• Journal of the Korean Home Economics Association
• /
• v.19 no.2
• /
• pp.11-24
• /
• 1981

The objectives of the study were to determine 1) if energy consumption and conservation vary in clothing, food, and housing with independent variables-size of household, homemaker's age, employment, and level of education, level of living, type of house, electricity use, and all energy use, and 2) if there is a correlation among energy conservation practices in clothing, food, and housing. Questionnaires wee given to the randomly selected homemakers in Seoul in July, 1980. Data from 620 responses were analyzed by F-test (Analysis of Variance) and Correlation. The results are as follows: 1. Clothing (1) the scores of the conservation practices I clothing were generally high. /However, it was found that a) they did not practice in wearing heavy under clothes and behavior outer clothing to cope with cool room temperature in the winter, b) they did not use bleach for laundry, but they used boiling method, and c) they did not have enough knowledge on Permanent Press finish. (2) energy conservation practices in clothing were significantly related to level of living and homemakrer's level of education. a) The higher the level of living, the higher scores in the knowledge were found. b) the higher the homeakcer's level of education, the higher scores in the knowledge and ironing were obtained. 2. Food (1) The scores of the conservation practices in food were generally high. However, it was found that scientific cooking methods were not performed such as a) to use measuring spoons, cups, and timers, b) to practice a simple method in using solor energy for warming water, c) to use thermos for the hot water tea or coffee, but they boiled water whenever necessary, and b) to use the pressure cooker whenever possible. (2) Energy conservation practices in food were significantly related to homemaker's employment and type of dwellings. a) The scores of full-time homemakers (not gainfully employed) were higher than gainfully employed homemakers. b) Families in traditional Korean dwellings revealed higher scores than those in apartment or western style dwellings. 3. Housing (1) The scores of the conservation practices in housing were generally high. However, it was found that a) they did not install fans in the kitchen, bathroom, and attic in the summer, b) they did not install a humidifier for tolerating a lower room temperature in the winer, c) they did not practice to make plans for the door of the refrigerator remained open for the shortest time, d) they did not install or use a local lighting with a general lighting for reading and cooking, and e) they usedaluminum foil without the knowledge of the heat reaction of its shiny and dull sides. (2) energy conservation practices in housing were significantly related to homemaker's employment and level of education, economic status, types of dwelling, and all energy use, a) Full-time homeakers had higher scores than gainfully employed homeakers. b) the higher the homemaker's level of education and economics status, the higher scores were obtained. c) Homeakers with their own house scored higher points than those with rented houses. And families in apartment or row houses scored higher points than those in traditional korean or western style dwellings. d) The higher the consumption rate of electricity and all energy, the higher scores were revealed. 4. correlation there was a significant correlation among energy conservation practices I clothing, food, and housing.

• Korean Journal of Food Science and Technology
• /
• v.16 no.2
• /
• pp.254-256
• /
• 1984

The amounts of husk materials from barley kernel were determined by an enzymatic method and compared with the values determined by conventional methods involving acid or alkaline treatments. The enzymatic method consists of boiling in distilled water and pressing to help squeeze out the gelatinized starch from the husk matrix, and enzymatic removal of starch by ${\alpha}-amylase$ and weighing the residual husk materials after washing 3 times with hot water and then drying at $95^{\circ}C$. Husk materials amounted about 15 of the covered barley (Gangbori and Olbori) and 10-12% of naked variety (Backdong and Sedohadaga) and the values were always somewhat higher than those obtained by the conventional methods. The husk materials prepared by the enzymatic procedure contained protein 4-8%, lipid 5-10%, ash 0.2-0.6% and crude fiber 20-40%. Although it took longer time, the enzymatic procedures can provide more intack husk materials for further characterization of the materials.

