• 제목/요약/키워드: Blue light cut

검색결과 26건 처리시간 0.02초

Development of Blue Light Cut Films Using a Roll-to-Roll Nano Micro Coating System

  • Hwang, Joong Kook;Shina, Hoon-Kyu;Chang, Sang-Mok
    • Transactions on Electrical and Electronic Materials
    • /
    • 제17권3호
    • /
    • pp.178-181
    • /
    • 2016
  • In this study a coating experiment was performed to fabricate blue light cut films, which represent a 390~430 nm cut off rate of more than 40% and a transmittance rate of more than 90%, using a roll-to-roll nano micro coating system. The study also analyzed the characteristics of the blue light cut films. Thus, the hardness, which is more than 3H, is ensured through fabricating films using a Sol-Gel process that will determine the proper hardness level. Also, the experiment shows excellent results by cutting blue light through a mixing blue light powder.

해당화의 종자 발아 연구 (Improvement of Seed Germination in Rosa rugosa)

  • 이지연;이자현;기광연;김성태;한태호
    • 원예과학기술지
    • /
    • 제29권4호
    • /
    • pp.352-357
    • /
    • 2011
  • 장미의 발아율은 약 20% 정도이고 과피 안에 발아억제물질이 존재하며 물 투과성이 어렵기 때문에 육종의 한계가 있다. 본 연구는 장미속 식물인 해당화의 종자를 이용하여 위하여 $25^{\circ}C$ 배양실에 16시간 광주기 하에서 기내배양을 수행하였다. 해당화 종자를 half-cut하여 치상 방향에 따른 발아율을 확인하기 위하여 치상방향을 달리하여 2주간 배양하였다. 종자의 절단면이 배지에 닿지 않도록 치상하였을 경우 모두 발아가 되었으나, 반대로 치상한 경우에는 전혀 발아되지 않았다. Intact 종자와 half-cut된 종자의 수분 후 경과일수와 저온 요구도에 따른 발아율을 비교하기 위해 2주 동안 배양한 결과 intact 종자는 발아되지 않았으며 수분 후 경과 90일된 half-cut 종자에서는 저온처리의 유무에 관계없이 100% 발아하였으며, 수분 후 경과일수가 지날수록 발아율이 높았다. 또한 half-cut 종자를 적색, 청색, 흰색, 황색, 녹색 LED 하에서 배양한 결과 1주 후에 청색 LED에서 90%로 가장 높은 발아율을 보였다. 본 연구에서는 다양한 실험을 수행하여 층적 저온처리 없이도 해당화의 발아기간을 성공적으로 단축시켰고, 종자의 half-cut 방법을 장미의 육종연구에 적용한다면 더 효율적인 발아연구 및 육종연구를 할 수 있을 것이라 생각된다.

유방 탄성초음파의 Color overlay pattern에 대한 유용성 (Usefulness of Color-overlay Pattern of Breast Elastic Ultrasonography)

  • 안현;임인철
    • 한국방사선학회논문지
    • /
    • 제11권5호
    • /
    • pp.401-406
    • /
    • 2017
  • 유방암 발생률이 해마다 증가하여 그에 따라 유방 종양을 진단하는 검사인 조직검사의 횟수도 같이 증가하고 있다. 조직검사는 침습적 검사로써 환자들의 불안감과 감염, 출혈 등의 부작용이 발생하고 있다. 본 연구에서는 유방 병변 환자를 대상으로 회색조 초음파와 탄성초음파검사 모두 실시한 69명을 대상으로 회색조 초음파는 BI-RADS Category에 따라 분류하고, 탄성초음파검사는 횡파의 전파 속도를 환산하여 나타낸 kPa값을 Color overlay pattern으로 분류하였다. 민감도와 특이도의 합이 가장 높은 최적의 Cut-off value는 54.70 kPa로 나타났다. Color overlay pattern에서 Dark Blue 42명, Light blue ~ Red 27명으로 분류된 결과와 BI-RADS Category 분류 결과인 양성 40명, 악성 29명으로 분류된 결과가 유사하다. 따라서 Color overlay pattern에서 Dark Blue에 분류될 경우에는 양성, Light blue ~ Red에 분류될 경우에는 악성으로 의심할 수 있을 것으로 판단된다. 결론적으로 유방 탄성초음파는 무분별한 유방 조직검사의 횟수를 줄이고 양성종양과 악성종양을 구분하는데 획기적인 역할을 할 것으로 사료된다.

