• 대한가정학회지
• /
• 제35권4호
• /
• pp.79-94
• /
• 1997

This study was performed to develop a basic stacks pattern for middle-aged women reflecting the characteristics of their lower body types. Anthropometric measurements using sliding guage method were carried out for 4 women 40's For the analysis of the lower body types horizontal and vertical section maps obtained by sliding gauge method and 2 indices were produced. Based on the slacks construction components produced by the drafts of their lower body surface experimental slacks pattern was designed. Multiple comparison test was used to compare 3 existing slacks patterns with the experimental pattern. 1. The results of the body section map analysis were as follows: 1) In the frontal view silhouette of vertical section maps there were less individual differences in items with skeleton landmarks than those without them. 2) In the shape of horizontal section maps waist section represented more round shape than the others and thigh maximum width section had the flattest shape. Flat ratios(depth/width) of subjects were much higer than those of young women which clarified the change of depth was bigger than that of width with aging process. 2. The slacks construction components for pattern drafting were as follows: 1)Ease amount of waist was 0.5cm and front and back waist girth difference was 1.2cm Ease amount of hip was 1,8cm and front and back hip girth difference was 0.7 cm 2) The amount of dart intake incresed in the order of side(4cm) back(3,6cm) from (2.8cm) The length of dart leg incresed in the order of front side back.

• 한국운동역학회지
• /
• 제14권1호
• /
• pp.65-81
• /
• 2004

The purposes of this study were to determine the functions of actions of the limbs during each of the three support phases of the triple jump and their relationships with the performance of the triple jump. Four elite male triple jumpers were participated as subjects. The Pearson product moment correlation coefficient were used to determine and compare the relationships between the change in each component of the normalized angular momentum of the whole body about center of gravity and the actions of the extremities during different support phases. A level of significance at $\alpha$=.05 was set. After analyzing the angular momentum and correlation during support phase of the hop, step, and jump, the following findings are obtained: The actions of the arms created a side-somersaulting angular momentum about the whole body center of gravity toward the side of the free leg during the support phase of the step, and a somersaulting angular momentum about the whole body center of gravity during each support phase. The action of the free leg created a somersaulting angular momentum about the whole body center of gravity during the support phases of the hop and step.

• 제어로봇시스템학회논문지
• /
• 제8권2호
• /
• pp.142-150
• /
• 2002

This paper presents a systematic method of the zigzag gait planning for quadruped walking robots. When a robot walks with a zigzag gait, its body is allowed to move from side to side, while the body movement is restricted along a moving direction in conventional continuous gaits. The zigzag movement of the body is effective to improve the gait stability margin. To plan a zigzag gait in a systematic way, the relationship between the center of gravity(COG) and the stability margin is firstly investigated. Then, new geometrical method is introduced to plan a sequence of the body movement which guarantees a maximum stability margin as well as monotonicity along a moving direction. Finally, an optimal swing-leg sequence is chosen for a given arbitrary configuration of the robot. To verify the proposed method, computer simulations have been performed for both cases of a periodic gait and a non-periodic gait.

• 제어로봇시스템학회논문지
• /
• 제10권8호
• /
• pp.703-710
• /
• 2004

This paper presents discontinuous zigzag gait analysis for a newly modeled quadruped walking robot with an articulated spine which connects the front and rear parts of the body. An articulated spine walking robot can move easily from side to side, which is an important feature to guarantee a larger gait stability margin than that of a conventional single rigid-body walking robot. First, we suggest a kinematic modeling of an articulated spine robot which has new parameters such as a waist-joint angle, a rotate angle of a front and rear body and describe characteristics of gait using an articulated spine. Next, we compared the difference of walking motion of newly modeled robot with that of a single rigid-body robot and analyzed the gait of an articulated spine robot using new parameters. On the basis of above result, we proposed a best walking motion with maximum stability margin. To show the effectiveness of proposed gait planning by simulation, firstly the fastest walking motion is identified based on the maximum stride, because the longer the stride, the faster the walking speed. Next, the gait stability margin variation of an articulated spine robot is compared according to the allowable waist-joint angle.

