• 한국표면공학회지
• /
• 제41권6호
• /
• pp.312-324
• /
• 2008

In this study, the functional property as a super abrasive material was secured for CBN powder by the electroless Ni-P plating on the surface of the particle. The plating solution has been prepared to control the surface morphology by regulating surfactants and process conditions. The effects of processing parameters on the surface morphology of CBN powder was discussed. The results are summarized as follows; A stable plating tendency was achieved from 1 hour after quantitatively dropping reducing agent. It was observed that more than 50% of the weight gain was obtained by Ni-P coating on the surface of CBN super abrasive powder. The morphology of the Ni-P coating layer is consisted of botryoidal and spiky type and it could be controlled by regulating processing parameters. Superior characteristic in terms of surface morphology was found in the nonionic surfactant XL-80N. It was found that XL-80N considerably decreased surface tension of CBN powder and Ni-P alloy surface then enhance wettability as well as plating rate. Metal coated CBN powder as a raw material of resin bond wheel has been developed through this investigation.

• 대한화학회지
• /
• 제19권1호
• /
• pp.65-70
• /
• 1975

韓國産土炭의 흄산의$性狀^{1,2}$과 그 應用(田畓用土壤改良劑 및 溶性燐質肥料製$造^3$ 아조染料의 製$造^4$에 關해서 報告한 바와 같이 8個의 페놀성 -OH기를 가진 흄산의 構造로 보아서 황化染料의 製造原料가 될수 있을 것으로 보고 그製造條件, 染色物의 堅窄度, 製造된 황化染料의 構造를 考察해서 遊休資源인 土炭에 對한 하나의 活用策을 講究하였다.

• Food Science and Biotechnology
• /
• 제15권1호
• /
• pp.107-111
• /
• 2006

Kernel oils of Lindera erythrocarpa seeds had high level of unusual fatty acid. Picolinyl ester of this unknown fatty acid showed molecular ion at m/z = 317 with other diagnostic ions such as m/z = 151, 191 (40 amu between two peaks), 204, and 218 on GC-MS. Characteristic peak at $720\;cm^{-1}$ appeared in IR spectrum. In $^1H-NMR$ spectrum both methylene protons at C-3 and C-6 resonated at ${\delta}2.309$ and ${\delta}2.012$, and methine protons of double bond resonated in lower magnetic field centered at ${\delta}5.296$ (C-4) and ${\delta}5.387$ (C-5) as multiplet (J = 9.7Hz). In $^{13}C-NMR$, signals at ${\delta}22.669$ and ${\delta}27.048$ were due to C-3 and C-6 of ${\delta}^4$-monoenoic acid. Results obtained from spectroscopic measurements confirmed unknown fatty acid as cis-4-tetradecenoic acid (cis-4-$C_{14:1}$). Main fatty acid components of oils were cis-4-$C_{14:1}$ (44.5-45.1%), oleic acid ($C_{18:1}$), 20.4-21.3%), and lauric acid ($C_{12:0}$, 11.6-12.4%), along with trace amounts of cis-4-$C_{12:1}$ and cis-4-$C_{16:1}$.

• 한국주거학회논문집
• /
• 제22권3호
• /
• pp.1-14
• /
• 2011

'Sustainable Development' has become one of the most important concepts of the 21st century, and efforts are being made to actively apply this conception in various fields of social studies. Sustainability can be discussed in terms of economy, environment and society. In the case of social sustainability, a key motivation is the weakened bond within communities that is an unfortunate characteristic of modern society. The core of social sustainability is therefore in promoting 'social interaction and communication' through constructing communities and physical environments that support them. This study is based on the understanding that areal enlargement of physical environment doesn't guarantee the vitality of created community spaces. The purpose of this study is to deduce the design objectives and strategies of communal spaces in apartment complexes for social interaction and communication. Social interaction and communication can be divided into two aspects: between a complex and the local society, and within the complex itself. Nine design objectives are deduced from sixteen research reports published by public research institutions after 2000 and several design strategies are found through architectural analyses of influential examples based on 5 fundamental values of communal space planning.

