• 대한기관식도과학회:학술대회논문집
• /
• 대한기관식도과학회 1982년도 제16차 학술대회연제순서 및 초록
• /
• pp.17.2-19
• /
• 1982

중이 병변에 관한 수술적 처치는 그 병소 부위가 고막에 국한되어 있거나 중이 강 전벽부 및 내면부의 경우 수술시야가 좋아서 그 처치가 용이하며 술후 청력개선 및 치유경과도 만족할만하며 다양한 수술적 처치방법이 연구되어 널리 시행되고 있다. 그러나 아직도 중이강 후벽이나 상고실에 있는 병소의 처리방법에 대하여서 많은 문제점을 노출시키고 있으며 그 이유로서는 첫째 수술 시야의 장애, 둘째 안면신경 손상의 위험, 셋째 등골 주변부 병소 조작에 의한 외임프의 유출 및 미로 손상의 위험, 넷째 상고실 부위가 너무 협소하여 수술시 병변 확인이 힘든 경우등을 들수 있다. 특히 Staged operation (단계수술)과 Intact Canal Wall Typanoplasty(외청도 보존형 유양동 삭개술)이 소개된 이후로는 더욱더 중이강후벽에 대한 해부학적 지식이 더욱 절실하게 되었으며, 두개골의 인종적 차이를 감안 할때 한국인에 대한 중이강 후벽의 구조적 연구를 필요로 하게 되었다. 중이강의 후벽(유돌벽)은 Reichert's 연골에서 기원되며 제 2새궁(Second branchial arch)에서 발생되며 이 후벽의 구조물중 Sinus tympani는 이관의 내피와(endothelial pouch) 중 후낭 (Saccus posticus) 에서 함기화 (pneumatization)된 중이봉소로서 이부위 병변의 제거가 중이수술시 중요한 의의를 갖는 이유는 만성중이염에 의해 염증성반응이 오래 지속되면 비 후된 점막에 의해 Sinus tympani가 밀폐되고, 지속되는 자극에 의해 주로 안면신경관의 골성부와 등골 및 후반규관(Posterior Semicircular Canal)의 골성부에 육아조직을 형성하기 쉬울뿐더러 진주종에 의해 이 부위의 침식성 파괴를 이르켜 각각의 조직을 노출시킴으로 인해 중요한 합병증을 초래하기 쉬우며 수술로 인한 중대한 후유증이 병발하기 쉬운 곳이므로 임상면에서 중요하다. 그러므로 오래 전부터 이곳 병변의 안전한 제거를 위해 여러사람의 끊임없는 연구가 있었다. Amjad (1968), Donaldson (1970)등은 각각 24개, 20개의 측두골 계측을 실시하여 Sinus tympani의 형태 해부하적 구조에 대하여 연구한 결과 Sinus tympani의 크기와 모양은 여러형태로 변형이 많으며, 특히 주위 중요한 조직과 연관성이 많은 Sinus tympani의 가장 은밀한 심부 (Deepest portion)는 거의 대부분 후부로 신전되는 경우의 변형이 많아 주위조직의 손상없이 Sinus tympani의 병변을 제거하기 힘든 형태라는 결론을 내리고 이곳의 수술적 처리에서 발생 할 수 있는 여러 문제점을 지적하였다. Jako (1965) 등은 Sinus tympani병소의 안전한 제거를 위해 Sinus tympani를 확인할 수 있는 광학거울 (Fine-grade optical mirror)을 이 부위에 넣고 반사시야에서 수술적 처치를 시행할 것을 주장했으나, 수술시의 출혈등에 의한 명료시야의 확보에 문제점이 있어 널리 시행되지 않았다. Saito(1971)등은 Sinus tympani의 접근방법으로서 종래의 중이강내에서 접근방식 (Tympani approach) 보다 유양동을 통한 접근(mastoid approach)이 보다 편리하고 확실한 방법일 것이라는 생각으로 42개의 측두골에 대한 미세해부학적 계측을 실시하였다. 