• Resources Recycling
• /
• v.29 no.1
• /
• pp.17-24
• /
• 2020

In this study, rare earth elements (REE) leaching from a refractory REE ore containing goethite as a major gangue mineral was conducted, introducing a two-stage method of chemical decomposition-acid leaching. At the chemical decomposition step, using one of alkaline agent, NaOH, the ore was decomposed, changing NaOH concentration from 20 to 50 wt% at 10% (w/w) of pulp density and the maximum temperature achieved without boiling at each NaOH concentration. With increasing NaOH concentration, light REE (Ce, La and Nd) and iron were concentrated in the solid phase which is the decomposed product, while aluminum (Al) and phosphorus (P) were removed to the liquid phase, and their concentrations in the solid phase were down to 0.96 and 0.17%, respectively. In addition, through XRD analysis, it was found that the crystallinity of goethite was considerably decreased. At the acid leaching step, the product decomposed by 50 wt% NaOH was leached at 3.0 M HCl and 80 ℃ for 3 hr, then the REE leaching efficiency was above 94% (Ce 80%), and the leaching efficiencies of Al and P were decreased to 12 and 0%, respectively. Therefore, in terms of both REE leaching efficiency and impurity removal, those decomposition and leaching conditions were chosen as optimum processing methods of the investigated material. In terms of REE leaching mechanism, because REE and iron leaching efficiencies showed the positive correlation each other, so it can be concluded that decreasing crystallinity of goethite affect the improvement of REE leaching.

• Clean Technology
• /
• v.29 no.4
• /
• pp.262-271
• /
• 2023

Globally, the amount of waste plastics has been occurring to environmental problems. As a result, it is necessary to research methods that utilize waste plastic pyrolysis oil (WPPO) produced by pyrolysis. One such method being studied is utilizing WPPO as a naphtha feedstock. In this study, five types of WPPO were analyzed to determine whether they can be used as raw materials for naphtha. Because of their wide boiling point range, the WPPOs were fractionated into light and heavy fractions through vacuum distillation, and the separation and purification techniques were analyzed using GC-VUV to determine the content of paraffin, olefin, and other compounds. All WPPOs showed high olefin content regardless of the source and fraction. Aromatic and paraffin content varied depending on the source, and oxygen and other compounds also varied significantly by source and fraction. In addition, the light fraction showed a carbon distribution similar to that of naphtha, whereas the heavy fraction showed a carbon distribution of C₁₁ ~ C₁₄. In conclusion, additional processes and raw material selection are required to utilize waste plastic pyrolysis oil as a raw material for naphtha.

• Journal of the Korean Society of Food Culture
• /
• v.4 no.3
• /
• pp.245-251
• /
• 1989

To estimate the nutritional values and the optimum cooking method of the Cow's rumen-reticulum (tripe) which is a Korean traditional food, the nutrients of raw tissue of tripes, the changes in total N, ${\alpha}-amino$ N, calcium and phosphorus contents and nucleotides and their related compounds contents in soup stock prepared of tripe tissues according to various boiling time period with saucepot or pressure cooker and various ratios of the water to the tripe (wt/wt) were measured. No significant difference was observed in nutrients contents between rumen (1st stomach) and reticulum (2nd stomach) which contained 83% moisture, 0.4-0.5% ash, 3% fat, 13% protein, 50-56 mg% calcium, 75-76 mg% phosphorus. 75-77 mg% ${\alpha}-amino$ N on fresh weight basis. The results obtained show that the significant loss of nutrients observed after removing epitherial cell layer from tripe, and in aspect of the nutrients contents, the nucletides contents, and the sensory evaluation score in soup stock, the optimum cooking time period of tripe was 8 hours in boiling in saucepot and 1 or 2 hours in cooking in pressure cooker, and the ratio of the water to the tripe (wt/wt) was above ten.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.26 no.12
• /
• pp.605-619
• /
• 2014

