• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.16 no.3
• /
• pp.127-131
• /
• 2006

The efflorescence mechanism of ceramic bodies with different sintering temperature was studied by quantitative analysis for the effect of various metal ions and anions. SEM and EDS characterization for efflorescence formed on the surface of the ceramic body showed that the main components of the efflorescence were Ca and S atoms. Leaching concentrations of various metal ions and anions for the ceramic bodies prepared by wet mixing with pH 7 and pH 10 were evaluated by ICP and IC analysis. The results of leaching test showed that the concentration of Ca ion at pH 7 body was eight times more than that of pH 10 body. Ca-rich efflorescence was not formed on the surface of ceramic body which prepared at pH 10 and sintered over $1100^{\circ}C$.

• Macromolecular Research
• /
• v.13 no.1
• /
• pp.54-61
• /
• 2005

We prepared temperature-sensitive liposomes (TS-liposomes) modified with a thermo sensitive polymer, such as poly(N-isopropylacrylamide) (PNIPAAm), to increase the degree of drug release from liposomes at the hyperthermic temperature. A PNIPAAm hydrogel containing TS-Iiposomes was also prepared to obtain a hydrogel complex at body temperature. In addition, a depot system for local drug delivery using the polymer hydrogel was developed to enhance therapeutic efficacy and prevent severe side effects in the whole body. The PNIPAAm-mod­ified TS-liposome was fixed into the PNIPAAm hydrogel having a high temperature-sensitivity. The release behavior of calcein, a model drug, from TS-liposomes in the PNIPAAm hydrogel was then initiated by external hyperthermia; the results indicated that sustained release as a function of temperature and time was caused by the thermosensitivity of the liposome surface and diffusion of the drug into the PNIPAAm hydrogel. Our results indicated that TS-liposomes in a PNIPAAm hydrogel represented a plausible system for local drug delivery.

• Corrosion Science and Technology
• /
• v.22 no.4
• /
• pp.257-264
• /
• 2023

Ti-6Al-4V alloys are mainly used as dental materials due to their excellent biocompatibility, corrosion resistance, and chemical stability. However, they have a low bioactivity with bioinertness in the body. Therefore, they could not directly bond with human bone. To improve their applications, their bone bonding ability and bone formation capacity should be improved. Thus, the objective of this study was to improve the bioinert surface of titanium alloy substrate to show bioactive characteristics by performing surface modification using wollastonite powder. Commercial bioactive wollastonite powder was successfully deposited onto Ti-6Al-4V alloy using a room temperature spray process. It was found that wollastonite-coated layer showed homogeneous microstructure and uniform thickness. Corrosion resistance of Ti-6Al-4V alloy was also improved by plasma electrolytic oxidation treatment. Its wettability and bioactivity were also greatly increased by wollastonite coating. Results of this study indicate that both plasma electrolytic oxidation treatment and wollastonite coating by room temperature spray process could be used to improve surface bioactivity of Ti-6Al-4V alloy substrate.

• Journal of the Korean Society of Safety
• /
• v.22 no.4
• /
• pp.13-19
• /
• 2007

An numerical method to estimate thermal diffusivity has been developed for one-dimensional unsteady heat conduction problem, when the temperatures are know at two positions in a semi-infinite body. Using the closed form solution which has already derived an explicit solution for the inverse problem for one-dimensional transient heat conduction using Laplace transform technique, we first estimate the surface temperature. The thermal diffusivity can be estimated by using the estimated surface temperature and measured temperatures, which include some uncertainties. The estimated surface heat flux and thermal diffusivity are found to be in good agreement with those of the experimented conditions. This method will be extended to the simultaneous measurement of thermal diffusivity and thermal conductivity.

• Journal of computational fluids engineering
• /
• v.18 no.3
• /
• pp.87-93
• /
• 2013

A computational study has been performed to examine the effects of catalytic walls on the stagnation region heat transfer. The boundary conditions for none, finite, and fully catalytic walls have been incorporated into a multi-block compressible Navier-Stokes solver. In the present study, both chemical and thermal non-equilibrium effects were included. The flows over a blunt body model were simulated by varying surface catalytic recombination rates. A full range of catalycities was explored in the context of a constant wall temperature assumption. Detailed information on species concentrations, temperature, and surface heat flux are presented. Comparison with available flight data of surface heat flux is also made.

