• Korean Journal of Applied Biomechanics
• /
• v.17 no.1
• /
• pp.191-199
• /
• 2007

This study was conducted to examine the biomechanical characteristics of open spike in the volleyball to improve the technique of the volleyball spike. The subjects were six male college and high school athletes. The motions of volleyball spike were filmed by using two Sony VX 2000 Video Cameras. The mechanical factors were angle and angular velocity of body segments in the upper and the lower limbs. The conclusions were as follows; 1. The angle of the shoulder joint of the skilled showed larger than that of the unskilled in impacting of the volley ball spike. 2. The angle of the elbow joint of the skilled showed larger than that of the unskilled in impacting of the volley ball spike. 3. The angle of the wrist joint of the skilled showed smaller than that of the unskilled in impacting of the volley ball spike. 4. The angle of the hip joint of skilled showed larger than that of unskilled in impacting of the volley ball spike. 5. The angle of the knee joint of the skilled and the unskilled showed same in take off and impacting of the volley ball spike, and that of the skilled showed smaller than that of the unskilled in take-off touchdown and touchdown after impact of the volley ball spike. 6. The angle of the ankle joint of skilled showed larger than unskilled in take-off of the volley ball spike. 7. The angular velocity of the shoulder joint, elbow joint, wrist joint of the skilled showed faster than that of the unskilled in impacting of the volley ball spike. Taken together the result of them, I have come to conclusion that knee joint angle in touchdown of the take off should be decreased and knee joint angle in take off should be increased, and then stability of the take off should be made and, and that extension of the elbow joint should be made and wrist joint angle decreased and shoulder and hip joint angle increased, and then C.O.G of the arm and hand should be positioned ahead C.O.G of the body in impacting for effective impact of the spike, and that the transfer of the angular velocity of body segments for effective impact of the spike make from the proximal segment to the distal segment at spike in volleyball.

• Korean Journal of Applied Biomechanics
• /
• v.21 no.3
• /
• pp.297-308
• /
• 2011

The purpose of this study was to investigate the relationship among isometric and isokinetic muscle strength, lean body mass(LBM) and bone mineral density(BMD) in the elderly. Eleven males(age, 70.27${\pm}$5.78yr; height, 167.36${\pm}$6.68 cm; weight, 68.34${\pm}$8.23 kg) and thirteen female(age, 69.77${\pm}$4.13yr; height, 152.80${\pm}$4.45 cm; weight, 56.86${\pm}$7.40 kg) participated in this study. In all subjects, LBM and BMD segments was measured by using Dual-energy x-ray absorptiometry(DEXA, Lunar DPS-DM, U.S.A.). Maximum isometric and isokinetic muscle strength of flexion and extension at the knee and elbow, ankle, trunk joints were measured by using an isokinetic dynamometer(CON-TREX(R) Multi Joint Testing Module, Switzerland). The results of this study showed that isometric and isokinetic muscle strength was significantly higher in extension than flexion. In the male and female, hamstring to quadriceps strength ratio(H:Q ratio) was increased as contraction velocity increased. BMD was correlated significantly with trunk extension in the male, but not in the female. LBM was correlated significantly in the male and female with knee extension strength. This study suggests that in the elderly muscle strength training program should put more weight on extensor muscles of the body.

• Journal of Korean Neurosurgical Society
• /
• v.42 no.4
• /
• pp.271-275
• /
• 2007

Objective : Although a significant correction of local kyphosis has been reported previously, only a few studies have investigated whether this correction leads to an improved overall sagittal alignment. The study objective was to determine whether an improvement in the local kyphotic angle improves the overall sagittal alignment. We examined and compared the effects of thoracic and lumbar level kyphoplasty procedures on local versus overall sagittal alignment of the spine. Methods : Thirty-eight patients with osteoporotic vertebral compression fractures who showed poor response to conventional, palliative medical therapy underwent single-level kyphoplasty. The pertinent clinical data of these patients, from June 2006 to November 2006, were reviewed retrospectively. We measured preoperative and postoperative vertebral body heights, which were classified as anterior, middle, or posterior fractured vertebral body heights. Furthermore, the local and overall sagittal angles after polymethylmethacrylate deposition were measured. Results : More height was gained at the thoracic level, and the middle vertebral height regained the most. A significant local kyphosis correction was observed at the fractured level, and the correction at larger spanning segments decreased with the distance from the fractured level. Conclusion : The inflatable balloon kyphoplasty procedure was the most effective in regaining the height of the thoracic fractured vertebra in the middle vertebral body. The kyphosis correction by kyphoplasty was mainly achieved in the fractured vertebral body. Sagittal angular correction decreased with an increase in the distance from the fractured vertebra. No significant improvement was observed in the overall sagittal alignment after kyphoplasty. Further studies in a larger population are required to clarify this issue.

• Korean Journal of Computational Design and Engineering
• /
• v.17 no.5
• /
• pp.324-332
• /
• 2012

In this paper, a method for calculating the contact force and the frictional force caused by contacts between the wire rope and the rigid body is introduced based on multibody dynamics. And the method is applied to a simulation of contacts between the wire rope and the shell plate of a block that can occur during shipbuilding. The wire rope is composed of a number of lumped masses and the wire rope segments that connect the masses. After calculating the position of interference, we inserted a contact node into the wire rope. We then derived the equations of motion of the wire rope and the rigid body using augmented formulation based on multibody dynamics taking into account the constraints between the contact node and the rigid body. Using the equations, we were able to obtain the constraint force between the contact node and the rigid body, and calculate the contact force and the frictional force, based on which the position of the contact node was corrected. Finally, we applied our results to perform simulation of contacts between the wire rope and the shell plate of a block in order to verify the efficacy of the method proposed in this paper.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.8
• /
• pp.2101-2112
• /
• 1994

