• Title/Summary/Keyword: Body interference

Search Result 174, Processing Time 0.029 seconds

EFFECTS OF DIETARY SILICIC ACID AND CADMIUM ON SHORT-TERM MINERAL BALANCES IN SHEEP

  • Bruce, L.B.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제2권4호
    • /
    • pp.579-582
    • /
    • 1989
  • Previous experiments have shown that aqueous sodium silicate ingested in drinking water may modify the gastrointestinal uptake and(or) tissue retention of certain trace elements, including heavy metals. The present experiment tested, with a mineral balance trial using sheep, the hypothesis that dietary silicic acid could modify uptake, retention and(or) biological effects of dietary Cd. Twenty-four wethers were fed a fibrous diet of ground alfalfa hay and cottonseed hulls to which either 0 or 150 ppm Cd was added as $CdCl_2$ and 0, .5 or 1% silicic acid (as dry matter of the diet). Body weight, feed intake, excretion of urine (volume) and feces (weight), digestibility of dry and organic matter, retention of nitrogen, and packed cell volumes of blood were not affected by either Cd or silicic acid (P<.10). Cadmium decreased (P<.05) Ca retention and increased (P<.01) Mg retention. Silicic acid decreased (P<.05) K retention. Silicic acid failed (P<.01) to modify the retention of added dietary Cd. Body retention of K, Mn and Ni in response to silicic acid varied with Cd levels. If Cd is interfering with mineral retention, silicic acid may be effective in preventing this interference.

THE INFLUENCE OF COPPER ON THE TOTAL SULPHUR AMINO ACIDS REQUIREMENT OF BROILERS DURING TWO GROWING PERIODS

  • Kassim, H.;Suwanpradit, S.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제9권4호
    • /
    • pp.359-362
    • /
    • 1996
  • A study was conducted to assess the influence of copper on the total sulphur amino acid requirements of broiler chickens reared under two growing periods. The TSAA levels used were 0.73, 0.83, 0.93% with copper levels of 0, 125, 250 and 375 mg/kg for the starter period and the TSAA levels of 0.72, 0.79 and 0.86% with copper levels of 0, 125, 250 and 375 mg/kg for the grower period. Total feed consumption, body weight gain and feed L gain ratio were used as the parameters for the assessment. The results showed that adding copper at 250 mg/kg to the diets improved feed : gain ratio of the starter broilers and resulted in small improvement of body weight gain and feed : gain ratio of the grower broilers. Growth was depressed in relation to the reduction of feed intake on the chicks fed diet containing 375 mg/kg copper. There was a significant interaction between dietary TSAA and copper levels for feed intake, hence, indicating that the supplementation of copper at the level of 375 mg/kg increased the TSAA requirement of the starter broilers, although no interference with the requirement of grower broilers.

6축 힘/모멘트센서를 가진 인간형 로봇의 지능형 발 개발 (Development of Humanoid Robot's Intelligent Foot with Six-axis Force/Moment Sensors)

  • 김갑순;김현민;윤정원
    • 한국정밀공학회지
    • /
    • 제26권5호
    • /
    • pp.96-103
    • /
    • 2009
  • This paper describes a humanoid robot's intelligent foot with two six-axis force/moment sensors. The developed humanoid robots didn't get the intelligent feet for walking on uneven surface safely. In order to walk on uneven surface safely, the robot should measure the reaction forces and moments applied on the sales of the feet, and they should be controlled with the measured the forces and moments. In this paper, an intelligent foot for a humanoid robot was developed. First, the body of foot was designed to be rotated the toe and the heel to all directions, second, the six-axis force/moment sensors were manufactured, third, the high-speed controller was manufactured using DSP(digital signal processor), fourth, the humanoid robot's intelligent foot was manufactured using the body of foot, two six-axis force/moment sensors and the high-speed controller, finally, the characteristic test of the intelligent foot was carried out. It is thought that the foot could be used for a humanoid robot.

