• The Research Journal of the Costume Culture
• /
• v.16 no.5
• /
• pp.852-862
• /
• 2008

The purpose of this paper is to find how to do the width of skirt and the girth of the waist in the adequate pattern making for the obese women's skirt. Appearance test of the five experimental skirts was evaluated by the four experts in clothing construction. At the same time, 3D clothing air volume was observed for the five types of experimental skirt with different size specifications. The results from the appearance test were as follows; when the width of skirt pattern is set for(the shell girth/2), it was suggested w/4+1(front), w/4(back) for girth of the waist. On one hand, in case of (the shell girth of front)/2+(the shell girth of back)/2, it was suggested(the waist girth of front)/2 and(waist girth of back)/2 for obese women's skirt with the best appearance. As results, it was found that the width of skirt pattern for the obese women should be the greatest shell girth instead of hip girth. In the case of the hip girth, the amount of ease on hip was suggested 6cm. It was found that pattern with the wrinkle of ease was full of the gaps between body and skirt in 3D clothing air volume. In spreading out to 2D flat pattern from 3D scan data, when the width of skirt pattern was set for(the shell girth of front)/2+(the shell girth of back)/2, it was suggested(the waist girth of front/2)+(the waist girth of back/2) than the shell girth/2 in girth of the waist for the best appearance. And the conversion of 3D scan data into 2D flat pattern in curve shape of crosswise had to spread out of the plane in straight line. The obese women's clothing should be manufactured with systematical consideration of the diversity and scarcity of the obese women's body shape.

• Archives of design research
• /
• v.12 no.1
• /
• pp.157-166
• /
• 1999

With the increase in use of the computer, the VCT syndrome has occured as a new socialJhea/health problem. ErgonomicaI design standards are a for the users to reduce stress and poor physical posture in the human body. In this study. we have suggested design dimensions recommended from previous studies. We also have reviewed users' preference dimenision, and analyzed differences between users' preference dimenision. and the previous design aiteria to verify physical appropriateness. We analyzed how each design dimension was reached and affected the tunan body by objective EMG evaluation. and subjective evaluation of physical discomfort and oorrIort. We have found that keyboard height is very important in a workstation. If the elbow's height is lower than the keyboard's height. it effedS the hand and wrist. If higher, it brings fatigue to the shoulder and neck. As a result of this experiment. we suggested that the height of a keyboard desk for Koreans be 660mm for the fixed type and 540-774mm for the adjustable type. Also other design reoommendations were suggested in the thesis. In ooncIusion, our research will be very important in the database because it provides adjustable ranges to fit user's body types in the various design flekIs.

• Journal of Korean Association for Spatial Structures
• /
• v.9 no.4
• /
• pp.89-96
• /
• 2009

Apartment is the most favorite residential type which already occupies more than 50 percent of total number of housing unite in Korea. The interior space design shows various changes of trends within old and legal standard in terms of basic dimension. The most important function of housing means that Provides comfortable living spaces for a family and enjoying relaxation of stress form social activities. This residential space effects direct or indirect to each family members self-satisfaction and relationship. The basic factor for space design brings dimension which is enable space efficiency together with behavioral route, size of electronics and furnitures. Apartment dwelling type was introduced from out of countries. From the very beginning that inharmonious conflicts found and adjusted for several decades. But, the changes of body conditions of new generation has not considered as a dwelling space design yet. This research may call for attention of changing human scale standards for housing in various field of study.

• Radiation Oncology Journal
• /
• v.7 no.1
• /
• pp.133-140
• /
• 1989

Three-dimension paraffin compensator was designed to construct the tissue equivalent compensator for irregular body contours and obiliques beam incidence. The ratio of compensator thickness to tissue deficit was depended on field size, depth and air gap because the scattered dose loss. The ratio of compensator-tissue was optimized 0.79, 0.73, 0.61 and 0.56 in 6MV x-rays as function of field size $4{\times}4$, $10{\times}10$, $20{\times}20$ and $30{\times}30cm^2$ respectively. in our study. Using this tissue equivalent compensator, it can be got 2% difference of dose at same mid-plane in phantom study.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.8
• /
• pp.889-895
• /
• 2007

Quantifying dynamic stability is important to assessment of falling risk or functional recovery for leg injured people. Human locomotion is complex and known to exhibit nonlinear dynamical behaviors. The purpose of this study is to quantify major joints of the body using chaos analysis during walking. Time series of the chaotic signals show how gait patterns change over time. The gait experiments were carried out for ten young males walking on a motorized treadmill. Joint motions were captured using eight video cameras, and then three dimensional kinematics of the neck and the upper and lower extremities were computed by KWON 3D motion analysis software. The correlation dimension and the largest Lyapunov exponent were calculated from the time series to quantify stabilities of the joints. This study presents a data set of nonlinear dynamic characteristics for eleven joints engaged in normal level walking.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.24 no.4
• /
• pp.57-72
• /
• 2022

