000

One of the methods to improve the softness and comfortness of denture base is the use of soft denture liners. In this study, specimens were made by 2 kinds of acrylic based soft lining materials and 2 kinds of silicone based soft lining materials, and bonded to acrylic resin(Lucitone $199^{(R)}$). Then they were tested the differences of tensile bond strengths according to the materials, thickness, surface treatment and failure mode. 1. Tensile bond strength according to soft lining materials was increased in order of Coe-$soft^{(R)}$, $Mollosil^{(R)}$, $Trusoft^{(R)}$, Ufi-Gel $C^{(R)}$. The differences between groups were statistically significant at level of 0.05. 2. Tensile bond strength according to thickness of soft lining materials was increased in order of 3mm, 2mm, 1mm. The differences between groups were not statistically significant. 3. Tensile bond strength of treated surface showed higher bond strength than nontreated surface. The difference between groups was not statistically significant. 4. The failure mode of Coe-$soft^{(R)}$, $Trusoft^{(R)}$, $Mollosil^{(R)}$ were mainly cohesive failure, and that of Ufi-Gel $C^{(R)}$ were mainly adhesive failure.

• Bulletin of the Korean Chemical Society
• /
• 제6권6호
• /
• pp.362-366
• /
• 1985

The hydrogen atom transfer reaction between substituted methane, $CH_3X,$ and its radical, $CH_2X(X=H,F,CH_3,CN,OH\;and\;NH_2$ was studied by MINDO/3 method. The transition state(TS) structure and energy barriers were determined and variation of the transition state and of the reactivity due to the change of X were analyzed based on the potential energy surface characteristics. It was found that the greater the radical stabilization energy. the looser the TS becomes; the TS occurs at about 15% stretch of the C-H bond, which becomes longer as the radical stabilization energy of $CH_2X$ increasers. The intrinsic barrier, ${\Delta}E*_{x.x},$ of the reaction with X was found to increase in the order $H The degree of bond stretch of the C-H bond stretch of the C-H bond at the TS also had the same order indicating that the homolytic bond cleavage of the C-H bond is rate-determining. Orbital interactions at the TS between LUMO of the fragment $C{\ldots}H{\ldots}C$ and the symmetry adapted pair of nonbonding, $n{\pm}(=n_1{\pm}n_2),$ or pi orbitals of the two X atoms were shown to be the dominant contribution in determining tightness or looseness of the TS. The Marcus equation was shown to apply to the MINDO/3 barriers and energy changes of the reaction.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1993년도 가을 학술발표회 논문집
• /
• pp.173-178
• /
• 1993

In order to quantify the effect of transverse reinforcement on the bond splitting behavior of reinforcement monotonic loading tests of 8 slmply beams were carried out. The reinforcing details and material properties were so determined that the bond splitting failure proceded the shear and flexural failure. A bond splitting strength derived from the experimental data and it accounts for following parameters: 1) Concrete Strength 2) Transverse reinforcement ratio and shape 3) Thickness of concrete cover 4)Deformation of reinforcement

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.853-858
• /
• 2003

A new method is proposed to obtain bond-slip model for an adhesive joint between FRP and concrete. Interface element, which can describe the bond behavior, is developed in order to overcome the restriction that complex constitutive relations cannot be modeled in analytic solution. Calibrating numerical bond-slip model to experimental results, multi-objective optimization problem is constructed by physical programming method, and is solved using genetic algorithm. The validity of proposed method is demonstrated by comparing known analytic solution and numerically optimized solution.

• 한국세라믹학회지
• /
• 제42권5호
• /
• pp.304-307
• /
• 2005

The possible configurations of hydroxyl group in hexagonal hydroxyapatite were identified through molecular orbital calculation. The molecular orbital interaction between O and H in hydroxyl column was analyzed using charge variation and Bond Overlap Population (BOP). We supposed 5 kinds of O-H bond configurations as cluster types of I, II, III, IV, and V. Mulliken's population analysis was applied to evaluate ionic charges of O, H, P, and Ca ions, and BOPs (Bond Overlap Populations) in order to discuss the bond strength change by the atomic arrangement. The stability of each O-H bond configuration was analyzed using bond overlap and ionic charge.

• 대한치과보철학회지
• /
• 제19권1호
• /
• pp.29-37
• /
• 1981

The bond strengths with ceramco porcelain were compared between precious alloy S, and non-precious alloys V.U. and R. And the changes in bond strengths of non-precious alloys with ceramco porcelain, according to surface preparations by sand blasting, longitudinal grinding, transverse grinding, and high polishing, were studied. The test specimens were prepared by firing porcelain doughnuts on the surface prepared alloy rods, and investing in dental stone. The specimens were subjected to shear loading forces. The conclusions drawn from the investigation are as follows: 1. The bond strengths with ceramco porcelain were higher in the non-precious alloys U and R, than in the precious alloy S. 2. The bond strengths were in descending order for R alloy, U alloy, V alloy, and S alloy. 3. The bond strengths were highest when the R alloy and U alloy were surface prepared by sand blasting. 4. All bond strength values were lowest when the alloy surfaces were prepared by high polishing.

• 한국전기전자재료학회논문지
• /
• 제11권12호
• /
• pp.1079-1083
• /
• 1998

In this study, ultrasonic power of Aluminum wire bonder, bond time and bond force are investigated and valued in order to minimize failure of bonding pad lift. We also tried to control those 3 factors properly. We got the conclusion that if we turn down the ability of ultrasonic power or bond time, we can get a pad lift from a boundary between bond pad ad wire because pad metal and wire joining is unstable, but it is best condition when it ultrasonic power is 100∼130unit, bond time is 15∼20msec and bond force is 4∼6gf.

• 치위생과학회지
• /
• 제13권3호
• /
• pp.330-338
• /
• 2013

5급 와동에서 상아질 접착제와 레진의 종류에 따른 미세누출을 알아보고자 64개의 건전한 상 하악 소구치 및 대구치에 5급 와동을 형성하였다. 형성된 와동에 4종의 상아질 접착제를 각각 적용하고 2종류의 복합레진을 수복하여 법랑질과 상아질 변연부 색소침투 정도를 실체현미경하에서 23배율로 관찰하여 미세누출 점수를 기록한 후 각 군 간의 유의성을 검정하였다. 연구 결과, 5급 와동 수복 시 상아질 접착제와 레진의 종류에 따른 미세누출은 통계적으로 유의하지 않았다. 그러나 복합레진 Filtek Z350XT Universal 적용 시 1단계 자가부식 접착제 Adaper Easy Bond에서 미세누출이 낮게 나타났고, 유동성레진 Filtek Z350XT Flowable 적용 시 3단계 전부식 접착제 Adaper Scotchbond Multi-Purpose, 2단계 전부식 접착제 Adaper Single Bond 2에서 미세누출이 낮게 나타났다. 따라서 복합레진 및 상아질 접착제의 선택적 적용이 가능하며 특히, 1단계 자가부식 상아질 접착제 적용 시 조작의 편이성과 시술시간의 단축에 유리할 것으로 생각된다.