초고압 직류 가공 송전선로에서 발생되는 이온 계측시스템 개발 (The Development of System for Measuring Ion Generated from HVDC Overhead Transmission Line)

  • 주문노;양광호;이동일;신구용;임재섭
    • 전기학회논문지
    • /
    • 제57권11호
    • /
    • pp.2035-2040
    • /
    • 2008
  • The electrical discharge of high voltage direct current(HVDC) overhead transmission line generate audible noise, radio noise, electric field, ion current and induced voltage on the ground. These items are major factors to design environmentally friendly configuration of DC transmission line. Therefore, HVDC transmission lines must be designed to keep all these corona effects within acceptable levels. Several techniques have been used to assess interference caused by ions on HVDC overhead transmission line. In this study, to assess the ion characteristic of DC line, the ion current density and induced voltage caused by ion flow were measured by plate electrodes manufactured from a metal flat board and charged bodies, respectively. The charged body has two types of cylinder and cylindrical plate. From the results of calibration experiments, the sensitivity of flat electrode and charged body can be obtained. At present, the developed system is used to investigate the ion generation characteristics of Kochang DC ${\pm}500kV$ test line.

내접 기어를 이용한 프리텐셔너의 구동 메커니즘 개발 (Development of Operating Mechanism of a Pretensioner using Internal Gear Pairs)

  • 정성필;박태원;김욱현;홍요선
    • 한국정밀공학회지
    • /
    • 제27권3호
    • /
    • pp.89-94
    • /
    • 2010
  • The pretensioner is used to retract the belt webbing and tighten up any slack in the event of a crash. The retracting force of the pretensioner helps move the passenger into the optimum crash position in his or her seat. In this paper, the new concept of an operating mechanism of the pretensioning system is presented. The internal gear design program is developed using MATLAB. Two kinds of numerical analysis model are created. The first one, the rigid body dynamic model, is used to estimate the performance of several gear pairs. The initial performance of the new operating mechanism is analyzed and the best combination of the gear pairs is selected. The second one, the structural dynamic model, is used to calculate the deformation of the gear teeth. To decrease the deformation and interference of the teeth, the shape of the gear pairs is changed.

렙틴 저항성의 개선 (Improvement of Leptin Resistance)

  • 김용운
    • Journal of Yeungnam Medical Science
    • /
    • 제30권1호
    • /
    • pp.4-9
    • /
    • 2013
  • Leptin, a 16-kDa cytokine, is secreted by adipose tissue in response to the surplus of fat store. Thereby, the brain is informed about the body's energy status. In the hypothalamus, leptin triggers specific neuronal subpopulations (e.g., POMC and NPY neurons) and activates several intracellular signaling events, including the JAK/STAT, MAPK, PI3K, and mTOR pathway, which eventually translates into decreased food intake and increased energy expenditure. Leptin signal is inhibited by a feedback inhibitory pathway mediated by SOCS3. PTP1B involves another inhibitory pathway of leptin. Leptin potently promotes fat mass loss and body weight reduction in lean subjects. However, it is not widely used in the clinical field because of leptin resistance, which is a common feature of obesity characterized by hyperleptinemia and the failure of exogenous leptin administration to provide therapeutic benefit in rodents and humans. The potential mechanisms of leptin resistance include the following: 1) increases in circulating leptin-binding proteins, 2) reduced transport of leptin across the blood-brain barrier, 3) decreased leptin receptor-B (LRB), and/or 4) the provocation of processes that diminish cellular leptin signaling (inflammation, endoplasmic reticulum stress, feedback inhibition, etc.). Thus, interference of the cellular mechanisms that attenuate leptin signaling improves leptin action in cells and animal models, suggesting the potential utility of these processes as points of therapeutic intervention. Various experimental trials and compounds that improve leptin resistance are introduced in this paper.

A new free-living marine nematode species of the genus Belbolla (Enoplida, Enchelidiidae) from a subtidal zone of the East Sea, Korea, with some ecological and biogeographical information

  • Rho, Hyun Soo;Lee, Heegab;Lee, Hyo Jin;Min, Wongi
    • 환경생물
    • /
    • 제38권4호
    • /
    • pp.578-585
    • /
    • 2020
  • A new free-living marine nematode species of the genus Belbolla Andrássy, 1973 belonging to the family Enchelidiidae is described based on specimens collected from the sediment of a subtidal benthic environmental habitat in the East Sea, Korea. Belbolla wonkimi sp. nov. differs from its congeners by the combination of the following characteristics: a relatively long body (3263-3396 ㎛), the absence of ocelli, nine oesophageal bulbs in the posterior pharynx, well-developed two winged precloacal supplements, longer spicule length(115-130㎛, 1.6-1.8 anal body diameter long), and a triangle-shaped shorter gubernacular apophysis (17-18 ㎛). Comparative tables on the biogeographical and morphological characteristics of Belbolla species are presented. A DIC (differential interference contrast) photomicrograph of the new species is also provided. This is the first taxonomic report on the genus Belbolla from Korean waters.

