• Fashion & Textile Research Journal
• /
• v.17 no.2
• /
• pp.227-236
• /
• 2015

This study analyzed the lower body type of 30's Korean men to develop a slim-fit pants pattern. As the analysis data, direct measurement data of anthropometric measured value in the 6th Size Korea(KATS, 2010) was used as basic data with 481 men in 30's as analysis objects. The result are as follows. First, the result of analyzing factors for the lower body type classification indicated five factors. Second, the result of executing group analysis (with the independent variable of 5 clusters extracted from the factor analysis)classified the following three types. Type 1(36.8%) displayed a medium height of lower body type, small waist and hip, slim and fit body type with a slim shape between the knee and ankle. The shape between the waist and hip had characteristics of a slight curve and short length. Type 2(35.6%) displayed lowest height of a lower body type that was large and thick between the waist and the hip. The drop value of the waist and the hip was small; therefore, the body type was flat with a minimal curve. The underpart type (below the knee) was the thickest and the length was short. Type 3(27.7%) displayed the highest lower body type, a medium level waist size, flat and narrow waist and belly. This body type had a curve with big drop value of the waist and the hip, lower part from the hip to the ankle (including the knee) and a thick calf with along leg.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.6 no.1
• /
• pp.25-33
• /
• 2004

This study is aimed at reviewing how the Orientalism trend is expressed in the modem fashion in terms of silhouette, color, materials, and detail. To this end, the geographic scope of this study is limited to China, Japan, Korea, while data are collected from fashion collections, domestic and foreign magazines since 2000's, literature, and internet sites. The results of this study can be summarized as follows: 1. Silhouette: the basic square silhouette of the Oriental traditional costume do not disturb the body movement and have an effected on design to smoothly follow the body line rather than cutting out materials into several parts or emphasize the curved body. 2. Color: due to the influence of the Oriental Zen thought, color trend seems to pursue simplicity rather than complexity, and natural aesthetics. In addition, the Oriental colorfulness shall not be ignored. 3. Materials: golden embroidered material, polished satin, jersey, tough or rough materials, etc. have used with materials of the Oriental traditional costume came into fashion. In pattern, the Orientalism trend is expressive of pattern by Chinese ink-spread technique, simple brush touch technique, cloud pattern, lotus flower pattern or dragon pattern, all of which feature the Oriental calm aesthetics or those motivated by the Oriental traditional patterns. 4. Detail: the techniques of handicrafts and manual arts such as meticulous embroidery, tassel or patchwork reflect well the Orientalism trend in the modem fashion.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.7
• /
• pp.1303-1313
• /
• 2001

This study was performed to develop a mobile functional pattern reflecting the characteristics of the middle aged women's lower body types based on the slacks construction components. The results and procedures obtained from this study were as follows; 1. The bodys measurement of the 252 middle aged women of 45∼59 years old were used to analyze the size and somato type. 2. For multiple analysis of the lower body types, horizontal and vertical section maps were obtained by sliding gauge method and extracted constructional factors of slacks. 3. The following condition was determined with both standing and moving position of body: (gradient of C.B.L/2)+3°and (back crotch extention)+2cm. 4. Development of new slacks pattern drafting was based on the result of data analysis. Trough the wearing test by the sensory evaluation, It showed that developed slacks pattern was judged better than existing patterns in items of comfort of comfort of silhouette and moving.

• The Research Journal of the Costume Culture
• /
• v.16 no.5
• /
• pp.852-862
• /
• 2008

The purpose of this paper is to find how to do the width of skirt and the girth of the waist in the adequate pattern making for the obese women's skirt. Appearance test of the five experimental skirts was evaluated by the four experts in clothing construction. At the same time, 3D clothing air volume was observed for the five types of experimental skirt with different size specifications. The results from the appearance test were as follows; when the width of skirt pattern is set for(the shell girth/2), it was suggested w/4+1(front), w/4(back) for girth of the waist. On one hand, in case of (the shell girth of front)/2+(the shell girth of back)/2, it was suggested(the waist girth of front)/2 and(waist girth of back)/2 for obese women's skirt with the best appearance. As results, it was found that the width of skirt pattern for the obese women should be the greatest shell girth instead of hip girth. In the case of the hip girth, the amount of ease on hip was suggested 6cm. It was found that pattern with the wrinkle of ease was full of the gaps between body and skirt in 3D clothing air volume. In spreading out to 2D flat pattern from 3D scan data, when the width of skirt pattern was set for(the shell girth of front)/2+(the shell girth of back)/2, it was suggested(the waist girth of front/2)+(the waist girth of back/2) than the shell girth/2 in girth of the waist for the best appearance. And the conversion of 3D scan data into 2D flat pattern in curve shape of crosswise had to spread out of the plane in straight line. The obese women's clothing should be manufactured with systematical consideration of the diversity and scarcity of the obese women's body shape.

• Korean Journal of Human Ecology
• /
• v.21 no.5
• /
• pp.975-988
• /
• 2012

Although the pattern development for tight-fitting clothing has been carried out using 3D data on humans, the pattern development using 3D scan data obtained for various postures still remains an interesting subject. In this study, we have developed the 2D pattern using the 3D human body reflecting standing and cycling postures. The 3D scan data of a subject was obtained using Cyberware. 2C-AN program(Triangle simplification and the Runge-Kutta method) was used in the system to reduce the 3D scan data points and to make segmented triangular patches in a plane from 3D data. As results, surface distance and area of each body part of standing and cycling postures were also provided for the future application of the functional clothing construction. The area of center piece on the front (c.front) decreased by $106.45cm^2$(-13.08%) and that of lateral piece(s.back) on the back increased by $144.96cm^2$(18.69%) in the patterns of cycling posture. The girth of neck and waist for the cycling posture increased by 0.88cm (3.92%) and 1.56cm(4.40%) respectively, and the that of thigh decreased by 1.01cm(-2.24%). The differences between the area in the 2D pattern obtained from the 3D scan data and that in the 3D scan surface data for standing and cycling postures were very small($-10.34cm^2$(-0.32%) and $-44.33cm^2$(-1.32%)).