• Computers and Concrete
• /
• 제24권6호
• /
• pp.513-525
• /
• 2019

In this work, an experimental research has been performed on Steel Fiber-Steel Reinforced Concrete (SFSRC)specimens subjected to four-point bending tests to evaluate the feasibility of mutual replacement of steel fibers and conventional reinforcement through studying failure modes, load-deflection curves, stiffness of characteristic points, stiffness degradation curves and damage analysis. The variables considered in this experiment included steel fiber volume percentage with and without conventional reinforcements (stirrups or steel fibers) with shear span depth ratios of S/D=2.5 and 3.5. Experimental results revealed that increasing the volume percentage of steel fiber decreased the creation and propagation of shear and bond cracks, just like shortening the stirrups spacing. Higher crack resistance and suturing ability of steel fiber can improve the stability of its bearing capacity. Both steel fibers and stirrups improved the stiffness and damage resistance of specimens where stirrups played an essential role and therefore, the influence of steel fibers was greatly weakened. Increasing S/D ratio also weakened the effect of steel fibers. An equation was derived to calculate the bending stiffness of SFSRC specimens, which was used to determine mid span deflection; the accuracy of the proposed equation was proved by comparing predicted and experimental results.

• 한국자동차공학회논문집
• /
• 제1권2호
• /
• pp.103-116
• /
• 1993

Recently, engineering ceramics called as the 3 material have been concerned significantly with some excellent mechanical properties and many functions as new materials for high precision mechanical components and engineering parts for at large. Then, for designing engineering parts using engineering ceramics, bending strength value data with high reliability is more essential than any other mechanical properties. But, because of brittleness and structural characteristic, it is very hard to grind with conventional tools, and the generation of cracks and various defects of engineering ceramics parts during grinding machining process are serious problems. Thus, in present study, surface grinding experiments with various machining conditions using resin bond diamond wheels are carried out to obtain the most excellent guality of testpiece surface and optimum step of grinding process for the high efficient stock removal rate to save running time. As the results from grinding experiments and 3-points bending strength test of ground Al2O3 ceramics parts on Korean Standard, manufactured in our country and Japan, basic technology and know-how to develop the optimum grinding machining conditions and also high bending strength values with high reliability are obtained.

• 연구논문집
• /
• 통권24호
• /
• pp.63-79
• /
• 1994

This article reports a experimental study of the method to achieve a bond joint at lower temperature in a short time. DC magnetron sputtering of Sn, Sn/Pb, Sn/In and Sn/Cu on copper substrate was provided as an interlayer for Cu to Cu bonding under the air environment. Various examination was conducted and investigated on the effect of experimental parameters such as coating materials, coating time(or coating thickness), bonding temperature and bonding time etc. Bonding was performed at the temperature of $210^\circC-320^\circC$ for 0sec and interfacial reaction between the coated layer and copper substrate was examined using optical, scanning electron microscope and x-ray diffractometer. From the obtained results, it was found that intermetallic compounds layer consisted of $\eta-phase(Cu_6Sn_5)$ and $\beta-phase(Cu_3Sn)$ was formed at the joint interface for almost all coating materials. But the dominant phase formed in the preetched Cu substrate coated with Sn was $\beta-phase$. A characteristic morphology looks like a reaction ring, which was believed as the strong interconnecting regions between two substrates, was found to be formed on the reaction surface of copper substrates. The morphologies and compositions of the intermetallics, which depends on the regions of the reaction surface, was appeared as greatly different. Based on above results, the new bonding process to make the joint at lower temperature for short time can be admitted as a feasible process.

• Bulletin of the Korean Chemical Society
• /
• 제17권3호
• /
• pp.257-262
• /
• 1996

p-(2-Vinyloxyethoxy)benzylidenemalononitrile 2 and methyl p-(2-vinyloxyethoxy)benzylidenecyanoacetate 3 was prepared by the condensation of p-(2-vinyloxyethoxy)benzaldehyde 1 with malononitrile or methyl cyanoacetate, respectively. Vinyl ether monomers 2 and 3 polymerized quantitatively with radical initiators in γ-butyrolactone solution at 65 ℃. The trisubstituted terminal double bond participated in the vinyl polymerization and radical polymerization of 2 and 3 led to swelling polymers 4 and 5 that were not soluble in common solvents due to cross-linking. Under the same polymerization conditions ethylvinyl ether polymerized well with model compounds of p-methoxybenzylidenemalononitrile 6 and methyl p-methoxybenzylidenecyanoacetate 7, respectively, to give 1:1 alternating copolymers 8 and 9 in high yields. Polymers 4 and 5 showed a thermal stability up to 300 ℃ without any characteristic Tg peaks in DSC thermograms. Alternating copolymers 8 and 9 were soluble in common solvents such as acetone and DMSO, and the inherent viscosities of the polymers were in the range of 0.36-0.74 dL/g. Films cast from acetone solution were cloudy and tough and Tg values obtained from DSC thermograms were in the range of 59-60 ℃.