This study categorized and analyzed the body types of adult women in their 20s and 30s using 3D human measurement data from the 8th Size Korea, and intended to construct body shape and dimension data necessary for modeling Korean standard avatars. Data analysis considered data from 1302 adult women in their 20s and 30s, and a total of 49 index values, drop values, and angle items were subjected to factor analysis and one-way ANOVA to categorize the body type, and Duncan test to post-verify significant differences by type. As a result of conducting factor analysis, 13 factors were extracted and were categorized into 4 body types. Type 1 is short in the upper torso, long in the lower torso, long in the arms and legs, and has a upright body shape and sagging shoulder. Type 2 is short in the torso, arms and legs, and has large torso flexion and lower body circumference. Type 3 has abdominal obesity with small torso flexion and lower body circumference. Type 4 is a small body bending forward type. For the distribution of body types by age among those in their 20s and 30s, the highest appearance rate was Type 1 and was therefore selected as the represntative body type. The body type information of this study will be used as basic data for developing standard avatars.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2002.09a
• /
• pp.136-137
• /
• 2002

We have been researching upgrade version of a stereotactic whole body frame, used for evaluating daily setup accuracy of the patient positioning during fractionated extra-cranial stereotactic radiotherapy. Currently, we are focusing on the development of a new stereotactic whole body frame, and then will handle organ movement produced by breathing at the next stage. MeV-Green is chosen for the best immobilizer possible and the epoxy board is for the frame with the dimension of 110 em in length, 50 cm in width in order to maximize transmission rate of the beam from lateral or posterior direction and to fit CT and PET scanners with an aperture of 55 cm at least. The key point of an upgraded stereotactic whole body frame will be set on the collision-free rotation of the gantry with the frame, and the development of the checking structure for the daily patient repositioning regarding internal target.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.3
• /
• pp.24-30
• /
• 1998

Strength and displacement of jig body in index machine utilized for multiprocess machining such as drilling, boring and tapping, etc, at the same time were analyzed by the use of finite element analysis soft ware ANSYS 5.2A. The whole geometry was constructed by 4048 elements and 7016 nodes employing 8 node brick element. The analyses were carried out on five loading cases combining vertical and horizontal machining to simulate the case occurring large displacement and the one occurring small displacement one and provided following conclusions. (1) Jig body had sufficient strength because its safety factor was 6.95 even in the most severe loading case. (2) The largest displacement in Z direction was 549 m and that in radial direction was 43.7 m. (3) In order to reduce the displacement, vertical machining rather than horizontal or two or three processes should be adopted in the same station. (4) Alternate change of horizontal machining direction at consecutive stations can reduce the displace ment. (5) The dimension of the slider should be increased to reduce the displacement by the tolerance in the sliding part. (6) A bypass idle piston head needs to be installed to give a counterpart supporting load from opposite direction for a single horizontal machining case.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.48 no.1
• /
• pp.108-119
• /
• 2024

In this study, we aimed to propose enhancements to the dimensions and design of walking aids tailored for elderly women. Specifically, we focused on wheeled walking assistance devices and aligned each structural component with the appropriate human body dimensions to suggest appropriate product dimensions organized by size clusters, aiming to maximize the practicality of the results. We extracted essential factors required for product design, including human body size elements. The dimension extraction method was clustered to establish connections between key human body parameters-such as height, weight, and age groups-and product dimensions. We conducted a comparative analysis of walking aid product dimensions according to the design elements and sizes of models currently available in the market. The outcomes of this study offer objective, data-driven insights into areas where existing models on the market could benefit from improvement and we anticipate that the findings of this study will provide a solid, quantitative foundation for individuals when selecting the most suitable model for their needs.

• Journal of the Korean Society of Costume
• /
• v.59 no.3
• /
• pp.67-81
• /
• 2009

Body shape of a child in elementary school is distinguished by physical differences in the form of low weight, normal weight and obesity, which are influenced by various periodic environments. In particular, there are hardly any patterns for obese children in elementary school to choose. To this end, the purpose of this study is to supplement the problems with the production lines of the companies for children's patterns as well as an analysis on the physical characteristics of obese children and to suggest the patterns appropriate to obese children. This study employed obese children from the 3rd- to 5th-grade elementary school students whose number has been rapidly increasing and conducted a questionnaire regarding the draft of the patterns for obese children on their mothers and the makers of children's clothing. Based on the results, the study compared and analyzed ordinary children's patterns to the patterns in question by suggesting a dimension system for Korean obese children. The results are as follows. The obesity rate of the children in elementary school has been grown in significant numbers every year, whereas obese children's sense of self-identity and degree of satisfaction with their patterns appeared to be much lower than other ordinary children in the peer group; also, the satisfaction level their mothers with their children's patterns appeared to be low. In order to verify the degree of the children's satisfaction with their patterns, the study suggested a dimension system for the obese children and displayed appropriateness by comparing the children patterns from ordinary companies and the patterns in question.