그러나 연구결과에서 그는 Sinus tympani의 상부는 안면신경과 지나치게 가까운 거리에 있어 접근이 용이하지 않았고 후부는 이낭(Otic capsule)에서 발생한 중치밀골(Hard compact bone)로 되어 있으며 안면신경 과 후반규관 사이가 협소하여 수술시 micro-drill burr로서 제거하기가 용이치 않다는 사실을 밝혀내고 mastoid approach로는 Sinus tympani 접근이 힘들다는 결론을 지었다. Goodhill (1973)등은 술자의 위치에서 수술의 전 과정을 시행하는 보편적인 방법에서는 Sinus tympani의 병변제거가 힘들므로 술자의 위치의 반대방향에서 현미경적 시야를 확보함으로써 은밀한 부위의 병변제거가 용이하다는 Circumferential approach 방법을 주장하였으나 수술부위의 감염성이 높다는 점이 문제점으로 지적되었다. 한편 Sinus tympani와 함께 수술시 문제점이 될 수 있는 후벽구조의 일부인 facial recess는 내피와(Endothelial pouch)중 상낭(Saccus superior)과 내낭(Saccus medius)에서 발생한다. 최근 Intact Canal Wall Tympanoplasty에 대한 활발한 연구가 진행되고 이에 따라 단계수술을 시행하는 빈도가 증가함에 따라 이 수술의 성공여부에 관건이 되는 중이강과 유양동의 통기(Ventilation)를 유지시키기 위해서 facial recess에 대한 많은 연구가 있었다. Sheehy(1967)등은 facial recess를 개방하는 이유로서는 첫째 facial recess의 병변이 제거되고 둘째 골성고실륜(bony annulus)을 손상시키지 않고 난원창과 중이강 후부를 노출시킬 수 있으며 셋째 atticotomy를 시행치 않고도 안면신경의 일부와 상고실 (epitympsnum) 을 노출시키는 것이 용이하며 넷째 수술후 유양동의 통기를 유지시키는 Posterior tympanotony를 주장하였다. 중이수술을 성공적으로 시행하려면 중이강후벽의 정확한 형태해부학적 구조를 이해하고 이 부위 병변을 제거하는 용이한 접근방법에 대한 술자의 고도의 기술이 요구되므로 이에 저자는 다양한 해부학적 변형에 대하여 연구할 필요성을 느껴 Sinus tympani와 facial recess를 중심으로 한국인 정상성인의 중이강후벽의 크기와 모양을 계측하였다. 연구대상은 측두골 35개 대상으로 능형융기 (pyramidal eminence) 안면신경, 등골 및 반규관등을 중심으로 주변부 구조의 계측을 시도하였다. 계측의 정확성과 정밀성을 높이기 위해 각각의 은밀한 부위에 Elastic impression material 인 PERMLASTIC$^{(R)}$ (type 1 Polysul_fide base class 2 Regular body)을 삽입한뒤 1 시간 경과 후 그 주위에 복잡한 구조가 양각된 주형물을 분리하여 계측을 실시하였다. 각부위와의 거리는 1/20mm까지 측정가능한 부척이 있는 척도계인 Matui$^{(R)}$ caliper를 사용하여 수술현미경하에서 시행하여 다음과 같은 결과를 얻었다. 1) 능형융기의 전부에서 Sinus tympani의 후부 및 Sinus tympani의 후부와 상부의 최대 신전 거리는 각각 2.54(1.05~5.40)mm, 3.22(1.25~7.45)mm, 0.67(0.40~l.75)mm 였다. 2) Sinus tympani는 상하경계가 난원창하부에서 정원창상부인 경우가 29예 (82.9 %)로 가장 많았다. 3 ) Sinus tympani의 후부는 심부(Deepest portion)가 ponticulus와 subiculum 사이인 경우가 22예(62.9 %)로 가장 많았다. 4) Facial recess의 침골와(Fossa incudis)로부터 하고실(hypotympanum)까지의 사선거리와 난원창과 정원창사이 중앙부에서의 횡선거리 및 침골와에서의 횡선거리는 각각 8.13 (7.90~9.55)mm 3.00 (2.85~3.45)mm 1,81 (1.40~2.15)mm 였다. 5) 안면신경관의 골결손 (bony dehiscence)은 5예 (14.3 %)에서 있었다. 6) 등골족판(footplate)의 전후거리 및 시상돌기(Cochleariform process)와 정원창까지의 거리는 각각 2.98(2.85~3.05)mm, 1.42 (1.35~l.55)mm, 1.85(1.45~2.10)mm 였다.

