• Journal of the Korean institute of surface engineering
• /
• v.41 no.6
• /
• pp.312-324
• /
• 2008

In this study, the functional property as a super abrasive material was secured for CBN powder by the electroless Ni-P plating on the surface of the particle. The plating solution has been prepared to control the surface morphology by regulating surfactants and process conditions. The effects of processing parameters on the surface morphology of CBN powder was discussed. The results are summarized as follows; A stable plating tendency was achieved from 1 hour after quantitatively dropping reducing agent. It was observed that more than 50% of the weight gain was obtained by Ni-P coating on the surface of CBN super abrasive powder. The morphology of the Ni-P coating layer is consisted of botryoidal and spiky type and it could be controlled by regulating processing parameters. Superior characteristic in terms of surface morphology was found in the nonionic surfactant XL-80N. It was found that XL-80N considerably decreased surface tension of CBN powder and Ni-P alloy surface then enhance wettability as well as plating rate. Metal coated CBN powder as a raw material of resin bond wheel has been developed through this investigation.

• Journal of the Korean Chemical Society
• /
• v.19 no.1
• /
• pp.65-70
• /
• 1975

Sulfur-dyes were manufactured from humic acid, $Na_2S_{2~3}$ and other additives at $200{\sim}250^{\circ}C$ for 3∼20 hrs. Sulfur-dyes from humic acid were fundamentally brown colors and could be changed from yellowish to grayish brown according to the additives. The colorfastness to rubbing and laundering were excellent but to weather was fair. Characteristic bonds of sulfur-dyes such as -C-S-C, -C-SO-C-. -C-$SO_2$-C-, and -C-O-$SO_2$-O-C- were confirmed but thiazole bond and thiazine ring were not done by IR-spectroscopy.

• Food Science and Biotechnology
• /
• v.15 no.1
• /
• pp.107-111
• /
• 2006

Kernel oils of Lindera erythrocarpa seeds had high level of unusual fatty acid. Picolinyl ester of this unknown fatty acid showed molecular ion at m/z = 317 with other diagnostic ions such as m/z = 151, 191 (40 amu between two peaks), 204, and 218 on GC-MS. Characteristic peak at $720\;cm^{-1}$ appeared in IR spectrum. In $^1H-NMR$ spectrum both methylene protons at C-3 and C-6 resonated at ${\delta}2.309$ and ${\delta}2.012$, and methine protons of double bond resonated in lower magnetic field centered at ${\delta}5.296$ (C-4) and ${\delta}5.387$ (C-5) as multiplet (J = 9.7Hz). In $^{13}C-NMR$, signals at ${\delta}22.669$ and ${\delta}27.048$ were due to C-3 and C-6 of ${\delta}^4$-monoenoic acid. Results obtained from spectroscopic measurements confirmed unknown fatty acid as cis-4-tetradecenoic acid (cis-4-$C_{14:1}$). Main fatty acid components of oils were cis-4-$C_{14:1}$ (44.5-45.1%), oleic acid ($C_{18:1}$), 20.4-21.3%), and lauric acid ($C_{12:0}$, 11.6-12.4%), along with trace amounts of cis-4-$C_{12:1}$ and cis-4-$C_{16:1}$.

• Journal of the Korean housing association
• /
• v.22 no.3
• /
• pp.1-14
• /
• 2011

'Sustainable Development' has become one of the most important concepts of the 21st century, and efforts are being made to actively apply this conception in various fields of social studies. Sustainability can be discussed in terms of economy, environment and society. In the case of social sustainability, a key motivation is the weakened bond within communities that is an unfortunate characteristic of modern society. The core of social sustainability is therefore in promoting 'social interaction and communication' through constructing communities and physical environments that support them. This study is based on the understanding that areal enlargement of physical environment doesn't guarantee the vitality of created community spaces. The purpose of this study is to deduce the design objectives and strategies of communal spaces in apartment complexes for social interaction and communication. Social interaction and communication can be divided into two aspects: between a complex and the local society, and within the complex itself. Nine design objectives are deduced from sixteen research reports published by public research institutions after 2000 and several design strategies are found through architectural analyses of influential examples based on 5 fundamental values of communal space planning.