A two-dimensional biomechanical model was developed in order to calculated the lower extremity kinematics and kinetics during level walking. This model consists of three segments : the thigh, calf, and foot. Each segment was assumed to be a rigid body ; its motion to be planar in the sagittal plane. Five young males were involved in the gait experiment and their anthropometric data were measured for the calculation of segmental masses and moments of inertial. Six markers were used to obtain the kinematic data of the right lower extremity for at least three trials of walking at 1.0m/s, and simultaneously a Kistler force plate was used to obtain the foot-floor reaction data. Based on the experimental data acquired for the stance phase of the right foot, calculated vertical joint forces reached up to 0.91, 1.05, and 1.11 BW(body weight) at the hip, the knee, the ankle joints, respectively. The flexion-extension moments reached up to 69.7, 52.3, and 98.8 Nm in magnitude at the corresponding three joints. It was found that the calculated joint loadings of a subject were statistically the same for all his three trials, but not the same for all five subjects involved in the gait study.

• Korean Journal of Applied Biomechanics
• /
• v.20 no.1
• /
• pp.49-55
• /
• 2010

The purpose of the study was to analyze kinetic factors required to the three-point jump shot of the basketball games through 3-D analysis and ground reaction force(GRF) analysis. Six university male players participated in this study. The results of the study were showed that (1) resultant velocity in the center of mass(COM) was $0.84{\pm}0.27\;m/s$ since a player didn't shot a ball in the highest peak and shot ball at the moment of going up forward and vertical movement. Therefore, it is necessary to find a proper timing to shot a ball; (2) the angular velocity was largely increased in upper arm and fore arm out of the upper-limb segments and the hands had the largest angular velocity since the body is in a fixed situation and angular speed is rapidly increased by the wrist' snap with the rapid movement of upper arm and forearm at the time of release a ball; (3) it is judged that a player can shot a ball at the accurate and high release point when the player collects power vertically to the maximum by keeping GRF to the right and the rear in a proper way and by keeping the body's balance so that a large power may not be dispersed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.6 s.177
• /
• pp.1479-1490
• /
• 2000

The design process of the motor driven tilt/telescopic steering column is established by axiomatic design approach in conceptual design stage. By selecting independent design variables for improvin g performance of the steering system, each detailed design can be carried out independently. In the detailed design, the safety in crash environment and vibration reduction are considered. An occupant analysis code SAFE(Safety Analysis For occupant crash Environment) is utilized to simulate the body block test. Segments, contact ellipsoids and spring-damper elements are used to model the steering column in SAFE. The model is verified by the result of the body block test. After the model is validated, the energy absorbing components are designed using an orthogonal array. Occupant analyses are performed for the cases of the orthogonal array. Final design is determined for the minimum occupant injury. For vibrational analysis, a finite element model of the steering column is defined for the modal analysis. The model is validated by the vibration experiment. Size and shape variables are selected for the optimization process. An optimization is conducted to minimize the weight subjected to various constraints.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.6
• /
• pp.144-155
• /
• 1999

An occupant analysis code SAFE (Safety Analysis For occupant crash Environment) is utilized to simulate and improve the crash performance of an energy absorbing steering system. The safety standard FMVSS 203 is simulated and used for design evaluations . Segments and contact elliposids are utilized to model the bod blocks and the components of the steering system with SAFE. Spring-damper elements and force-deflection characteristics are utilized to model the energy absorbing components such as the plate and the polyacetal molding. The plate absorbs the impact energy through tensile deformation . Whereas, the polyacetal molding absorbs the impact energy through compression. the body block test is carried out to validate tie simulation model, and real component tests are performed to extract the force-deflection curves . After the model is validated , the parameter study is carried out to evaluate the crash performance of the energy absorbing components. A performance measure is defined for the parameter study. Using the results of the parameter study and managing the orthogonal arrays, optimum design values of energy absorbing components are determined to minize the occupant injury.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.27 no.5
• /
• pp.482-487
• /
• 2005

Amelobalstic fibroma is a rare true mixed tumor of odontogenic origin with both mesenchymal and ectodermal components. It usually appears in the mandible and in the posterior segments of young patients without gender predilection, and sometimes is associated with an impacted tooth. It is a benign slow growing tumor that is less infiltrative than an ameloblastoma but tends to expand bone. Surgical treatment with excision followed by curettage seems to be the most appropriate therapeutic option. The objective of this presentation is to report a case of ameloblastic fibroma of the mandible body in a 14-year-old woman, to make a brief review of the literature about its differential diagnosis and its clinical and histologic features and the treatment.

• Ecology and Resilient Infrastructure
• /
• v.2 no.3
• /
• pp.247-254
• /
• 2015

Changes in land-use type can affect soil and water properties in stream ecosystems. This study examined the effects of different land-use types on biogeochemical properties and microbial activities of a stream. We collected water and sediment samples in a stream at three different sites surrounded by varying land-use types; a forest, a radish field and a rice paddy. Nitrogen contents, such as nitrate, nitrite and total nitrogen in the stream water body, showed significant differences among the sampling sites. The highest nitrogen values were recorded at the site surrounded by cropland, as fertilizer runoff impacted the stream. Soil organic matter content in the sediment showed significant differences among sites, with the highest content exhibited at the forest mouth site. These differences might be due to the organic matter in surrounding terrestrial ecosystems. Microbial activities determined by extracellular enzyme activities showed similar values throughout all sites in the water body; however, the activities in the sediments exhibited the highest values near the forest site and mirrored the soil organic matter content values. From these results, we conclude that different land-use types are important factors affecting water and sediment properties in stream ecosystems.