• 대한수의학회지
• /
• 제36권3호
• /
• pp.577-598
• /
• 1996

This study was conducted to identify the effects of caffeine or combinations of caffeine and iron or vitamin E on the lipid and protein components or blood chemistry levels of the serum as well as the total homogenate, mitochondrial and microsomal fraction of the rat(Sprague-Dawley, female) liver. Chronic test were conducted to determine those effects. The chronic test was conducted by dividing rats into 5 groups according to the type of drugs and dosages administrated as follows; the control(group A), and group B was given 25mg/kg caffeine orally once daily for 30 days, group C was given 50mg/kg caffeine orally once daily for 30 days, group D was given 25mg/kg caffeine and orally ferric chloride once daily for 30 days and group E was given 25mg/kg caffeine and 25mg/kg vitamin E once daily for 30 days. The concentrations of glucose, urea nitrogen, uric acid, creatinine, total protein, albumin, A/G ratio, triglyceride, total cholesterol, HDL-cholesterol, free fatty acid, phospholipid as well as the activities of alanine aminotransferase(ALT), aspartate aminotransferase(AST) and alkaline phosphatase(ALP) were measured in the serum of each experimental groups. The concentrations of the carbonyl group and malondiaidehyde(MDA) and the patterns of the SDS-PAGE(Sodium Dodecyl Sulfate - Polyacrylamide Gel Electrophoresis) and fatty acid compositions in free fatty acids and phospholipids were analyzed to determine the oxidative damages and metabolic changes on the lipid and protein components in the serum, and total homogenate, mitochondrial and microsomal fractions of the rat liver. The results obtained from this study were summarized as follows; 1. Body weights of groups B, C, D and E were significantly decreased(p < 0.01) in comparison with that of the control in the chronic test. 2. The concentrations of serum glucose in groups B(124.5mg/dl), C(130.1mg/dl), D(122.1mg/dl), E(119.3mg/dl) were significantly higher(p < 0.01) in comparison to that of the control(101.5mg/dl). But, there were no significant differences in the concentrations of urea nitrogen, uric acid, creatinine, total protein, albumin and A/G ratio in comparison to that of the control. 3. The concentrations of total cholesterol and HDL-cholesterol in serum of groups B(69.6, 53.4mg/dl), C(73.0, 56.3mg/dl), D(68.9, 51.1mg/dl) and E(68.2, 51.3mg/dl) were significantly higher(p < 0.01) in comparison to that of the control(52.6, 38.8mg/dl). On the other hand, the concentrations of triglyceride in serum of groups B(45.0mg/dl), C(40.4mg/dl), D(33.8mg/dl) and E(47.2mg/dl) were significantly lower(p < 0.01) in comparison to that of the control(66.2mg/dl). There were no significant differences in the activities of ALT, AST and ALP in comparison to that of the control. 4. The concentrations of free fatty acid and phospholipid in serum of groups B(45.7, 154.4mg/dl), C(50.0, 167.2mg/dl), D(52.5, 148.4mg/dl) and E(41.1, 159.2mg/dl) were higher(p < 0.01) in comparison to that of the control(35.2, 125.3mg/dl). And the concentrations of the carbonyl group and malondialdehyde in serum of group D(1.82, 0.52nM/mg protein) were significantly higher(p < 0.01) in comparison to the control(1.53nM/mg protein). 