• 한국해양환경ㆍ에너지학회지
• /
• 제13권2호
• /
• pp.83-90
• /
• 2010

해양파 중에서 2개 선체가 가까운 거리에 계류되어있는 경우에 2선체의 운동을 엄밀한 파 중 2 부유체 운동이론에 의하여 계산하였다. 2 선체의 방사 및 산란파 포텐셜은 특이파 수 현상이 없는 주파수영역 Improved Green 적분방 정식으로부터 구하였다. 규칙파 중에서 근접한 2선체가 서로 연결되지 않은 경우와 강체 연결장치로 병렬 계류된 된 경우의 운동 및 강체연결체에 작용하는 6방향 힘과 모오멘트를 해석하는 기법과 수치실험 결과도 보였다.

• 한국수산과학회지
• /
• 제47권5호
• /
• pp.588-596
• /
• 2014

To examine the influences of water temperature and stocking density on feeding, growth and blind-side hypermelanosis of the starry flounder Platichthys stellatus, we performed an experiment with fry at two densities: 2 and 8 fish/L. The fry had a total length of $3.2{\pm}0.1cm$, body weight $0.6{\pm}0.1g$, and pigmented patches (pigmented ratio $2.6{\pm}0.4%$) on the blind side. Duplicate experiments were conducted in 93.7 L glass tanks for 120 days, from July to November. We determined daily food intake (DFI), food efficiency (FE), growth, survival rate, ratio of hypermelanic fish, and pigmented area rate on the blind side at 60-day intervals. The DFI was less than 50 mg/fish/day, and growth was delayed from July to September (water temperature [WT]> $20^{\circ}C$). After October, when WT < $20^{\circ}C$, the DFI increased significantly and the growth was accelerated, suggesting that the rearing temperature of starry flounder in artificial facilities should be < $20^{\circ}C$. While the FE, and survival did no differ between the two density groups, DFI and growth were significantly higher at 2 fish/L than at 8 fish/L. There was no difference in the pigmented area ratio between the two density groups. Although the hypermelanosis was not correlated with body size, the malpigmentation increased with growth. These results suggest that a high stocking density is not the main cause of blind-side hypermelanosis, although it can accelerate hypermelanosis in the starry flounder.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1709-1712
• /
• 2008

The trunk is inclined to the loaded side when carrying an object as one of activities of daily living. As the reaction to this behavior the human body may be inclined to his/her trunk to unloaded side. The present study investigated the biomechanical effects of weight variation for sided load carriage during walking upon joint moments and muscle torques, through the tracker agent and joint driving dynamic analysis. To perform the experiment one male was selected as subject for the study. Gait analysis was performed by using a 3D motion analysis system. Thirty nine 14mm reflective markers, according to the plug-in marker set, were attached to the subject. We used BRG.LifeMOD(Biomechanics Research Group, Inc., USA), for skeletal modeling and inverse and joint driving dynamic simulation during one gait cycle. In walking with a sided load carriage, the subject modeled held the carriage with the right hand, which weighed 0, 5, 10, 15kg, 20kg respectively. The result of this simulation showed that knee and hip in the coronal plane were inclined to the loaded side and loaded side had larger moments as the sided load carriage was increased. On the other hand thoracic and lumbar in the coronal plane had larger negative values as the sided loaded carriage was increased. The thoracic and lumbar in the transverse plane also had larger values as the sided load was increased. And the several muscles of loaded side were increased as increasing sided load. It could be concluded that human body is adopted to side loaded circumstances by showing more biologic force. These results could be very useful in analysis for delivery motion of daily life.

