• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.7
• /
• pp.946-953
• /
• 2018

Photo-plethysmography (PPG), which measures changes in the peripheral blood flow of a human body using difference in absorption rate of light, is a measurement method that is studied and used in clinical and various applications due to its simple circuit configuration and measurement convenience. Magneto-plethysmography (MPG), which is newly developed by our team, is a method of measuring changes in the conductivity of biological tissues by using a eddy current induced by a time-varying magnetic field, and is not subject to optical interference. In this study, we investigated the detection characteristics of MPG according to the change of the conductivity of the object and fluid to be measured by simultaneously measuring PPG and MPG. In order to control the speed of fluid known in advance, a blood flow simulator was implemented and used. The fluid used in the experiment was general mineral water and physiological saline (0.9% NaCl) solution. Experimental results show that the amplitude change of the measured PPG was 0.3% in normal water and saline solution, and that of MPG was 77.3%. Therefore, it is considered that the magneto-plethysmography (MPG) has a strong correlation with the conductivity of the fluid.

• Journal of Biomedical Engineering Research
• /
• v.33 no.4
• /
• pp.169-176
• /
• 2012

Tumor cell morphology is closely related to its migratory behaviors. An active tumor cell has a highly irregular shape, whereas a spherical cell is inactive. Thus, quantitative analysis of cell features is crucial to determine tumor malignancy or to test the efficacy of anticancer treatment. We use 3D time-lapse phase-contrast microscopy to analyze single cell morphology because it enables to observe long-term activity of living cells without photobleaching and phototoxicity, which is common in other fluorescence-labeled microscopy. Despite this advantage, there are image-level drawbacks to phase-contrast microscopy, such as local light effect and contrast interference ring. Therefore, we first corrected for non-uniform illumination artifacts and then we use intensity distribution information to detect cell boundary. In phase contrast microscopy image, cell is normally appeared as dark region surrounded by bright halo ring. Due to halo artifact is minimal around the cell body and has non-symmetric diffusion pattern, we calculate cross sectional plane which intersects center of each cell and orthogonal to first principal axis. Then, we extract dark cell region by analyzing intensity profile curve considering local bright peak as halo area. Finally, we calculated the Fourier descriptor that morphological characteristics of cell to classify tumor cells into active and inactive groups. We validated classification accuracy by comparing our findings with manually obtained results.

• Journal of Haehwa Medicine
• /
• v.8 no.2
• /
• pp.317-327
• /
• 2000

Through the study about Che-Qi-Jung(諸氣證) concerned with phenomenon of stress, we concluded as fallow. 1. Stressors are recognized three parts, internal cause, external cause, non-interexternal cause, in the oriental medicine. And the reaction of the body about stressors, was expressed change of Qi(氣). 2. The vascular system and autonomic nervous system are tensed or relexed. Because the etiology of Yuk-Em(六淫), Chil-Jeong(七情) make lose up and down, in and out, circulation of Gi(氣). The symtom caused with stress are explained, divided into Chil-Qi(七氣), Gu-Qi(九氣), Joong-Qi(中氣), Qi-Tong(氣痛), Qi-Yuk(氣逆), Qi-Wool(氣鬱). 3. The symtom of Chil-Qi is recognized into psycholoQical stress and Mae-Haek-Qi(梅核氣). The symtom of Gu-Qi is composed of Chil-Qi and Han(寒), Youl(熱), Ro(勞). 4. The symtoms of Qi-Yuk and Joong-Qi are caused by the ascent of Hwa-Qi(火氣). And Hwa-Qi is made by rage and depression. Qi-Yuk is chronic symtom that the ascent of Hwa-Qi is made by out of function in up and down mechanism of Qi. Joong-Qi is acute symtom that patholoQical state of Qi-Yuk take place for a while by sudden psycholoQical shock. 5. The symtom of Qi-Wool is loss of funtion made by depressed state in physioloQical mechanism, and Qi-Wool is observed in depressive psychosis and hypochondriasis and psychogenic. 6. The symtom of Qi-Tong is the pain caused by interference of circulation of Qi-Hyul(氣血). PsycholoQical stimulation such as rage and depression, tense autonomic nervous system. This make convulsion in gastro-intestine or vascular circuluation or abdominal muscles, and the pain is caused by convulsion.

