• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2013년도 추계학술대회
• /
• pp.438-441
• /
• 2013

알려진바 한 해 우리나라에서 200여 건 이상의 차량 급발진으로 추청 되는 사고(Sudden Unintended Acceleration, SUA)가 발생하지만 지금까지 명확하게 급발진으로 추정되는 사고의 원인을 밝혀내지 못해 사고를 당한 운전자는 막대한 정신적, 물질적 피해를 보고 있다. 이에 차량의 급발진으로 추정되는 사고 시 차량의 상태 및 원인 파악을 위하여 차량 내 설치되는 OBD-II(On Board Diagnostics-II)와 운전자의 발쪽을 촬영하는 Foot Camera를 이용하여 통합 블랙박스 시스템을 구현하고자 한다. 지금까지의 블랙박스 시스템은 단순히 사고 시 영상을 촬영 저장하여 운전자에게 보여 주는 장치라면 현재 구현하려는 통합시스템은 블랙박스 자체에서 이동 통신을 통한 차량데이터 실시간 서버 전송 및 스마트 폰과 스마트 패드의 앱(App)으로 OBD-II와 메인서버와의 통신을 통해 사용자 차량의 현재 상태, 차량의 이상 유무, 소모품 교환 시기, 차량사고 시 영상 및 급발진 추정 시 차량상태, 위치, 이동거리, 운전자의 발쪽 영상 저장 및 재생 등 사용자가 필요로 하는 다양한 기능과 정보들을 블랙박스 하나로 통합하여 구현 할 것이다. 이 시스템이 개발되면 차량 관리에 서툰 여성 운전자들, 좀 더 체계적이고 손쉽게 내 차 정보를 원하는 운전자들과 전 세계 자동차 소비자들의 관심사인 급발진에 대한 사고 분석이 정확해 질 것으로 여겨진다.

• 대한족부족관절학회지
• /
• 제21권2호
• /
• pp.70-74
• /
• 2017

Fractures and fracture-dislocations of the ankle are caused by a variety of mechanisms. In addition to fractures, injuries of soft tissue, such as ligaments, tendons, nerves, and muscles may also occur. Among these, a tibialis posterior tendon injury is difficult to be identified due to swelling and pain at the fracture site. It is difficult to observe tibialis posterior tendon injury on a simple radiograph; it is usually found during surgery by accident. There are some studies regarding irreducible ankle fracture-dislocations due to interposition of the tibialis posterior tendon; however, to the best of our knowledge, there has not been any report about interposition of injured tibialis posterior tendon. Herein, we report a case of an irreducible fracture-dislocation of the ankle due to injured tibialis posterior tendon interposition that was observed intraoperatively, interrupting the reduction of ankle fracture-dislocation. We obtained satisfactory clinical result after reduction of the trapped tendon, fracture reduction, and internal fixation; therefore, we are willing to report this case with the consent of the patient. This study was conducted with an approval from the local Institutional Ethics Review Board.

• Physical Therapy Rehabilitation Science
• /
• 제12권2호
• /
• pp.161-166
• /
• 2023

Objective: The purpose of the study was to investigate the effect of shoe sole deformation on the muscle activity and balance of the lower extremities when standing on one foot. Design: Crossed-control group study Methods: A total of 18 healthy adults participated in this study. 9 participants with normal shoe and 9 participants with deformed in shoe out-soles (wear shoes) were included. Muscle activity of the tibialis anterior, fibularis longus and gluteus medius during one leg standing was measured using a electromyography. A balance board was used to evaluate balance ability when standing on one leg. The balance ability when standing on one leg was measured by the sway speed and distance of the center of gravity. Results: Muscle activity of the tibialis anterior, fibularis longus and gluteus medius was no significant difference between groups (P > 0.05). Balance ability when standing on one leg was significantly different from the group wearing normal shoes in all variables related to the sway distance and sway speed of the center of gravity. Conclusions: Through this study, the wear of the outer sole of the shoe indirectly confirmed the effect on the wearer's lower extremity muscle activity and balance ability when standing on one foot. These results of this study are expected to be used as basic data for future studies on shoe wear, lower extremity muscle activity and balance ability.

• 한국정보통신학회논문지
• /
• 제20권1호
• /
• pp.215-221
• /
• 2016

본 논문은 대량의 입력 신호를 받아들이기에 부족한 수십 개의 입출력 포트를 가지는 저가의 8비트 원칩 마이크로 컨트롤러로 키패드 인터페이스 회로와 RS485통신을 이용하여 평면에 25mm의 간격으로 2차원적으로 균일하게 배치된 1600개의 대용량 스위치 입력 신호를 초당 10회의 실시간으로 PC로 읽어 들이고, 얻어진 스위치 정보의 물리적 패턴을 분석한 보행 분석실험의 실례를 들어 스텝분석이나 물리적인 입력의 패턴 분석이 필요한 각종 스포츠, 댄싱, 오락분야 혹은 대량의 스위치 및 센서 입력이 필요한 산업분야 등에 사용되어질 수 있음을 보이고자 한다.

• The Journal of Korean Physical Therapy
• /
• 제5권1호
• /
• pp.61-69
• /
• 1993

It was performed to encourage for Physical Therapist to apply the theory of center of the human body and segments in clinical situations. This study was investigated literarily on center of the human body and segments. Methods which search for the center-2 types, that is, method using reaction broad and segmental method-was suggested. The center location difference of gravity in human body depends on individual character. Generally, the center location is in kent of 2nd sacrum, that is, at $55\%$ of height from foot. The center of each segment is on 'link'. In the first place we must how the weight of segment we can search for the center easily. Mean segment coater location of extremities is at $42.33\%$ from each proximal end, and mean center of head and trunk lies at $45\%$.