5. The concentrations of carbonyl group in total homogenate, mitochondrial and microsomal fraction of group D(1.45, 0.94, 1.67nM/mg protein) were significantly higher (p < 0.01) in comparison to the control(1.16, 0.66, 1.27nM/mg protein). And the concentrations of malondialdehyde in the total homogenate, mitochondrial and microsomal fraction of group D(6.70, 6.10, 1.36nM/mg protein) were significantly higher(p < 0.01) in comparison to the control(5.17, 3.64, 0.68nM/mg protein). 6. As the analytical results of the fatty acid compositions of free fatty acid in serum, the proportions of stearic acid and arachidonic acid of groups B(16.52, 12.62%), C(17.52, 15.18%), D(19.73, 13.47%) and E(17.62, 13.28%) were significantly higher(p < 0.01) in comparison to the control(14.75, 7.88%), but the proportions of oleic acid and linoleic acid of groups B(12.97, 32.59%), C(10.88, 31.23%), D(12.37, 30.66%) and E(11.95, 32.41%) were significantly lower(p < 0.01) in comparison to the control(16.44, 35.12%). Otherwise, as the results of the fatty acid compositions of phospholipid in serum, the proportions of stearic acid and arachidonic acid of groups B(39.37, 16.39%), C(40.63, 17.83%), D(42.73, 15.39%) and E(39.16, 15.70%) were significantly higher(p < 0.01) in comparison to the control(37.74, 14.24%), but the proportions of oleic acid and linoleic acid of groups B(4.03, 14.38%), C(3.54, 12.38%), D(4.52, 11.68%) and E(4.29, 13.64%) were significantly lower(p < 0.01) in comparison to the control(5.53, 16.14%). 7. As the analytical results of the fatty acid compositions of free fatty acid in total homogenate, mitochondrial and microsomal fraction of liver, the proportions of oleic acid of groups B(7.8**, 8.73**, 6.88%) and C(6.89**, 7.75**, 6.58%) were lower(**:p < 0.01) in comparison to the control(8.67, 10.08, 7.81%), but the proportions of arachidonic acid of group C(22.62, 19.79, 23.71%) were significantly higher(p < 0.01) in comparison to the control(20.93, 18.47, 22.24%). And the proportions of palmitic acid of group D(25.95**, 26.16, 26.34**%) were significantly higher(**:p < 0.01) in comparison to the control(24.43, 25.42, 23.34%). In addition, the proportions of linoleic acid of group D(23.43, 25.02, 23.95%) were also significantly higher(p < 0.01) in comparison to the control(22.17, 23.75, 21.26%). The proportions of stearic acid of group D(19.87, 19.76**%) in mitochondrial and microsomal fraction were lower(**:p < 0.01) in comparison to the control(21.01, 24.18%), and the proportions of stearic acid of group E(16.71*, 19.65**%) in mitochondrial and microsomal fraction were significantly lower(**:p < 0.01, *:p < 0.05) in comparison to the control(21.01, 24.18%), and the proportions of linoleic acid of group E(25.04, 29.20, 26.48%) in total homogenate, mitochondria and microsome were significantly higher(p < 0.01) in comparison to the control(22.17, 23.75, 21.26%). 