• Journal of Advanced Marine Engineering and Technology
• /
• v.41 no.2
• /
• pp.163-170
• /
• 2017

The International Convention for the Control and Management of Ships' Ballast Water and Sediments (hereafter "BWM Convention") will be enforced beginning on September 8, 2017. Even though the STCW Convention (International Convention on Standards of Training, Certification and Watchkeeping for Seafarers) and other international instruments require all ship personnel be qualified under certain competencies and standards, the International Maritime Organization (hereafter "IMO") has no unified requirements for training ship personnel on ballast water management. When the BWM Convention enters into force, all officers and crew on board ships should be intimately familiar with the guidelines and procedures outlined by the BWM Convention, regarding, among other topics, proper record keeping techniques and measures, the layout of the ballast control system, methods of ballast water exchange, and inspections by the port state control. To ensure that officers and crew members are adequately familiar, this paper proposes new competency requirements for ballast water management training and education to be added to the STCW Code. To support the introduction of these new competency requirements, this paper explores the evolution of the BWM Convention and examines how international regulations will be used to implement it.

• Journal of Preventive Medicine and Public Health
• /
• v.49 no.6
• /
• pp.376-385
• /
• 2016

Objectives: This study was conducted to investigate the relationships among job stress, job satisfaction, and mental health in marine officers. Methods: The researchers gathered data on marine officers working at a harbor in Chungcheong Province, South Korea, using a self-reported questionnaire. Mental health was measured by the Symptom Checklist-90-Revision (SCL-90-R), and general characteristics including socioeconomic factors, job stress, and job satisfaction were measured by structured questionnaires. Multiple regression analysis was performed to investigate the relationships among job stress, job satisfaction, and mental health status according to the symptom dimensions of the SCL-90-R. Results: Among the marine officers, obsessive-compulsive behavior, depression, and somatization were the most problematic symptoms. Those who reported poor health, low job satisfaction, and high job stress had a higher prevalence of psychoticism, somatization, depression, anxiety, and phobic anxiety. Conclusions: An occupational health system should be introduced that would regularly check the mental health of marine officers in charge of ships and sailors, in order to help reduce their stress levels, enhance their job satisfaction, and thereby improve their mental health.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.9 no.1
• /
• pp.17-23
• /
• 2003

With the terrorist attacks on 11 September 2001, the ships and their crew' safety and security have become a major issue in the maritime industries, In high-risk terrorism, not only ship owners and port authorities but also crew members on board should take precautions in the conduct of their business. In this paper, the vulnerability and essential elements in overall security of merchant ship are analyzed with a discussion in depth of the concept and principles of maritime security of merchant ship are analyzed with a discussion in depth of the concept and principles of maritime security management. And then, ship's security model and security system to reduce security rish and to minimize damage are proposed.

• Proceedings of KOSOMES biannual meeting
• /
• 2007.11a
• /
• pp.149-152
• /
• 2007

According to the Ship Safety Act amended on 23 Mar. 2006, ships above certain size shall curry position indicating equipment The Vessel Monitoring (VMS) will help to upgrade the present search and rescue mechanism and reduce the loss et lives caused by marine accident Public Notice on standards for installation et ship position indicating equipment was published on 1 Nov. 2007 (MOMAF Notice No. 2007-88). In this paper, we would like to introduce the background, applying ships, prospect for currying ship position indicating equipment at the implementation aspect on Vessel Monitoring System.

• Journal of Korea Ship Safrty Technology Authority
• /
• s.23
• /
• pp.78-97
• /
• 2007

SPM, which is an abbreviation of Single Point Mooring, also called as SBM(Single Buoy Mooring), is a special buoy besides the quays of the harbor for mooring ships, and is normally a 3m wide cone or cylinder shaped steel drum fixed underwater so it won't move, and is used for mooring cargo-work at outer port by laid-up ships and large crude oil carrier. The work of VLCC SPM mainly is accomplished on the open sea. On the open sea as a result of meteorological condition and the ocean wave influence, When the weather condition is get bed, peremptorily moving to the safety place, because of the gale and the billow, almost happened frequently, the pilot is unable to go on board and the tug is also unable to be used Now because of the bad weather the VLCC SPM moving to the other safety place frequently happened in the ulsan port. the construction of new harbor, it constructed many break water around SPM. So that it is necessary to propose the new standard about how to maneuvering area actually. The standard for handling ranges of the SPM operations was tested and verified by a simulation.. So that it is necessary to propose the new standard about how to maneuvering area actually.