• Journal of Aerospace System Engineering
• /
• v.16 no.6
• /
• pp.90-98
• /
• 2022

The output of an infrared (IR) sensor mounted on an EO/IR payload is known to change during a mission period in an orbital environment. As it is required to calibrate the output of the IR sensor periodically to obtain high-quality images, an on-board black body system is mounted on the payload. All systems operating in the space environment require performance tests on ground to verify the target performance in the orbital environment. Therefore, it is also required to test the black body system to verify the performance of the surface temperature uniformity and the estimated representative temperature error within the target temperature range in the operating environment. In this study, calibration of the estimated representative temperature error and verification of the thermal performance of the black body system were conducted by performed a performance test in the thermal vacuum chamber applying deep space radiation cooling effect of an orbital environment.

• Journal of Chest Surgery
• /
• v.2 no.1
• /
• pp.105-114
• /
• 1969

This experiment was carried out to study the responses of cellular component of blood and bone marrow to cold and also the changes of coagulation during cooling. Forty-two mongrel dogs were subjected to hypothermia by ice-water surface cooling technique. Lowest body temperature ranged from 21-23 degree. Dogs were divided into 3 groups,Group I, 12 dogs: pentothal anesthesia for 3 hours, Group II, 20 dogs;hypothermic group and Group III,10 dogs;postsplenectomy hypothermic group. Results were summarized as follows: 1. Hemoglobin, hematocrit and red blood cell count significantly increased when animals were cooled, and increase was noted in similar magnitude among the animals of Group I. 2. White blood cell count extremely decreased after cooling and effect of splenectomy on white blood cell count was not apparent. No significant changes were seen among Group I. 3. Differential count of white blood cell when cooled showed relative increase of polymorphonuclear neutrophil and decrease of lymphocyte. 4. There was marked decrease of platelets when body temperature reached to 21-23degree and essentially. no changes was noted in Group I. 5. Clotting time, bleeding time, plasma prothrombin time, recalcification time, and fibrinolysis showed no significant changes when dogs were cooled. Clot retration and prothrombin consumption during hypothermia appeared to be poor. In Group II, bleeding time decreased after splenctomy and when body temperature was lowered, plasma prothrombin time, clot retraction, and prothrombin consumption decreased. Decreased bleeding time and poor clot retraction were noted in Group I. 6. It was found that megacaryocyte count decreased even though platelet count of peripheral blood markedly diminsished when animals were cooled. There was some tendency of erythroid hyperplasia noted during hypothermia.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.2
• /
• pp.603-608
• /
• 2014

In many manufacturing such as the components of airplane and automobile, aluminum alloys(Al2024) which remarkable in low specific gravity and high strength have been utilized effectively. Face milling machining technology for surface roughness quality of workpiece has been applied in these fields. A face milling machining with chamfered throw away type insert tip can produce a perfect flat surface only in theory. But It is impossible because of many unwanted factors, namely, cutting temperature, plastic deformation, dynamic effect, etc. In this paper, experimental investigations are performed to improve surface roughness after high speed machining of Al2024 using qualified face milling cutter body for high speed machining.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.4
• /
• pp.447-452
• /
• 2006

The remote sensing technique was applied to enhance the water qualify model validation in a large water body. Since the satellite image usually covers the wide surface area of a large water body, it can compensate for the lark of measured data points required for model calibration and verification. This paper describes the analysis of Landsat FTM+images collected on April 29th and September 4th in year 2000 to evaluate surface water temperature of Lake Paldang. The water temperature data obtained from the satellite image were compared with model results by estimating three different methods of error criteria. The residual ratios on April 29th and September 4th were 0.13 and 0.04 respectively. This showed that the model result accords with the data obtained from the process of satellite image. Without considering atmospheric interference, however, transformation process of satellite image causes relatively large residual ratio in the surface water temperature distribution pattern on April 29th. In the future study, therefore, the atmospheric properties of image acquisition point needs to be considered for the application of radiance transformation model.

• Journal of Energy Engineering
• /
• v.4 no.2
• /
• pp.297-302
• /
• 1995

Ignition of a reactive solid in a shape of square corner by a hot surface is studied theoretically. Ignition time and the location of ignition point are determined as a function of dimensionless parameters, with the use of the homogeneous model of ignition. The effect of geometry on the ignition of solid fuel results in the local characteristics: the reaction is initiated in a hot point in depth of the substance. It is shown that ignition time is proportional to the dimensionless initial temperature, whereas for the ignition of the semiinfinite body this dependence was quadratic.