• Computers and Concrete
• /
• v.24 no.6
• /
• pp.513-525
• /
• 2019

In this work, an experimental research has been performed on Steel Fiber-Steel Reinforced Concrete (SFSRC)specimens subjected to four-point bending tests to evaluate the feasibility of mutual replacement of steel fibers and conventional reinforcement through studying failure modes, load-deflection curves, stiffness of characteristic points, stiffness degradation curves and damage analysis. The variables considered in this experiment included steel fiber volume percentage with and without conventional reinforcements (stirrups or steel fibers) with shear span depth ratios of S/D=2.5 and 3.5. Experimental results revealed that increasing the volume percentage of steel fiber decreased the creation and propagation of shear and bond cracks, just like shortening the stirrups spacing. Higher crack resistance and suturing ability of steel fiber can improve the stability of its bearing capacity. Both steel fibers and stirrups improved the stiffness and damage resistance of specimens where stirrups played an essential role and therefore, the influence of steel fibers was greatly weakened. Increasing S/D ratio also weakened the effect of steel fibers. An equation was derived to calculate the bending stiffness of SFSRC specimens, which was used to determine mid span deflection; the accuracy of the proposed equation was proved by comparing predicted and experimental results.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.1 no.2
• /
• pp.103-116
• /
• 1993

Recently, engineering ceramics called as the 3 material have been concerned significantly with some excellent mechanical properties and many functions as new materials for high precision mechanical components and engineering parts for at large. Then, for designing engineering parts using engineering ceramics, bending strength value data with high reliability is more essential than any other mechanical properties. But, because of brittleness and structural characteristic, it is very hard to grind with conventional tools, and the generation of cracks and various defects of engineering ceramics parts during grinding machining process are serious problems. Thus, in present study, surface grinding experiments with various machining conditions using resin bond diamond wheels are carried out to obtain the most excellent guality of testpiece surface and optimum step of grinding process for the high efficient stock removal rate to save running time. As the results from grinding experiments and 3-points bending strength test of ground Al2O3 ceramics parts on Korean Standard, manufactured in our country and Japan, basic technology and know-how to develop the optimum grinding machining conditions and also high bending strength values with high reliability are obtained.

• 연구논문집
• /
• s.24
• /
• pp.63-79
• /
• 1994

This article reports a experimental study of the method to achieve a bond joint at lower temperature in a short time. DC magnetron sputtering of Sn, Sn/Pb, Sn/In and Sn/Cu on copper substrate was provided as an interlayer for Cu to Cu bonding under the air environment. Various examination was conducted and investigated on the effect of experimental parameters such as coating materials, coating time(or coating thickness), bonding temperature and bonding time etc. Bonding was performed at the temperature of $210^\circC-320^\circC$ for 0sec and interfacial reaction between the coated layer and copper substrate was examined using optical, scanning electron microscope and x-ray diffractometer. From the obtained results, it was found that intermetallic compounds layer consisted of $\eta-phase(Cu_6Sn_5)$ and $\beta-phase(Cu_3Sn)$ was formed at the joint interface for almost all coating materials. But the dominant phase formed in the preetched Cu substrate coated with Sn was $\beta-phase$. A characteristic morphology looks like a reaction ring, which was believed as the strong interconnecting regions between two substrates, was found to be formed on the reaction surface of copper substrates. The morphologies and compositions of the intermetallics, which depends on the regions of the reaction surface, was appeared as greatly different. Based on above results, the new bonding process to make the joint at lower temperature for short time can be admitted as a feasible process.