• Archives of Craniofacial Surgery
• /
• v.9 no.2
• /
• pp.45-50
• /
• 2008

Purpose: Traditionally, titanium miniplate has been used for rigid fixation of mandible fractures. However, the limitations of metal plate have been reported such as hypersensitivity, interference with the cranio-facial growth of growing child, secondary bone resorption around the plate, foreign body reaction, declination of primary callus formation, and bone atrophy, and so forth. Recently, biodegradable miniplate has been introduced and used as an alternative to the metal plate despite of its lower strength. This study evaluated the usefulness and stability of biodegradable plate and screw for treatment of mandible fractures. Methods: In this study, 61 patients(92 areas) diagnosed as mandible fracture in the last 2 years have been reviewed. We used titanium plate and screw in 32 patients, and biodegradable plate and screw($INION^{(R)}$) in 29 patients. Stability of plates and screws, bony healing process and its side effects were observed by clinical and radiographic assessment. Results: In the titanium material group, one of malocclusion, two of mouth opening limitation, three of pain, three of palpation were shown. The plate of six patients involved in these complications were removed. In the biodegradable group, two of mouth opening limitation, two of pain, one of localized wound infection were shown and one plate was removed secondarily. Conclusion: There was no statistical difference between two groups in bony healing and complication rates. Biodegradable implants show efficient stability during initial bone healing and low side effects in long-term follow up periods.

• Journal of the Korean Society of Costume
• /
• v.25
• /
• pp.5-20
• /
• 1995

The fashion of late Yi dynasty had explored a possibility of new fashional beauty from its own experiences throughout the history of Korean fashion excluding any interference of foreign fashions, and brought out some characteristics ; first, the aesthetical value focused on the more human fashion resulted in the exposure of waist. This aesthetical change in the fashion of late Yi dynasty produced out results as follows ; the length and width of jacket became short and narrow maintaining the basic form, while the width of skirt became increased to be contrasted exceptionally with the upper coat. This mode of fashion reveals the transitional movement from the emphasis on balance to that on unbalance in the late period of Yi dynasty. But regarding the fact that the proportional change by the ways of putting on skirt became to be similar to the golden ratio, we can see many examples throughout the folk paintings by Shin Yun bok, we find that the fashional beauty of that age pursued ideal harmony and unity all the time being in spite of its tendency toward non-refinement. Second, we see another peculiarity in the mode of woman's fashion from the paintings by Shin Yun-bok who always depicted the hu-man nature frankly. For example, the jacket became shorter to emphasize lady's slim waist, and underwears began to be exposed after the upper part of skirt had been to expose lady's waist while the bottom line pulled up highter than before. Thus, as the function of robe had changed from a mere means of covering into an expression of beauty, the fashion of late Yi dynasty began to express a perfectly new beauty possessing an erotic mood and sensu-ality of a woman, which was its inner aesthetic need. Third, this emergence of new fashional beauty made the mental value of man and the aesthetic views of that time quite different from the previous ones, and finally there came various expressions of a new beauty. There-fore, the woman's fashion of late Yi dynasty is noted for the exposure and emphasis on the body line of a woman after the aesthetic view-point had changed of time toward pragmatism and humanism, while upholding the traditions of Korean clothes and pride for the nation. And our ancestors realized very Korean fashional beauty by pursuing the expressional ways of gentle, indirect emphasis upon the feminine and natural beauty to exclude and ar-tificial, direct and straightforward exposures and images.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.7 s.196
• /
• pp.90-97
• /
• 2007

This paper describes the development of 6-axis force/moment sensor considered adult weight far an intelligent foot of humanoid robot. In order to walk on uneven terrain safely, the foot should perceive the applied forces Fx, Fy, Fz and moments Mx, My, Mz to itself and control the foot using the forces and moments. The applied forces and moments should be measured from a 6-axis force/moment sensor attached to the foot, which is composed of Fx sensor, Fy sensor, Fz sensor, Mx sensor, My sensor and Mz sensor in a body. Each sensor should get the deferent rated load, because the applied forces and moments to foot in walking are deferent. Therefore, one of the important things in the sensor is to design each sensor with the deferent rated load and the same rated output. In this paper, a 6-axis force/moment sensor (rated load of Fx and Fy are 500Nm and Fz sensor is 1000N, and those of Mx and My are 18Nm, Mz sensor is 8Nm) for perceiving forces and moments in a humanoid robot's foot was developed using many PPBs (parallel plate-beams). The structure of the sensor was newly modeled, and the sensing elements (plate-beams) of the sensor were designed using by ANSYS software (FEM (Finite Element Method) program). Then, a 6-axis force/moment sensor was fabricated by attaching strain-gages on the sensing elements, and the characteristic test of the developed sensor was carried out. The rated outputs from FEM analysis agree well with that from the characteristic test.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.1
• /
• pp.57-66
• /
• 1996

