• 전자공학회논문지SC
• /
• 제45권3호
• /
• pp.1-11
• /
• 2008

본 논문은 모바일 단말기에 탑재된 카메라를 이용하여 정지영상을 획득할 때 발생할 수 있는 blur현상을 3축 가속도 센서를 이용하여 실시간 보정 할 수 있는 방법을 제안한다. Blur현상은 획득한 이미지에서 발생하는 번짐 효과이다. 소형의 모바일 단말기는 사용자의 미세한 손 떨림에도 크게 흔들릴 수 있기 때문에 blur현상이 크게 나타나며, 이를 적절하게 보정할 수 있는 알고리즘이 필요하다. 본 논문에선 3축 가속도센서를 진자운동에 적용하여 출력결과의 신뢰성을 확보하였고, blur현상을 Uniform 분포와 Gaussian 분포로 모델링하였다. 실험을 통하여 실제 blur 현상이 Non-Gaussian 형태로 모델링됨을 확인하였고, 이 blur모델의 역과정인 deblurring 특성함수를 설계하였다. 이 특성함수에 3축 가속도센서에서 발생하는 미세한 떨림 정보를 적용하여 실험 이미지를 deblurring한 결과, 이미지 blur현상을 적절하게 보정할 수 있었다.

• 대한전자공학회논문지SD
• /
• 제47권4호
• /
• pp.1-6
• /
• 2010

정지해 있는 물체가 디스플레이 될 때는 상이 선명하지만 움직이는 물체가 디스플레이 될 때는 물체의 가장자리가 번져 보이는 Motion Blur현상이 일어난다. 이러한 문제점을 개선하기 위하여 본 논문에서는 XUP Virtex-II Pro Development System을 이용하여 Virtex-II Pro XUP XC2VP30 보드에 Motion Blur를 줄이는 Overdrive 기술을 구성하는 것을 목표로 하였다. 구현된 플랫폼은 하드웨어 IP로 구현하였으며 어플리케이션 및 모델 데이터 인터페이스는 소프트웨어에서 처리하도록 하였다. 본 설계에서는 임의의 동영상 모델을 이용하여 동영상의 이동 속도(Pixel/Frame)에 따른 Blur의 정도와 기존의 Overdrive를 제어하였을 경우 발생하는 역잔상을 개선하였고, 동영상에서 보다 선명한 화질이 구현될 수 있음 보여주었다.

• 한국가구학회지
• /
• 제19권1호
• /
• pp.44-54
• /
• 2008

The blur phenomenon, in which the boundaries of fields or roles become vague, has become an important concept of design in the 21st century. In furniture design, the physical boundary between furniture and space and that between space and furniture has been broken down and their meaning tends to be redundant. This concept was begun by a variety of furniture designers who led the trends about 30 years ago. A progressive exhibition titled ${\ulcorner}$Living Tomorrow${\lrcorner}$, which was included in the Koln International Mobelmess from 1968 to 1970, showed that the blur phenomenon in furniture design has never actually been novel. These exhibitions and the works exhibited in the events are still recognized as progressive examples that proposed an avant-garde concept of life. They are in line with the current furniture design based on spatial concepts, which has been created by the blur phenomenon. The purposes of this study are to determine the cases of furniture design that enable the so-called spatial functions beyond the simple functions of seating, use, and display, from those of furniture design and to research their characteristics. In this study, furniture based on spatial concepts means furniture that creates 3D spaces consisting of the floor, walls, and ceiling by the blur phenomenon that occurs from the spaces among these pieces of furniture. The organization of this study is as follows; In Chapter 2, a background on the generation of furniture design based on spatial concepts is described based on the research literature of this socio-cultural phenomena. In Chapter 3, the cases of relevant furniture design redescribed. In Chapter 4, the collected cases are analyzed and their characteristics described. In Chapter 5, Chapter 1 to Chapter 4 are summarized and conclusions are given. In addition, future research is proposed.