• Journal of Navigation and Port Research
• /
• v.26 no.5
• /
• pp.555-561
• /
• 2002

The shipboard working environment of coastal patrol ship is very inferior to the ground working environment and it causes the avoidance of shipboard working and the aging of crew. Especially the air pollution and electromagnetic wave in ships causes an occupational disease. Hence of reduce the shipboard working fatigue is necessary by the security of the comfortable shipboard working environment. In this paper, firstly we evaluate the shipboard working environment by using the measurement results of the shipboard air pollution and electromagnetic wave in the sea. And we propose the measures to reduce the shipboard working fatigue which is based on the evaluation results of the shipboard working environment.

• Journal of Ocean Engineering and Technology
• /
• v.36 no.3
• /
• pp.168-180
• /
• 2022

The IMO has decided to proceed with the early introduction of EEDI Phase 3, a CO₂ emission regulation to prevent global warming. Measures to reduce CO₂ emissions for ships that can be applied immediately are required to achieve CO₂ reduction. We set six different CO₂ emission scenarios according to the type of ship and fuel, and designed a monoethanolamine-based CO₂ capture process for ships using a rate-based model of Aspen Plus v10. The simulation model using Aspen Plus was validated using pilot plant operation data. A ship inevitably tilts during operation, and the performance of a tilted column decreases as its height increases. When configuring the conventional CO₂ capture process, we considered that the required column heights were so high that performance degradation was unavoidable when the process was implemented on a ship. We applied a parallel column concept to lower the column height and to enable easy installation and operation on a ship. Simulations of the parallel column confirmed that the required column height was lowered to less than 3 TEU (7.8 m).

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.6
• /
• pp.600-606
• /
• 2016

Seafarers are often placed in circumstances that require emergency evacuations due to various causes, including ship collisions, sinking, stranding, and fires. Achieving shorter evacuation time is an important factor in increasing the survival rate during these circumstances, but the narrow and complicated structure of ships is an obstacle when it comes to executing a quick evacuation. Also, unpredictable restrictions may be imposed by bad sea or weather. In this study, various experiments were conducted with sailors currently on board ships in order to examine factors that increase evacuation time. The data was then and analyzed. Evacuation time was measured by dividing crews into groups: sailors that were given an explanation of the ship's structure and those that were not. Furthermore, the visibility range was divided into 0 m, 3 m, and 5 m. The results indicated that, having an explanation of the ship structure did not have much of an effect on evacuation time but visibility conditions led to an increase in evacuation time with a maximum of 2.5 to 2.6 times longer when the visible distance was 5 m, 0 m and 3 m. Therefore, ensuring a visible distance of over 5 m was determined to be the most important factor for reducing evacuation time. In the future, effort should be made to ensure a greater visible distance to improve the survival rate of seafarers and passengers on board ships that encounter incidents.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.7
• /
• pp.718-728
• /
• 2013

Analysis of scenarios of transportation oil and gas which produced in the Arctic and others cold seas shows that in the near-term there will be a significant increase of tonnage of tankers for oil and gas and number of ships which should be exploited in difficult ice conditions. For the construction of ice-resistant structures (IRS) intended for production of oil and gas and transportation of these products at ice-class vessels, calculating the load from ice to board the ship and on surface of supports of the platforms are the actuality and urgent tasks. These tasks have one basis in both cases: at beginning of the contact occurs fracture of edge of ice, then occurs compressing of rubble shattered of ice, then they extruding from contact area, after this next layer of ice begin to destruct. At calculating the strength of plating and elements construct of vessels, icebreakers and ice-resistant platforms the specific energy of mechanical destruction ice ${\epsilon}_{cr}$ is an important parameter. For the whole period of study of physical and mechanical characteristics of sea ice have been not many experimental studies various researchers to obtain numerical values of this energetic characteristic of the strength of ice by a method called Ball Drop Test. This study shows that the destruction of the ice from dynamic loading in zone of contact occurs in several cycles, and the ice destructed with a minimum numerical values of ${\epsilon}_{cr}$. The author offer this energy characteristic to take as a base value for the calculation of ice load on ships and offshore structures.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.9 no.4
• /
• pp.287-292
• /
• 1976

The author studied the stability Tualities of stern trawlers in the North Pacific Ocean according to Kato's simple judging method. The author selected 1,000 gross tonnage of A and B types, and calculated each characteristics for various conditions under 5 different free-board and S different KG. Finally, authour obtained some data of stability factors for the two types, and pointed out the zone of safety and danger between stability factor, GM and GZ max. The results obtained here are summarized as follows: The A type of ship is judged that it has the condition of safety when displacement is 2,400 tonnage and the value of K￠ was 3.40m or 3.70m. The B type of ship is judged that it only has the condition of some safety when displacement was 2,400 tonnage and the value of KG is 3.40 m, but ships of the both types have the condition of danger when displacement is 1,300-2,200 tonnage and the value of KG is 3.40-4.60m. Any types of ships under various condition must have appropriate dimensions among GM, free-oard and GZ max for the stability of ships.