A new free-living marine nematode species of the genus Pseudosteineria (Monhysterida: Xyalidae) from a subtidal zone of the East Sea, Korea

  • Hyo Jin Lee;Heegab Lee;Hyun Soo Rho
    • 환경생물
    • /
    • 제39권4호
    • /
    • pp.507-514
    • /
    • 2021
  • A new free-living marine nematode species of the genus Pseudosteineria Wieser, 1956 affiliated with the family Xyalidae is described based on specimens collected from the sediment of a subtidal benthic environmental habitat in the East Sea, Korea. Pseudosteineria varisetis sp. nov differed from its congeners by the combination of the following characteristics: a relatively long body (1,628-1,691 ㎛ long in males), a circular amphideal fovea situated behind the subcephalic setae, the presence of lateral cuticular alae starting from behind the nerve ring, the presence of eight groups of long subcephalic setae, the presence of irregularly distributed variable lengths of somatic setae on the body, solid spicules (43.2-43.9 ㎛ long) with a cephalated proximal end, a long tubular shaped gubernaculum with dorsal swelling, and a conico-cylindrical tail with two to four terminal setae. In this report, we provide a taxonomic description and illustrations of a new species of the genus Pseudosteineria by differential interference contrast microscopy.

WBAN 환경에서 채널 추정 기반의 공용 채널 간섭 제거 기술 (A Study for Co-channel Interference Cancelation Algorithm with Channel Estimation for WBAN System Application)

  • 최원석;김정곤
    • 한국통신학회논문지
    • /
    • 제37권6C호
    • /
    • pp.476-482
    • /
    • 2012
  • 본 논문은 2.4GHz 대역을 사용하는 WBAN (Wireless Body Area Network)환경에서 동일 채널을 사용하는 경우에 발생하는 간섭을 제거하기 위한 여러 간섭 제거 기술에 대해서 분석 하고 서로 비교, 평가 하였다. ML (Maximum Likelihood), OC (Optimal Combining) 그리고 MMSE (Minimum Mean Square Error) 방식이 후보 기술로 고려되었으며, 수신 성능과 구현 복잡도 사이의 trade-off 관점에서 서로 비교 하였다. IEEE 802.15.6 에서 제시 하는 채널 모델 및 간섭 시나리오를 적용하여 성능 평가를 수행한 결과, ML과 OC 알고리즘 등이 우수한 성능을 나타내는 것을 알 수 있었다. 하지만, ML과 OC의 경우 원하는 신호의 채널 정보뿐만 아니라 간섭채널의 정보를 알아야 하기 때문에 채널을 추정하기 위한 구현 복잡도 및 추정 에러에 민감한 단점을 가지고 있게 된다. 한편, 실제 채널 추정을 수행 하여 성능 비교를 한 경우에는 MMSE와의 성능 격차가 많이 감소한 것을 볼 수 있었으며, 이에 따라, 저전력 및 소형화가 필요한 WBAN 환경에 적용하기 위해서는 성능과 복잡도 사이의 trade off를 고려한 간섭 제거 기술의 선택 및 연구가 중요할 것으로 판단된다.

Plume Interference Effects on the Missile with a Simplified Afterbody at Transonic$^{}$ersonic Speeds

  • Kim, H. S.;Kim, H. D.;Lee, Y. K.
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2002년도 제18회 학술발표대회 논문초록집
    • /
    • pp.41-42
    • /
    • 2002
  • The powered missiles with very high thrust level can make highly underexpanded jet plume downstream of tile exhaust nozzle exit so that strong interactions between the exhaust plume and a free stream occur around the body at transonic or supersonic speeds. The interactions result in extremely complicated flow phenomena, which consist of plume-induced boundary layer separation, strong shear layers, various shock waves, and interactions among these. The flow characteristics are inherent nonlinear and severe unstable during the flight at its normal speed as well as taking-off and landing. Eventually, the induced boundary layer separation and pitching and yawing moments by the interactions cause undesirable effects ell the static stability and control of a missile.

  • PDF