• Journal of the Korean Society of Clothing and Textiles
• /
• v.40 no.1
• /
• pp.97-113
• /
• 2016

This study develops pant patterns using body shape, measurement and shell mesh data to decide optimal women's pants according to styles with excellent size, fit and shape for different individuals and silhouettes. Standard landmarks, lines, triangles and structures were set on a 3D scanned lower body shell to represent women in their twenties and flattened as a 2D pattern. Patterns were created and analyzed according to culotte, formal, slacks and tight type considering crotch shape, location of the crotch point, and adjusting waist darts. Flattened patterns were rotated to compare existing methods. The crease lines were then set through the hip protrusion point and compared. The main factor of the pant pattern were extracted, total rise, crotch depth, crotch width, angle of center line, shape of the center line curve, the thigh width, the amount of waist dart, and crease line position. With going tight style from the culotte, the fits are closer to the figure with minimized thigh circumference, the dart amount decreases, the crotch depth increases, the crotch extensions were shorter, and the angle of the center back increased. The total rise is U shape for culotte and is closer to V shape as the silhouette tightens. T-test of appearance evaluation of the developed pant pattern were conducted after analyzing measurements and shapes of each styles. The results of the developed patterns were superior to existing patterns in accordance to hip line between body and pants as well as appearance evaluation. We found systematic mechanisms among pattern factors that create various pant silhouettes. Evidence on classification of the silhouettes of traditional types of pants were explained objectively through the process of playing out 3D forms.

• The Korean Journal of Zoology
• /
• v.23 no.1
• /
• pp.1-12
• /
• 1980

Changes and possible origin of haemolymph proteins during the cuticle formation and hardening are determined by means of acrylamide gel electrophoresis and immunodiffusion. The results by acrylamide gel electrophoresis showed at least 19 protein bands in the haemolymph and 13 fractions in the fat body with relatively constant pattern during the period of cuticle formation and hardening. Both haemolymph and fat body proteins are generally characterized by the presence of three to four heavy stained bands and several thin bands near the top region of the gel. At least over five haemolymph proteins are constantly present during this period. Immunodiffusion tests show that of total eight to nine pupal haemolymph proteins two proteins were already detected in the fat body before pupation and other two proteins were also found in the fat body immediately after pupation, suggesting fat body as possible source of these two haemolymph proteins.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.1
• /
• pp.179-184
• /
• 2004

This paper presents an image segmentation algorithm to obtain the 3D body shape data that the grid pattern and the body contour lute in the background image are extracted using the new proposed hybrid method. The body contour line is extracted based on maximum biased anisotropic recognition(MaxBAR) algorithm which recognizes the most strong and robust edges in the image since the normal derivative at the edges is large, while the tangential derivatives can be small. The grid patterns within body contour lines are extracted by grid pattern detection (GPD). The body contour lilies and the grid patterns are combined. The consecutive run test based on heuristic method is used to link the disconnected line and reduce noise line. This proposed segmentation method is more effective than the conventional method which uses a gradient and a laplacian operator, verified with application two conventional method.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.2
• /
• pp.105-112
• /
• 2016

In this paper, we propose a technique that can be mapped to the most appropriate type of health patterns, depending on the health status of health promotion measures to establish a body mass index (BMI). When used as a mapping scheme proposed in this paper it is possible to contribute to effective healthcare and health promotion. BMI is widely used as a simple way to assess obesity because body fat increases the status and relevance. Despite normal weight determined by this and because of the social atmosphere has increased prefer the skinny tend to try to excessive weight loss. Since health can affect the health maintenance and promotion of the rest of your life, depending on whether and how much weight perception and health can be considered as very important. Therefore, this paper identifies the differences in perception and in this respect for the body mass index (BMI). And physical, mental and map the appropriate type of pattern in the relationship between body mass index (BMI) in order to facilitate the social and health conditions. Proposal to give such a mapping technique provides the opportunity to increase the efficiency of health care and health promotion.

• Journal of the Korean Home Economics Association
• /
• v.46 no.9
• /
• pp.137-146
• /
• 2008

This study was conducted in order to spread out lower body 3D scan data of men in their twenties. The aim was to achieve slacks pattern with ease allowance through comparison with existing flat patterns. For conversion of 3D scan data into 20 pattern, reference lines were established by using Rapid Foam in 3D shape analysis software. 2C-AN program and Yuka CAD were used to convert 20 pattern earned with straight posture of 3D scan data into slacks pattern by using Triangle Simplification & Runge-Kutta Method. In order to achieve this we needed to set a line 9cm below the hip line, to array vertex of each block to crease line while maintaining the horizontal line. And then we needed to set ease allowance in back crotch and to set waist circumference or hip circumference ease allowance in side seam of slacks. Results showed that long front crotch length can be achieved if 3D scan data is compared with 20 existing flat pattern. Slacks pattern that raise front crotch by about 1.5cm compared to back crotch and also possess ease allowance in back crotch area are great in appearance evaluation.