• Journal of the Korean Wood Science and Technology
• /
• 제37권5호
• /
• pp.459-464
• /
• 2009

This study was conducted to find the relationship between the moisture content and basic density of green lumber and the final moisture content of kiln dried lumber. The possibility of using a ultrasonic nondestructive testing technology was investigated. Four matched 2-foot long boards were kiln-dried for 12, 24, 36 and 48 hours. Twenty three slices were cut to examine the distribution of moisture content along the length. It was revealed that the green weight was a better estimator of the final moisture content of the kiln-dried board than the green moisture content. The standard deviations of the moisture contents of the slices were not correlated with the final moisture contents of the kiln-dried boards. The two ultrasonic devices used for this study were apparently good tools for NDT.

• 사상체질의학회지
• /
• 제10권1호
• /
• pp.143-160
• /
• 1998

연구목적 한국인 성인남녀를 대상으로한 신체분절에 관한 사상의학적 연구이다. 생체를 8-10분절로 분획하고 인체계측 및 침수법(Immersion Method) 및 평형측정판법(Reaction Board Method)을 이용하여 각 신체분절의 생체역학적 특성을 사상체질별로 객관화한다. 연구대상 연구대상자는 한국인 성인으로 남자 49명 여자 23명으로 총72명이며, 평균연령은 $29.4{\pm}8.54$세이고 태음인 30명, 소양인 17명, 소음인 25명이었다. 연구방법 인체계측항목중 신체분절길이 및 둘레와 골폭 및 스킨폴드 두께는 Lohman 등(1988)의 인체계측 부위 및 방법에 따라 42개 항목과 사초부위의 9항목으로 총 51개 항목을 측정하였다. 사지의 측정은 우측을 선택하였다. 침수법에 의하여 부피를 측정하고 밀도공식에 의하여 질량을 산출하였고, 평형측정판법에 의하여 무게중심을 구하였다. 연구결과 1. 인체계측항목에서 살펴보면 남자의 경우 둘레에서 체질별로 유의한 차이가 있었다. 2. 체적에서 살펴보면 남자의 경우 태음인과 소음인에서 유의한 차이가 있었고, 특히 두경부, 손, 발의 경우 태음인이 가장 작은 비율을 나타냈고 소음인이 가장 컸다. 3. 무게중심은 남자의 경우 소양인이 다른체질에 비하여 위에 있었다.

• 패션비즈니스
• /
• 제27권2호
• /
• pp.39-51
• /
• 2023

The purpose of this study was to effectively improve the thigh muscles of adult women working from home due to COVID-19. In this study, ten adult women working from home performed 1) an electromyography test, 2) a static balance test on a balance board, and a 3) dynamic balance test by squatting on a Bosu ball four times: before electric muscle stimulation (EMS), after EMS, after high-intensity circuit training (HICT), and after EMS plus HICT. For this test, EMS was attached to a medical knee support to manufacture an EMS knee band that could be easily worn regardless of the location. For the experiment, EMS(electric muscle stimulation) was attached to the medical knee protector to manufacture an EMS knee band that can be easily worn regardless of location, and was measured based on the right foot. The study results confirmed that in all tests (electromyography test, static balance test on the balance board, and dynamic balance test by squatting on a Bosu ball), thigh strength improved in the order of treatment before EMS, after EMS, after HICT, and after EMS plus HICT. The study showed that people working from home or with activity restrictions due to COVID-19 had better exercise effects when wearing the EMS knee band and performing HICT, even in a small space.

• 전기학회논문지
• /
• 제56권5호
• /
• pp.990-992
• /
• 2007

The purpose of this study is to develop a practical gait-event detection system which is necessary for the FES (functional electrical stimulation) control of locomotion in paralyzed patients. The system is comprised of a sensor board and an event recognition algorithm. We focused on the practicality improvement of the system through 1) using accelerometer to get the angle of shank and dispensing with the foot-switches having limitation in indoor or barefoot usage and 2) using a rule-base instead of threshold to determine the heel-off/heel-strike events corresponding the stimulation on/off timing. The sensor signals are transmitted through RF communication and gait-events was detected using the peaks in shank angle. The system could detect two critical gait-events in all five paralyzed patients. The standard deviation of the gait events time from the peaks were smaller when 1.5Hz cutoff frequency was used in the derivation of the shank angle from the acceleration signals.

• 대한인간공학회지
• /
• 제34권2호
• /
• pp.167-177
• /
• 2015

Objective: The objective of this research is to develop evaluation checklist for personal office furniture and apparatus to shape comfortable and efficient worksite for workers' welfare improvement, productivity enhancement and labor force preservation, and to identify office work environment by applying the checklist. Background: Because most office workers work using computers in a sitting posture, the ratio of office workers among total musculoskeletal disorders patients is forecast to increase. In this regard, an effort to prevent and manage such musculoskeletal disorders is required. Method: This research developed evaluation checklist for personal office furniture and apparatus by examining 25 domestic and international ergonomic literature and anthropometric data. This research carried out a fact-finding survey targeting the A Office and B Office of one public agency using the checklist. Results: Although, the checklist items on desks, chairs, computers and other goods conformed to the checklist standards, the following items did not conformed: desk height adjustment, seat board depth adjustment, lumbar support depth, foot rest, wrist rest, mouse tray, headset, speaker phone and Bluetooth. Conclusion: The evaluation checklist for personal office furniture and apparatus and fact-finding survey results are considered to be used as basic data for office work environment and workers' welfare improvement. Application: The information drawn from this research can be helpful to manufacturers' design and manufacture of ergonomic furniture and apparatus.