8. As the results of the fatty acid compositions of phospholipid in total homogenate, mitochondrial and microsomal fraction of liver, the proportions of palmitic acid of group D(17.58**, 18.78*, 18.23%**) were significantly higher(**:p < 0.01, *:p < 0.05) in comparison to the control(16.28, 17.22, 16.38%), and the proportions of stearic acid of group D(36.41, 37.23, 39.53%) were also significantly higher(p < 0.01) in comparison to the control(34.18, 34.16, 36.04%). But the proportions of oleic acid(3.41*, 3.11**, 3.12**%) and linoleic acid (18.03**, 15.79**, 14.74**%) of group D were significantly lower(**:p < 0.01, *:p < 0.05) in comparison to the control(oleic : 3.63, 3.72, 3.79%, linoleic : 20.03, 18.71, 18.48%). 9. In order to determine the oxidative damages to the protein in serum, mitochondrial and microsomal fraction of the rat liver, the patterns of the SDS-PAGE were identified, but the results of SDS-PAGE were not significantly different between the control and experimental groups.

• 항공우주정책ㆍ법학회지
• /
• 제28권2호
• /
• pp.3-35
• /
• 2013

오늘날 항공운송은 국가 간 인적 물적 교류를 위한 최적화된 운송 수단이다. 우리나라는 물론 세계 각국은 효율적인 항공운송을 이용하기 위해 국제항공협정을 체결하여 항공사 노선확장과 운항횟수의 증가 등을 이룩하였지만 동전의 양면처럼 항공운송 사고의 발생가능성도 높아졌다. 항공운송 사고의 발생 빈도는 타교통수단 사고와 비교하였을 때 높지는 않아도 항공사고가 발생하면 대형 참사로 이어진다. 항공운송 사고는 국내 운송사고보다 국제 운송사고가 많으며, 사고가 발생하였을 경우에 항공운송인과 여객 또는 송하인 등의 법적 책임에 대한 분석이 필요하다. 항공운송 사고의 법적 규율에 대한 선순위 판단은 항공운송계약의 종류의 구분이다. 항공운송계약은 객체에 따라 항공여객운송계약과 항공물건운송계약으로 분별된다. 특히 항공여객운송 사고는 인명 피해를 발생시키기 때문에 이에 대한 법적 규율에 대한 논의가 더욱 필요하다. 개정 "상법" 항공운송편은 국제항공운송에서 세계적으로 활용되는 조약들의 내용을 우리 실정에 맞게 반영하여 국제적 기준에 맞으면서 체계상으로도 육상 해상 항공 운송을 포괄하는 특징을 갖고 있다. 그러나 "상법"은 운송계약상 항공운송인의 손해배상책임 문제를 규율하는 몬트리올협약을 주로 반영하면서 동 협약이 가지고 있던 문제로 인하여 국내 상황에 맞게 변형 및 생략을 통해 동 협약의 규정을 수용함으로 인해 발생하는 문제들도 생겨나게 되었다. 특히 여객 손해에 대한 손해배상책임의 발생 원인으로서 사고의 개념은 판례의 해석이 반영된 관련 조약과 "상법"에서 어느 정도 명확한 개념 정의가 필요하다고 할 것이다. "상법" 항공운송편의 모법인 몬트리올 협약은 여객의 사망 또는 신체상해의 원인이 된 사고가 '항공기상에서' 또는 '승강을 위한 작업 중' 발생한 경우에 항공운송인의 손해배상책임에 대하여 규정하고 있으며 이는 바르샤바 협약부터 이를 개정한 전 협약에 걸쳐 동일하게 규정되었고 '사고'의 개념 및 '승강을 위한 작업 중'의 범위와 관련하여 지금까지 논란이 계속되고 있는 중이다. 또한 손해배상의 대상 범주인 여객 손해 중 '신체상해'에 여객이 항공운송 중에 입은 정신적 손해를 포함시킬 수 있는지 여부를 두고 논쟁 중이다. 현행법상 신체적 상해의 경우 특정 상황에서 정신적 손해에 대한 배상이 가능하고 항공사고로 인한 발생한 정신적 손해는 중대한 신체적 상해와 같이 피해자로 하여금 정상적인 생활을 할 수 없게 할 만큼 심각한 피해이다. 그래서 여객의 정신적 손해는 관련 조약이나 "상법"상 신체적 상해에 포함하는 것으로 해석할 필요가 있으며 항공운송인의 합리적인 보호와 남소의 예방 측면에서 명백히 증명될 수 있는 정신적 손해만을 배상하여야 할 것이다. 연착 손해의 배상은 바르샤바 협약, 몬트리올 협약, "상법"은 여객 수하물 및 운송물의 연착으로 인한 항공운송인의 손해배상책임 규정은 있지만 연착에 대한 언급을 하고 있지 않기 때문에 연착에 대한 개념 정리가 필요하다. 연착의 개념에 대한 엄격한 해석은 항공운송인의 안전한 운항을 저해할 소지가 있으므로 여객 수하물 또는 운송물이 항공운송계약에 명시된 도착 예정인 공항에 합의된 시간 내에 또는 이러한 합의가 없을 경우 당해 상황을 고려해 선의의 운송인에게 요구할 수 있는 합리적인 시간 내에 도착 또는 인도되지 아니한 경우를 말한다와 같이 정의하는 것이 옳다고 생각한다. 항공사 약관의 손해는 여객 손해는 대한항공의 국제여객운송약관에 의하면 협약이나 기타 법령에서 정하는 경우 이외에 해당하는 항공운송이나 대한항공이 행하는 서비스로부터 여객에게 발생한 손해는 대한항공이 원칙적으로 책임을 부담하지 않고 대한 항공의 태만 또는 고의적인 과실에 기인하여 발생하였다는 사실이 증명되고 동 손해에 여객의 과실이 개재되지 않았다는 점이 판명된 경우에만 책임을 부담한다. 협약 또는 법령에서 정하지 않은 손해의 경우에는 항공사 측의 과실이 증명된 경우에만 책임을 부담한다는 조항인데 대한항공 약관상 '태만' 또는 '고의적인 과실'이라는 용어의 적합성에 대한 판단이 필요하며 중과실이라고 함이 타당하다고 생각된다. 수하물 손해는 대한항공 국제여객운송약관은 여객의 위탁수하물에 포함되어 있는 전자제품 등의 손상 또는 인도의 지연에 대하여 대한항공은 사실을 알고 있는지 여부에 관계없이 책임을 부담하지 않지만 미국을 출발 또는 도착하는 국제선 운송의 경우에는 그렇지 않다. 따라서 미국을 출발 또는 도착하는 국제선 여객을 다른 나라에 출발 또는 도착하는 국제선 여객을 불합리하게 차별하는 것으로 조약의 내용과 동일하게 물품에 대하여 항공사가 책임을 부담하는 방향으로 개정되어야 할 것이다.