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2013. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of fluid machinery, pipes and relative parts including orifices, dampers and ducts, fuel cells and power plants, cooling and air-conditioning, heat and mass transfer, two phase flow, and the flow around buildings and structures. Research issues dealing with home appliances, flows around buildings, nuclear power plant, and manufacturing processes are newly added in thermal and fluid engineering research area. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results for general analytical model for desiccant wheels, the effects of water absorption on the thermal conductivity of insulation materials, thermal properties of Octadecane/xGnP shape-stabilized phase change materials and $CO_2$ and $CO_2$-Hydrate mixture, effect of ground source heat pump system, the heat flux meter location for the performance test of a refrigerator vacuum insulation panel, a parallel flow evaporator for a heat pump dryer, the condensation risk assessment of vacuum multi-layer glass and triple glass, optimization of a forced convection type PCM refrigeration module, surface temperature sensor using fluorescent nanoporous thin film. In the area of pool boiling and condensing heat transfer, researches on ammonia inside horizontal smooth small tube, R1234yf on various enhanced surfaces, HFC32/HFC152a on a plain surface, spray cooling up to critical heat flux on a low-fin enhanced surface were actively carried out. In the area of industrial heat exchangers, researches on a fin tube type adsorber, the mass-transfer kinetics of a fin-tube-type adsorption bed, fin-and-tube heat exchangers having sine wave fins and oval tubes, louvered fin heat exchanger were performed. (3) In the field of refrigeration, studies are categorized into three groups namely refrigeration cycle, refrigerant and modeling and control. In the category of refrigeration cycle, studies were focused on the enhancement or optimization of experimental or commercial systems including a R410a VRF(Various Refrigerant Flow) heat pump, a R134a 2-stage screw heat pump and a R134a double-heat source automotive air-conditioner system. In the category of refrigerant, studies were carried out for the application of alternative refrigerants or refrigeration technologies including $CO_2$ water heaters, a R1234yf automotive air-conditioner, a R436b water cooler and a thermoelectric refrigerator. In the category of modeling and control, theoretical and experimental studies were carried out to predict the performance of various thermal and control systems including the long-term energy analysis of a geo-thermal heat pump system coupled to cast-in-place energy piles, the dynamic simulation of a water heater-coupled hybrid heat pump and the numerical simulation of an integral optimum regulating controller for a system heat pump. (4) In building mechanical system research fields, twenty one studies were conducted to achieve effective design of the mechanical systems, and also to maximize the energy efficiency of buildings. The topics of the studies included heating and cooling, HVAC system, ventilation, and renewable energies in the buildings. Proposed designs, performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment is mostly focused on indoor environment and building energy. The main researches of indoor environment are related to infiltration, ventilation, leak flow and airtightness performance in residential building. The subjects of building energy are worked on energy saving, operation method and optimum operation of building energy systems. The remained studies are related to the special facility such as cleanroom, internet data center and biosafety laboratory. water supply and drain system, defining standard input variables of BIM (Building Information Modeling) for facility management system, estimating capability and providing operation guidelines of subway station as shelter for refuge and evaluation of pollutant emissions from furniture-like products.

• Korean Journal of Heritage: History & Science
• /
• v.52 no.4
• /
• pp.170-183
• /
• 2019

Fiber scutching refers to the process of extracting fibers from plants by separating or extracting fibers from the raw materials. As the definition of the term implies, the "Fiber Scutching" is performed on plants with advanced bast fiber as the primary material processing technique performed on plant materials. Some of the most popular phosphorus plants are ramie, hemp, flax, and the paper mulberry, which have a long history of cultivation and a wide range of distribution, making them very universal as a material supporting human life and culture. This study was described in Oju-yeonmunjangjeon-sango but was designed to re-examine the method of breaking dried stalks, which is currently unused in Korea, to examine the feasibility and characteristics of the technology. As a result of sampling and experimenting with hemp bast using the method recorded in the literature, hemp fiber was actually produced. The criteria for removing the shell from the hemp stem were the degree of discoloration and drying, and only when the stalk was completely discolored to yellow could segregation of the stalk from the shell be performed. The amount of sunlight and temperature were conditions that accelerated drying. However, if exposed for a long time, it is confirmed that hemp bast will be in a suitable condition to process, regardless of the amount of sunlight and temperature. 'Breaking of dried stalks', which utilizes the physical power of 'threshing with a flail' is considered a core process of the fiber scutching technique in 'Yukjin' in Hamgyeong-do. The bark and the core of the hemp were separated by tapping, the bast was thinly split, and the shell was peeled off, making it suitable for collecting with thread. The method of collecting the fibers by applying physical power causes downing on the fibers, which is to be generally avoided in the manufacture of bast fabric woven hemp or ramie. However, Hamgyeong-do's fiber scutching method seems to have applied this principle to the method of making fragile fabrics by using it in reverse. This method is distinct from the steaming or boiling of the stalks' in Andong, Korea, and it is similar to the Western method of spinning fabrics.