• 대한치과교정학회지
• /
• 제41권6호
• /
• pp.431-439
• /
• 2011

Objective: To determine whether there is any difference between the cleft and non-cleft sides of the mandible in unilateral cleft lip and palate (UCLP) patients, or the right and left sides in control patients; and to determine if there is any difference between the mandibular asymmetry of UCLP patients and that of control patients. Methods: We examined cone-beam computed tomography (CBCT) scans of 15 patients with UCLP and 15 age- and gender-matched control patients. We evaluated 8 linear, 3 surface, and 3 volumetric measurements and compared the cleft/non-cleft sides of UCLP patients and the right/left sides of controls. Results: There were no statistically significant gender differences in any linear, surface, or volumetric measurement. The single significant side-to-side difference in UCLP patients was a longer coronoid unit on the cleft side than on the non-cleft side ($p$ = 0.046). Body volume was significantly lower in the UCLP group than in the control group ($p$ = 0.008). Conclusions: In general, UCLP patients have symmetrical mandibles, although the coronoid unit length is significantly longer on the cleft side than on the non-cleft side. UCLP patients and controls differed only in body volume.

• 동의생리병리학회지
• /
• 제25권5호
• /
• pp.790-798
• /
• 2011

'Mu-acupuncture treatment(繆刺法)' and 'Geo-acupuncture treatment(巨刺法)' are the ways of taking acupuncture points on the sound side of a human body and not on the unsound side of a human body to treat disease, 'Mu-acupuncture treatment(繆刺法)' is applicable to 'Transverse meridian disease(絡脈病)', 'Geo-acupuncture treatment(巨刺法)' is applicable to 'Longitudinal meridian disease(經脈病)'. To diagnose a disease as transverse meridian disease or longitudinal meridian disease depends on 'Feeling pulse at the nine spots of three parts on a body for diagnosis (三部九候診)'. 'Mu-acupuncture treatment(繆刺法)' takes a 'Rak-acupuncture point(絡穴)' under a wrist and a ankle joint. The method of taking it, two ways, are 'Yu(痏)' and 'The treatment getting some blood(出血療法)'. 'Yu(?)' which is similar to 'Quick-getting acupuncture into and out (單刺法)' means the number of times doing acupuncture and is different from 'The treatment getting some blood (出血療法)' which is typically considered as 'Yu(?)'. Meanwhile, judging from the changes of the methods of feeling pulse for diagnosis and the symptoms of a certain disease, though it is a precondition that 'Biased-Gi(邪氣)' stays at 'The Large transverse meridian(大絡)' in 'The theory of Mu-acupuncture treatment(繆刺論)', it is hard to consider the symptoms of 'Transverse meridian disease(絡脈病)' described in 'The theory of Mu-acupuncture treatment(繆刺論)' as the pure symptoms of 'Transverse meridian disease(絡脈病)'.

• 패션비즈니스
• /
• 제22권4호
• /
• pp.30-46
• /
• 2018

The purpose of the study was to suggest certain measurements of the skirt block pattern drafting process for the Korean female fashion models, with the aim to improve its fit. For this purpose, the study carried out an analysis of the lower body features of a dress form developed for the study. This form was representative of Korean female fashion models' body features. The study performed a cross-sectional analysis at waist and hip levels and measured the angles from the frontal and lateral silhouettes of the dress forms. The comparisons of the skirt block patterns developed through draping by the use of 2 types of the dress forms developed and existed and through drafting according to the current patternmaking method have led to noticeable findings in terms of implementation of the skirt block drafting process for the Korean female fashion models. The results of the study are as follows: (1) the vertical lengths between the levels at the front waist point and the side waist point in the patterns are 0.7cm; (2) the vertical length between the levels at the front waist point and the back waist point in the back panel is 0.7cm; (3) the horizontal lengths between the perpendicular line from the side hip point and the side waist point in patterns are within a range of 2.0 to 2.2cm; (4) the horizontal length between the original and the adjusted back waist points moved into the waist line, in a range of 0.0 to 1.0cm, differs whether the center back line would be folded or sewn.