• 사상체질의학회지
• /
• 제11권2호
• /
• pp.151-183
• /
• 1999

사상체질진단(四象體質診斷)에 있어 임상적(臨床的)으로 가장 많이 활용(活用)되며 또한 객관성(客觀性)이 인정(認定)되고 있는 방법(方法)으로는 설문지(設問紙)를 이용하는 방법(方法)이 있으며 그 중 대표적으로 사상변증내용(四象辨證內容) 설문조사지(設問調査紙)(I)과 사상체질분류조사지(四象體質分類調査紙)(QSCC II)가 있으나, 그 체질판정(體質判定)에 있어 각기 한쪽 체질(體質)로 치우치는 경향성(傾向性)을 보이므로 인(因)하여 임상가(臨床家)에서는 그 나름대로의 가치(價値)를 지니면서도 크게 일반화(一般化)되지 못하는 것이 현실(現實)이다. 본(本) 연구(硏究)는 사상체질진단(四象體質診斷)의 객관화(客觀化)를 위한 설문지(設問紙)의 연구(硏究)로써 동의대학교(東義大學校) 한의과대학(韓醫科大學) 부속한방병원(附屬韓方病院)에 내원(來院)한 자(者) 692명(名)(종합건강진단센터 대상자(對象者) 575명(名)과 환자(患者) 117명(名) 중 설문지(設問紙)(I)과 설문지(設問紙)(II)의 설문조사(設問調査) 결과(結果)와 사상체질전공의(四象體質專攻醫)의 체질판별(體質判別) 결과(結果)가 모두 치(致)하는 250명(名) 중(中)에서 설문지(設問紙) 내용(內容)이 비교적(比較的) 충실(充實)한 200명(名)을 대상(對象)으로 설문조사(設問調査) 내용(內容)을 통계분석(統計分析)하고 이를 토대(土臺)로 새로운 설문(設問)의 구성(構成)을 시도(試圖)하여 다음과 같은 결과(結果)를 얻게 되었다. 1. 설문지(設問紙)(I), 설문지(設問紙)(II)의 총(總) 192문항(問項)((설문지(設問紙)(I) 71문항(問項), 설문지(設問紙)(II) 121문항(問項))중에서 유의성(有意性)을 가지는 문항(問項)(P값이 최소(最小) 0.04 이상(以下))은 84문항(問項)(설문지(設問紙)(I)이 39문항(問項), 설문지(設問紙)(II)가 45문항(問項))이었다. 이중에서 서로 중복되는 항목(項目)이 22항목(項目)을 감안하연 설문지(設問紙)(I)과 설문지(設問紙)(II)의 총(總) 192문항(問項) 중(中) 체질(體質)에 따른 유의도(有意度) 검사(檢査)에 있어서 실질적(實質的)으로 유의(有意)있게 나타나는 문항(問項)은 총(總) 73문항(問項)이었다. P값이 0.001이하(以下)의 값을 보인 문항(問項)은 설문지(設問紙)(I)이 33문항(問項)이었으며, 설문지(設問紙)(II)의는 40문항(問項)으로 나타나 대체로 유의성(有意性)이 매우 높음을 알 수 있었다. 2. "설문지(設問紙)를 통한 사상체질(四象體質)의 임상적(臨床的) 분류방안(分類方案) 연구(硏究)"와 "체질진단분류(體質診斷分類)에 따른 질병(疾病) 및 증상유형(症狀類型)에 관한 임상적(臨床的) 연구(硏究)II"에서 유의성(有意性)이 입증(立證)된 설문문항(設問問項)을 몇 가지 추가(追加)하여 총(總) 851문항(問項)의 설문지(設問紙)를 구성(構成)하였다. 각(各) 문항(問項)들을 항목별(項目別)로 나누어 살펴보면, <체격(體格)과 체형(體型)>을 묻는 문항(問項)이 7개(個) 문항(問項)이었고, <외모(外貌)(안색(顔色))와 태도(態度)>를 묻는 문항(問項)이 7개(個) 문항(問項)이었고, <습관(習慣)과 성격(性格)>을 묻는 문항(問項)이 3개(個) 문항(問項)이었고, <생리(生理)-병리상태(病理狀態)>를 묻는 문항(問項)이 3개(個) 문항(問項)이었고, <평소(平素) 건강(健康)할 때 자주 느끼는 증상(症狀)>을 묻는 문항(問項)이 4개(個) 문항(問項)이었고, <식사습관(食事習慣)>을 묻는 문항(問項)이 3개(個) 문항(問項)이었으며, <평소(平素) 잘 나타나는 증세(症勢)>를 묻는 문항(問項)이 14개(個) 문항(問項)이었고, <일처리와 장단점(長短點)>을 묻는 문항(問項)이 6개(個) 문항(問項)이었고, <대인관계(對人關係)>에 대하여 묻는 문항(問項)이 7개(個) 문항(問項)이었고, <평소(平素)의 마음>에 대하여 묻는 문항(問項)이 5개(個) 문항(問項)이었고, <감정특성(感情特性)>에 대하여 묻는 문항(問項)이 1개(個) 문항(問項)이었고, <행동특성(行動特性)>에 대하여 묻는 문항(問項)이 10개(個) 문항(問項)이었고, <성격(性格)>에 대하여 묻는 문항(問項)이 15개(個) 문항(問項)이었다. 3. 문제지(設問紙)에서 소양인(少陽人)에 해당되는 항목(項目)은 84항목(項目)이었으며, 소음인(少陰人)에 해당되는 항목(項目)은 87항목(項目)이었으며, 태음인(太陰人)에 해당되는 항목(項目)은 70항목(項目)이었다. 또한 각(各) 설문항목(設問項目)의 유의성(有意性) 검사(檢査)에서 나타난 응답율(應答率)을 점수화(點數化)하여 가산점(加算點)을 부가(附加)한 후(後) 합산(合算)한 결과(結果) 소양인(少陽人) 항목(項目)의 점수(點數) 합계(合計)는 7785.04점(點)이었고, 소음인(少陰人) 항목(項目)의 점수(點數) 합계(合計)는 7742.80점(點)이었으며, 태음인(太陰人) 항목(項目)의 점수(點數) 합계(合計)는 7746.60점(點)이었다. 4. 새로운 설문지(設間紙)(III)의 유의성(有意性)은 임상환자(臨床患者) 75명(名)의 체질진단(體質診斷)에 있어 73.33%의 진단(診斷) 정확율(正確率)을 보이고 있으 나, 소음인(少陰人)과 태음인(太陰人)에 비하여 소양인(少陽人)의 판별율(判別率)이 다소 떨어지게 나타나고 있으며 태양인(太陽人)은 설문(設問)에서 제외(除外) 되었다.