• Applied Biological Chemistry
• /
• v.40 no.6
• /
• pp.536-540
• /
• 1997

Volatile terpenoids of carrots were measured by the direct headspace sampling method(DHS) with gas chromatography as a study for the breeding of high quality carrots. Using this method, 7 terpenoids such as ${\alpha}-pinene$, ${\beta}-pinene$, ${\beta}-myrcene$, ${\alpha}-terpinene$, limonene, ${\gamma}-terpinene$, and terpinolene were clearly separated. However ${\alpha}-phellandrene$ was not clearly separated from ${\beta}-myrcene$. In addition to this, higher boiling point compounds such as terpinen-4-ol, bornyl acetate, and ${\alpha}-bisbolol$ were not found. The coefficients of $determination(r^2)$ for the 7 terpenoids were higher than 0.99 and the standard curves were highly significant. Four replicated samples using this method demonstrated great reproducibility; the coefficidnt of variation (C.V.) for ${\alpha}-pinene$, ${\beta}-pinene$, ${\beta}-myrcene$, limonene, ${\gamma}-terpinene$, terpinolene, and total terpenoids were 6.8, 6.8, 8.4, 7.1, 3.8, 10.1, 7.1%. Sixty five carrot cultivars breeded worldwide were evaluated for the 7 terpenoids and total terpenoids; the range for ${\alpha}-pinene$, ${\beta}-pinene$, ${\beta}-myrcene$, ${\alpha}-terpinene$, limonene, ${\gamma}-terpinene$, terpinolene, and total terpenoids were $0.28{\sim}2.48\;ppm$, $0.35{\sim}1.87\;ppm$, $0.56{\sim}1.51\;ppm$, 0 ppm, $0.59{\sim}1.84\;ppm$, $0.87{\sim}3.33\;ppm$, $5.15{\sim}35.81\;ppm$, and $9.07{\sim}42.30\;ppm$, respectively. Big differences in each terpenoid and total terpenoids were found among cultivars. On the total terpenoids of the 65 cultivars, 5 cultivars(7.7%) contained less than 10 ppm, 15 cultivars (23.1%) $10{\sim}11.99\;ppm$, 14 cultivars(21.5%) $12{\sim}13.99\;ppm$, 9 cultivars(13.8%) $14{\sim}15.99\;ppm$, 10 cultivars(15.4%) $16{\sim}17.99\;ppm$, 4 cultivars(6.2%) $18{\sim}19.99\;ppm$, 5 cultivars(7.7%) $20{\sim}29.99\;ppm$, and 3 cultivars(4.6%) were higher than 30 ppm. Generally, cultivars developed in Japan contained less total terpenoids than cultivars developed in Europe and America.

• The Journal of the Convergence on Culture Technology
• /
• v.4 no.3
• /
• pp.15-26
• /
• 2018

This is a qualitative study conducted to understand and explain the experience of nursing students' exploring historic sites of independence movement overseas. The study's participants were 24 nursing students in the first and second graders who participated in a program to explore the historic sites of independence movement overseas at a college in C County, Gyeongsangbuk-do. The data collection period was from December 23, 2017 to December 25, 2017. The data collection was carried out in an open self-reporting process, and the collected data were analyzed using the qualitative content analysis method of Krippendorff[13]. Based on the analysis of the experience of nursing students' exploring historic sites of independence movement overseas 19 sub-theme, 10 themes, and 4 categories were derived. The four categories are "Our History Represented in the wake of the independence movement", "Footprint projected of an independent activist ", " Rage Boiling But Hope Remaining", "blooming patriotism through reflection". The results of this study provided an understanding of nursing students' experience in exploring the historical sites of independence movement and have shown that nursing students had the opportunity to recognize the history of independence movements, inspire patriotism and reflect on their attitude as nurses. In addition, institutional efforts and resources should be supported to address the lack of policies on the preservation of the historic sites for independence movements overseas, which are dependent on the private sector.

• Journal of Energy Engineering
• /
• v.17 no.1
• /
• pp.38-45
• /
• 2008

In this work, we investigated the variation of physical and chemical characteristics of solvent-insolubles and solvent-solubles in Canada's Athabasca oil sands by solvent-insolubles experiments. N-Heptane, n-Hexane, and n-Pentane were tested for solvents and asphaltenes were separated from maltenes by using a modified ASTM D 3279 method. Elemental analysis, boiling point distribution (SIMDIS), molecular weight distribution, heavy metal contents, API gravity, viscosity and SARA fractions were measured for thorough samples. The asphaltenes-removed maltenes contained less sulfur and heavy metal amounts and had lower molecular weight than the original bitumen. N-Pentane solvent could lower sulfur and heavy metal amounts, molecular weight, and viscosity of maltenes compared to the other solvents. Eventually, we confirmed that the obtained experimental data could be used as basic informations of bitumen upgrading processes for the production of SCO (synthetic crude oil).