• 전기학회논문지
• /
• 제63권9호
• /
• pp.1281-1285
• /
• 2014

Recently, as the wide spread of smart phone, pico projector which is used at the smart phone is appeared as a portable display device. In this paper, among several pico projectors, laser beam scanner module is dealt with in which laser is used as light source, and mems-mirror is used as optical panel. In this device, screen image quality is a special issue, and blur effect is a typical adverse effect to the quality of this device. So the enhancement of this blur effect has an important factor of the quality of the device. The definition of the blur and the main source of the blur are studied and the simulation results and way of improvement are also suggested.

• 한국실내디자인학회논문집
• /
• 제16권2호
• /
• pp.262-269
• /
• 2007

The blur phenomenon obscuring the boundary between the field of designers and that of users may be the key paradigm in the 21st century. However, we observed a number of chair design cases that could be considered as the results of blur pheonomenon in the furniture design field from mid 1960s. The backgrounds include the repulsion against the uniform functionalism, deliberation on the life in the future and the development of plastic materials and their processing methods. Under such backgrounds, the designers pursued the new and futuristic furniture design. In that process, what is about the "freedom" that the consumers as well as the designers should have in using the furniture was the important concept. This concept enabled the creation of chair design inducing the participation of consumers. They created various kinds of shapes, functions and structures that the consumers became interested in as if they had fun with toy blocks by mainly using the new material "plastic". In a formative aspect, the entire shape is classified into the organic shape and geometric shape. The unit types are divided into two kinds; type that the unit of simple shape is repeated only with size difference and irregular combination type of the units comprised of more than two shapes. In the functional aspect, some cases showed the transformation and expansion of the function more variously. Other cases changed the function of chairs to tables, cabinets, or objects. In the structural aspect, on the basis of the method assembling each unit, one method is to assemble using the hardware and the other is to assemble only with intrinsic units of chair. The chair design created by the blur phenomenon between the designers and the users as described above causes the blur phenomenon between the furniture and the space where the furniture is installed. Accordingly, it is expanding the furniture design sphere including the case that the furniture is not selected as the rifle article depending on the characteristics of interior space but it becomes the element leading the characteristics of space. This study aims to estimate the change of interior space and the furniture that my cause the blur phenomenon by examining the cases above appropriate for the paradigm of the 21st century. Furthermore, this study will enable the discussion oil the directions of future furniture design based on its results.

• 한국콘텐츠학회논문지
• /
• 제19권5호
• /
• pp.268-279
• /
• 2019

본 연구는 외식업체 빅 블러 현상과 키오스크 도입에 따른 이용고객의 주관적 인식을 파악하고자 서울지역 외식경영학과 대학원생을 대상으로 Q방법론을 적용하였다. 분석결과, 5가지 유형으로 도출되었다. 구체적으로, 제 1유형(N=6) : 빠른 결재와 다양한 주문 선호 형 (Fast payment and various order preference types), 제 2유형(N=6) : 적립 할인 혜택 선호 형 (Earning discount benefits preference type), 제 3유형(N=3) : 간편 주문 선호 형 (Simple order preference type), 제 4유형(N=2) : 직원 서비스 선호 형 (Employee service preference type), 제 5유형(N=3) : 안전 결재 선호 형 (Safety payment preference type)으로 각 각 독특한 특징의 유형으로 분석되었다. 향후 외식업체 빅 블러 현상에 관한 연구에서는 많은 문헌과 실증연구를 바탕으로 보다 세밀한 Q방법론적인 질문과 분석기법으로 수정 보완하여, 응답자들의 다양한 의견을 보다 구체적이며 객관적으로 분석하고자 한다.