• 한국균학회지
• /
• 제7권1호
• /
• pp.13-73
• /
• 1979

양송이 합성퇴비(合成堆肥) 배지(培地)의 제조(製造)에 있어서 탄소원(炭素原), 질소원(窒素源) 등(等) 영양원(營養源)과 물리적(物理的) 안정(安定)을 위(爲)한 보조재료(補助材料)의 선정(選定), 볏짚을 주재료(主材料)로 사용(使用)할 때의 퇴비재료(堆肥材料)의 배합(配合), 야외퇴적(野外堆積) 및 후발효(後醱酵), 볏짚 퇴비배지(堆肥倍地)에서의 유해생물(有害生物) 발생(發生) 및 방제(防除)에 관(關)한 연구(硏究)를 수행(遂行)한 바 그 결과(結果)를 요약(要約)하면 다음과 같다. 1. 합성퇴비배지(合成堆肥倍地)의 탄소원(炭素原)으로서 볏짚은 보리짚과 밀짚보다 발효(醱酵)가 신속(迅速)하고 퇴비(堆肥)의 질소함량(窒素含量)이 높으며 배지(培地)의 질(質)이 양호(良好)하여 양송이 자실체(字實體) 수량(收量)이 현저(顯著)히 높았다. 2. 한국(韓國)에서 생산(生産)되는 일본형(日本型) 벼와 통일품종(統一品種等) 두 계통(系統)의 볏짚은 초형(草型) 및 이화학적(理化學的) 성질(性質)이 달라서 퇴비(堆肥)의 발효상태(醱酵狀態)에 차이(差異)가 많았다. 통일(統一)볏짚은 발효(醱酵)가 빠르게 진행(進行)되므로 퇴적기간(堆積期間)을 단축(短縮)하고 수분공급량(水分供給量)을 감소(減少)시키며 물리성(物理成) 안정재(安定材)를 첨가(添加)하여야 한다. 3. 보릿짚 퇴비(堆肥)는 볏짚퇴비(堆肥)보다 생산성(生産性)이 낮으나 보릿짚과 볏짚을 50 : 50으로 혼용(混用)하면 볏짚과 대등(對等)한 수량(收量)을 얻을 수 있었다. 4. 퇴비배지(堆肥倍地)의 전질소(全窒素), 전유기물(全有機物) 질소(窒素) 및 Amino산태(酸態), Amide태(態) Amino당태(糖態) 질소(窒素)와 자실체(字實體) 수량간(收量間)에는 각각(各各) 높은 정(正)의 상관(相關)이 있으나 Ammonia태(態) 질소(窒素)는 균사생장 및 자실체(字實體) 형성(形成)에 심(甚)히 유해(有害)하였다. 5. 볏짚을 주재료(主材料)로 사용(使用)할 때 무기태(無機態) 질소원(窒素源)으로서 요소(尿素)가 가장 좋았고 유안(硫安)과 석회질소(石灰質素)는 부적당(不適當)하였다. 요소(尿素)는 3회(回) 분시(分施)할 때 손실(損失)이 감소(減少)되고 퇴비(堆肥)의 질소함량(窒素含量)이 증가(增加)하였다. 6. 유기태영양원(有機態營養源) 중(中) 들깻묵, 참깻묵, 밀기울, 계양(鷄養) 등(等)의 첨가(添加)는 퇴비(堆肥)의 발효(醱酵)를 양호(良好)하게 하고 자실체수량(字實體收量)을 증가(增加)시켰다. 7. 들깻묵, 밀기울 등(等) 유기태영양원(有機態營養源)은 장유박(醬油粕), 이분조미료폐비(泥粉調味料廢肥) 등(等) 공장폐엽물(工場廢葉物)로서 대체(代替)하여 재배(栽培)할 수 있었다. 8. 볏짚퇴비(堆肥) 제조시(製造時) 석고(石膏)와 Zeolite를 첨가(添加)하면 과습(過濕) 및 결착(結着) 등(等)으로 인(因)한 물리성(物理性)의 악화(惡化)가 방지(防止)되며, 자실체수량(字實體收量)이 증가(增加)하는데 그 효과(效果)는 일본형(日本型) 볏짚보다 통일(統一)에서 현저(顯著)하였다. 9. 