• Bulletin of the Korean Chemical Society
• /
• v.17 no.3
• /
• pp.257-262
• /
• 1996

p-(2-Vinyloxyethoxy)benzylidenemalononitrile 2 and methyl p-(2-vinyloxyethoxy)benzylidenecyanoacetate 3 was prepared by the condensation of p-(2-vinyloxyethoxy)benzaldehyde 1 with malononitrile or methyl cyanoacetate, respectively. Vinyl ether monomers 2 and 3 polymerized quantitatively with radical initiators in γ-butyrolactone solution at 65 ℃. The trisubstituted terminal double bond participated in the vinyl polymerization and radical polymerization of 2 and 3 led to swelling polymers 4 and 5 that were not soluble in common solvents due to cross-linking. Under the same polymerization conditions ethylvinyl ether polymerized well with model compounds of p-methoxybenzylidenemalononitrile 6 and methyl p-methoxybenzylidenecyanoacetate 7, respectively, to give 1:1 alternating copolymers 8 and 9 in high yields. Polymers 4 and 5 showed a thermal stability up to 300 ℃ without any characteristic Tg peaks in DSC thermograms. Alternating copolymers 8 and 9 were soluble in common solvents such as acetone and DMSO, and the inherent viscosities of the polymers were in the range of 0.36-0.74 dL/g. Films cast from acetone solution were cloudy and tough and Tg values obtained from DSC thermograms were in the range of 59-60 ℃.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.46 no.1
• /
• pp.63-79
• /
• 2022

This study investigated the phenomenon of modern people enjoying tattoo culture in Korea from the perspective of post subculture. A qualitative study was conducted using both literature review and in-depth interview methods. For post-subculture perspectives, the theories of Maffesoli (2017) and Thornton (1996), which are suitable for interpreting contemporary tattoo culture, were reviewed in terms of seven concepts: sporadic network, grouping, fluid participation, temporary emotional bond, self-distinction, pursuit of underground culture, and display and concealment. Semi-structured questionnaires were constructed and administered based on the organized characteristics. Five cultural qualities of the tattoo phenomenon in Korea were derived based on post-subculture concepts. Sporadic formation is related to the pattern of inflow into tattoo culture, and "streaming" participation is based on fluid participation and temporary ties. Distinction within subculture is based on self-distinction and pursuit of underground. The costume-playing ordinary concept includes the characteristic of controlling the exposure of tattoos in society. Finally, formation of the consumer tattoo market was newly discovered in Korean tattoo culture.

• Restorative Dentistry and Endodontics
• /
• v.34 no.1
• /
• pp.51-60
• /
• 2009

The purpose of this study was to perform quantitative comparisons of water permeable zones in both the adhesive and the hybrid layer before and after thermo cycling in order to assess the integrity of the bonding interface. Twenty eight flat dentin surfaces were bonded with a light-cured composite resin using one of four commercial adhesives [OptiBond FL (OP), AdheSE (AD), Clearfil SE Bond (CL). and Xeno III (XE)]. These were sectioned into halves and subsequently cut to yield 2-mm thick specimens; one specimen for control and the other subjected to thermocycling for 10,000 cycles. After specimens were immersed in ammoniacal silver nitrate for 24 h and exposed to a photo developing solution for 8 h, the bonded interface was analyzed by scanning electron microscopy (SEM) and wavelength dispersive spectrometry (WDS) at five locations per specimen. Immediately after bonding. the adhesive layer of OP showed the lowest silver uptake, followed by CL, AD. and XE in ascending order (p < 0.0001); the hybrid layer of CL had the lowest silver content among the groups (p = 0.0039). After thermocycling, none of the adhesives manifested a significant increase of silver in either the adhesive or the hybrid layer. SEM demonstrated the characteristic silver penetrated patterns within the interface. It was observed that integrity of bonding was well maintained in OP and CL throughout the thermocycling process. Adhesive-tooth interfaces are vulnerable to hydrolytic degradation and its permeability varies in different adhesive systems, which may be clinically related to the restoration longevity.