• 한국의류학회지
• /
• 제46권1호
• /
• pp.63-79
• /
• 2022

This study investigated the phenomenon of modern people enjoying tattoo culture in Korea from the perspective of post subculture. A qualitative study was conducted using both literature review and in-depth interview methods. For post-subculture perspectives, the theories of Maffesoli (2017) and Thornton (1996), which are suitable for interpreting contemporary tattoo culture, were reviewed in terms of seven concepts: sporadic network, grouping, fluid participation, temporary emotional bond, self-distinction, pursuit of underground culture, and display and concealment. Semi-structured questionnaires were constructed and administered based on the organized characteristics. Five cultural qualities of the tattoo phenomenon in Korea were derived based on post-subculture concepts. Sporadic formation is related to the pattern of inflow into tattoo culture, and "streaming" participation is based on fluid participation and temporary ties. Distinction within subculture is based on self-distinction and pursuit of underground. The costume-playing ordinary concept includes the characteristic of controlling the exposure of tattoos in society. Finally, formation of the consumer tattoo market was newly discovered in Korean tattoo culture.

• Restorative Dentistry and Endodontics
• /
• 제34권1호
• /
• pp.51-60
• /
• 2009

본 연구는 현재 시판 되고 있는 여러 개의 상아질 접착제를 임상 술식에서와 같은 방법으로 사용한 다음 열순환 후 접착계면의 변화를 관찰 비교하고자 했다. 발거 한지 한 달 이내인 대구치 28개의 교합면 상아질 표면에 4종의 상아질 접착제 (OptiBond FL [OP], AdheSE [AD], Clearfil SE Bond [CL], Xeno III [XE]) 중 하나를 적용한 뒤 복합 레진 (Premisa, Kerr) 을 1 mm 두께로 올린 후 광중합 하였다. $4^{\circ}C$ 증류수에서 6일간 보관한 뒤, 치아의 정중선으로부터 수직으로 절단 하여 그 중 절반의 치아에서 2 mm 두께의 시편을 얻은 다음 남은 반쪽의 치아는 10,000회의 열순환을 가한 뒤 ($5^{\circ}-55^{\circ}$, 침지 시간 25초, 대기 시간 5초) 같은 방법으로 2 mm 두께의 시편을 얻었다. 연마한 시편을 24시간 동안 50% ammoniacal silver nitrate solution에 담근 다음 photo-developing solution에서 8시간 동안 환원시켰다. 계면을 가로지르는 5개의 line상에서 wavelength dispersive spectrometry (WDS) detector를 이용하여 주사전상에 있는 원소들의 중량비를 계산하였다. 또한 열순환 전과 후의 시편에서 얻어진 5개의 silver 측정치를 서로 비교하였다. 열순환 전의 접착제층(adhesive layer)에서는 OP에서 가장 적은 silver의 투과가 관찰되었으며 (p < 0.0001), CL, AD, XE 순으로 투과 량이 증가함을 보였다. 혼성층 (Hybrid layer) 에서는 CL의 투과량이 가장 적었다 (p = 0.0039). 열순환 후에 접착제층과 혼성층에서 silver의 투과량은 증가하지는 않았다. Scanning electron microscopy (SEM) 사진을 통하여 각 시편의 접착 계면에서 접착제에 따른 특이적인 silver의 투과상을 관찰할 수 있었다. 전반적으로 OP 와 CL의 접착계면이 열순환 과정 중에도 온전히 유지됨을 볼 수 있었다. 접착 계면에서의 수분 투과 양상은 각 접착제에 따라 다른 형태를 보였으며 열 순환에 의해 유의할 만한 변화를 야기하지는 않았다.