볏짚을 주재료(主材料)로 퇴비재료(堆肥材料)를 배합(配合)할 때 계양(鷄養) 10%, 깻묵 5%, 요소(尿素) $1.2{\sim}1.5%$, 석고(石膏) 1%를 첨가(添加)하고 봄재배(栽培) 때는 발열촉진(發熱促進)을 위(爲)하여 미강(米糠)을 첨가(添加)하는 것이 좋았다. 10. 볏짚배지(培地)의 야외퇴적시(野外堆積時) 적산온도(積算溫度)와 퇴비(堆肥) 부열도간(腐熱度間)에는 r=0.97의 높은 상관(相關)이 이고 적산온도(積算溫度) $900{\sim}1000^{\circ}C$일 때 자실체(字實體) 수량(收量)이 가장 많았다. 11. 퇴적기간(堆積期間)이 길어질수록 퇴비(堆肥)의 부열도(腐熱度)가 높아지고 전질소함량(全窒素含量)이 증가(增加)하고 Ammonia태(態) 질소(窒素)는 감소(減少)하였는데, 볏짚배지(培地)의 퇴적기간(堆積期間)은 봄재배(栽培) $20{\sim}25$일(日), 가을재배(栽培) 15일(日)이 적당(適當)하였고 그때의 부열도(腐熱度)는 각각 19및 24%였다. 12. 퇴비(堆肥) 후발효시(後醱酵時) 수분함량(水分含量)이 높은 퇴비(堆肥)를 진압(鎭壓) 하여 입상(入床)할 때 공기유통(空氣流通)이 감소(減少)하여 Ammonia태(態) 질소(窒素)의 잔류량(殘溜量)이 증가(增加)하고 Methane과 유기산(有機酸) 등(等) 환원성(還元性) 물질(物質)의 생성(生成)이 많았다. r=-0.76, 휘발성(揮發性) 유기산(有機酸)과는 r=-0.73의 부(負)의 상관(相關)이 있었다. 13. 입상시(入床時) 퇴비(堆肥)의 수분함량(水分含量) $69{\sim}80%$ 범위(範圍)에서 자실체(字實體) 수량(收量)은 수분함량(水分含量)이 증가(增加)할수록 감소(減少)하였는데 (r=-0.78) 이것은 공극량(孔隙量)의 감소(減少)에 기인(基因)하는 것이었다. 입상시(入床時) 균상(菌床)의 적정 공극량(孔隙量)은 $41{\sim}45%$. 14. 후발효(後發效) 정열(頂熱)은 병해충 방제(防除) 뿐 아니고 Ammonia의 제거(除去)를 위(爲)해서 필수적(必須的) 과정(科程)이며 정열후(情熱後) 4일간(日間)의 발효(發效) 과정(科程)이 필요(必要)하였다. 15. 볏짚 퇴비배지(堆肥倍地)에서 양송이 균(菌)에 유해(有害)한 영향(影響)을 미치는 사장균 10종(種)이 동정(同定)되었는데 그 중(中) Diehliomyces microsporus, Trichoderma spp.,Stysanus stemoitis 등(等)은 발생빈도(發生頻度)가 높고 피해(被害)가 심(甚)하였다. 16. Diehliomyces는 재배사(栽培舍) 온도조절(溫度調節), Basamid와 Vapam처리(處理)로서 방제(防除)가 가능(可能)하며 Trichoderma spp.는 Bavistin과 Benomyl 철포(撤布)로서 방제(防除)되었다. 17. 퇴비중(堆肥中) 서식(棲息)하여 양송이를 가해(加害)하는 4종(種)의 선충과 5종(種)의 응애(類)는 퇴비(堆肥)를 $60^{\circ}C$에서 6시간(時間) 정열(頂熱)시키므로서 방제(防除)할 수 있었다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.