In this paper, a new biotelemetry system for a transcutaneous data communication between an implanted artificial heart with a control system and an external human-interfaced management system has been developed. A radio telemetry using radio frequency is a commonly used method in the conventional telemetry systems. But, it is not suitable for the medical applications because of not only an interference due to a radio broadcasting but also a harmfulness to the human body. In this paper, therefore, a new biotelemetry system applied to an artificial heart has been developed with the results of the recent research for an optical telemetry system based on the infrared light transmission with good skin permeability. The performance of the biotelemetry system developed has been assessed through mock circulatory experiments, and the clinical applicability has been also confirmed with the successful results in the animal experiments.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.512-515
• /
• 2001

The heifer electrocardiograph is a widely progressing research which is used in judgement to existence for a heart disease and analyzes electric potential changes of heart movement during continuous living of everyday after attaching to body portable holler recorder for twenty-four hours. In order to obtain electrocardiogram clearly, it must eliminate that 60Hz power line interference, baseline wandering, noise of muscle constriction. In holter electrocardiogram, the most big problem which is recorded signal of ECG(electrocardiogram) is a baseline wandering elimination, which is occurred by rhythm of respiration and muscle constriction of part from attaching to an electrode. Such baseline is roughly irregular wandering and shaking up and down therefore the part of baseline wandering elimination is very important because it is difficult of ECG diagnosis. In this study, it is stabilized baseline wandering in analog part as implementation f real-time signal processing digital filter so it is applicable to analyze patient's heart disease by way of design of baseline wandering elimination system.

• Journal of Powder Materials
• /
• v.22 no.4
• /
• pp.234-239
• /
• 2015

Electronic products are a major part of evolving industry and human life style; however most of them are known to emit electromagnetic waves that have severe health hazards. Therefore, different materials and fabrication techniques are understudy to control or limit transfer of such waves to human body. In this study, nanocomposite powder is dispersed into epoxy resin and shielding effects such as absorption, reflection, penetration and multiple reflections are investigated. In addition, nano size powder (Ni, $Fe_2O_3$, Fe-85Ni, C-Ni) is fabricated by pulsed wire evaporation method and dispersed manually into epoxy. Characterization techniques such as X-ray diffraction, Scanning electron microscopy and Transmission electron microscopy are used to investigate the phase analysis, size and shape as well as dispersion trend of a nano powder on epoxy matrix. Shielding effect is measured by standard test method to investigate the electromagnetic shielding effectiveness of planar materials, ASTM D4935. At lower frequency, sample consisting nano-powder of Fe-85%Wt Ni shows better electromagnetic shielding effect compared to only epoxy, only Ni, $Fe_2O_3$ and C-Ni samples.

• Journal of Welding and Joining
• /
• v.28 no.5
• /
• pp.75-79
• /
• 2010

The Remote welding system(RWS) using $CO_2$ laser equipment has focusable distance of laser beam longer than 800 mm from workpiece and can deflect the laser beam by the scanner mirrors very rapidly. In the case of normal welding system based on robot, there is a limit to move the shortest path in short time and this causes interference between robot and workpiece. On the other hand, RWS is the optimized equipment to get big merits with advanced sequence of welding and short cycle time. However, there is still a pending task such as the control of plasma in the welding process of thick sheets therefore, it requires high power laser beam because of the absence of assist gas equipment in itself. In this study, high-tensile steel plates were overlap welded with $CO_2$ RWS for the production of car body and the influence of penetration depth according to the existence of assist gas was analyzed. Excellent tensile strength with enough width of molten zone independent to penetration depth was observed under welding condition with 3.6 kW laser power and 2.8 m/min welding speed without assist gas. Finally, the proto-type automotive parts were produced by applying the deduced optimal welding condition.