• 패션비즈니스
• /
• 제24권4호
• /
• pp.144-160
• /
• 2020

Today, the development of innovative technologies is accompanied by changes in the industrial structure and the Big Blur phenomenon, where the boundaries in various fields are blurred. The purpose of this study was to view the Big Blur phenomenon as a big paradigm shift in the 21st century and derive environmental changes and characteristics of the Korean fashion market. The research method included an analysis of the fashion brands after 2015. Through this study, we intended to establish a framework for understanding the changes in the fashion market from the perspective of Big Blur and discuss the direction of brand marketing. The research results showed the hyperlinks, connectivity, openness, homeostasis, synchronicity, mobility, interactivity, and brand experience of online and offline spaces beyond the boundaries of virtual space and offline physical spaces such as online physical and spatial viewpoints. It also showed the characteristics. The characteristics from the socio-cultural point of view were characteristic of diversity, mixture, coexistence, composability, and pluralism beyond the traditional socio-cultural and regulatory scopes. Hip hop fashion, street fashion, unisex, genderless, androgynous fashion, and kid fashion are the backbone of the Big Blur and are becoming important factors in fashion. The characteristics of the market and economic viewpoint are prosumers that play roles both as producers and consumers. It shows the extensibility of consumers as producers, the cohesiveness of producers and consumers, the cooperation, and the interconnectivity.

• 방송공학회논문지
• /
• 제21권2호
• /
• pp.200-209
• /
• 2016

본 논문에서는 촬영 시 발생하는 블러 현상을 효율적으로 제거하기 위해 IMU 센서와 노출시간이 길고, 짧은 두 영상을 이용한 비균일 디블러 알고리즘을 제안한다. 종래 센서 정보를 이용한 블러 커널 추정 기법들은 센서 정보의 한계로 인해 성능이 만족스럽지 못하다. 그 한계를 극복하기 위해 우리는 노출시간이 서로 다른 여러 영상들을 이용한 커널 개선 과정을 제안하여, 추정된 커널의 정확도를 향상시킨다. 또한 종래 비균일 디블러 기법들이 블러 커널이 커질수록 심한 화질 열화를 겪는 문제점을 해결하기 위해 본 논문은 호모그래피 기반 잔여 디콘볼루션을 제안하여 디콘볼루션 과정에서 발생하는 링형 현상과 같은 화질 열화를 최소화한다. 실험 결과를 통해 제안 알고리즘의 화질이 기존 기법에 비해 주관적/객관적으로 현저하게 우수함을 볼 수 있다.

• 전력전자학회논문지
• /
• 제14권1호
• /
• pp.8-14
• /
• 2009

현재 사용하고 있는 LCD(Liquid Crystal Display) Backlight용 램프는 주로 CCFL(Cold Cathod Fluorescent Lamp)과 EEFL(External Electrode Fluorescent Lamp)이 사용되고 있다. 하지만 이 램프는 수은을 사용하여 RoHS(the Restriction of e use of certain Hazardous Substances in electrical and electronic equipment)규제가 점점 강화되면서 사용이 제한되고 있으며, 이에 따라 수은을 사용하지 않는 램프의 제작이 불가피해지고 있다. 또한 LCD TV는 CRT와 PDP와는 다른 LCD만의 Hold-type 특성과 LC(Liquid Crystal)의 응답속도로 인하여 Motion Blur현상이 나타나는 단점이 있다. 본 논문에서는 RoHS 규제를 만족시키는 무수은 면광원 램프를 구동하기 위한 인버터를 제안한다. 제안한 인버터는 포워드 방식을 사용하여 반도체 소자 및 자기 소자의 수를 줄여서 구동회로가 간단하다. 또한 면광원 램프를 세로방향으로 6블록으로 나누어 스캔구동을 하여 Motion Blur현상을 저감 시켰다. 끝으로 실험을 통하여 제안한 인버터의 유용성을 입증하였다.

• 한국멀티미디어학회논문지
• /
• 제19권4호
• /
• pp.774-779
• /
• 2016

The conventional methods using color signal for tracking the movement of the object require a lot of calculation and the performance is not accurate. In this paper, we propose a method to effectively track the moving objects using the depth information from a depth camera. First, it separates the background and the objects based on the depth difference in the depth of the screen. When an object is moved, the depth value of the object becomes blurred because of the phenomenon of Motion Blur. In order to solve the Motion Blur, we observe the changes in the characteristics of the object (the area of the object, the border length, the roundness, the actual size) by its velocity. The proposed algorithm was implemented in the simulation that was applied directly to the tracking of a golf ball. We can see that the estimated value of the proposed method is accurate enough to be very close to the actual measurement.