갑상선 탄성 초음파 검사 시 칼라 오버레이 패턴의 유용성 (Usefulness of Color-overlay Pattern of Thyroid Elastic Ultrasonography)

  • 박지연;조평곤
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제45권4호
    • /
    • pp.341-346
    • /
    • 2022
  • The color overlay pattern of thyroid shear wave elastography applied in this study distinguishes benign and malignant nodules based on the optimal cut-off value of 74.2 kPa. From august 2021 to september 2021, thyroid ultrasound and elastography were performed on 57 patients with thyroid lesions using an ultrasound device RS85 prestige (Samsung Medison, Korea) and a 2-14 MHz linear transducer. In addition, the results of classification by K-TIRADS for each thyroid nodule and the results of classification by color overlay pattern according to the kPa value of acoustic ultrasound were compared and analyzed. In the color overlay pattern, the results classified as 40 people from dark blue to light blue and 17 people from green to red were similar to the K-TIRADS category results, which were classified as 42 benign and 15 malignant. Between blue and light blue, benign, and between green and red, malignant. If the shear wave elastography method is applied before the fine-needle aspiration cytology of the thyroid nodule is performed, the differential diagnosis of thyroid tissue from benign and malignant can be predicted in advance, and it will help to reduce unnecessary invasive tests.

MOCVD로 성장된 In$_{x}$Ga$_{1-x}$N MQW 구조의 청색 발광당이오드의 특성 (Characteristics of a Blue Light Emitting Diode with In$_{x}$Ga$_{1-x}$N MQW Structure Grwon by MOCVD)

  • 이숙헌;배성범;태흥식;이승하;함성호;이용현;이정희
    • 전자공학회논문지D
    • /
    • 제35D권8호
    • /
    • pp.24-30
    • /
    • 1998
  • A blue LED of $In_{x}Ga_{1-x}N$ multiple quantum well structure which had the blue emission spectrum of donor-acceptor pair transition generated form Si-Zn co-doped $In_{x}Ga_{1-x}N$ active layer, was fabricated. The $In_{x}Ga_{1-x}N$ MQW heterojunction LED structure was grown by MOCVD on the sapphire substrate with (0001) surface orientation at 800.deg. C. The fabricated LED exhibited forward cut-in voltage of 4~4.5V and reverse breakdown voltage of -13V. Its optical chracteristics showed that the center wavelength of peak emission occurred at 460nm and the optical intensity was increased linearly with respect to the injected electrical current above 5mA.

  • PDF

전자 나침반과 적외선 광원 추적을 이용한 이동로봇용 위치 인식 시스템 (Localization System for Mobile Robot Using Electric Compass and Tracking IR Light Source)

  • 손창우;이승희;이민철
    • 제어로봇시스템학회논문지
    • /
    • 제14권8호
    • /
    • pp.767-773
    • /
    • 2008
  • This paper presents a localization system based on the use of electric compass and tracking IR light source. Digital RGB(Red, Green, Blue)signal of digital CMOS Camera is sent to CPLD which converts the color image to binary image at 30 frames per second. CMOS camera has IR filter and UV filter in front of CMOS cell. The filters cut off above 720nm light source. Binary output data of CPLD is sent to DSP that rapidly tracks the IR light source by moving Camera tilt DC motor. At a robot toward north, electric compass signals and IR light source angles which are used for calculating the data of the location system. Because geomagnetic field is linear in local position, this location system is possible. Finally, it is shown that position error is within ${\pm}1.3cm$ in this system.

Luminance와 동공크기 변화에 따른 렌즈에서 UV 차단효과 연구 (Study of UV-cut Effect by Luminance and Size of pupil in lens)

  • 김용근
    • 한국안광학회지
    • /
    • 제6권2호
    • /
    • pp.17-21
    • /
    • 2001
  • 렌즈에서 UV-A 선 차단 효율을 평가하기 위해 투과율에 의한 가시광 영역 luminance와 luminance에 의한 동공크기를 분석하였다. Luminance(L)에 따른 동공크기(${\Phi}$)는 ${\Phi}=d-e{\cdot}tanh(f{\cdot}logL)$로 주어지고, 동공 크기 (r)에 따른 투과효율은 $T_r(r)=1-gr^2+hr^4$으로 주어진다. $320{\sim}400nm$ 파장 영역인 UV-A에 대한 절대 차단 효율 ${\alpha}$와 제거 지수 $b=(1-{\alpha}){\times}100%$의 식을 유도하였다. UV-cut Lens, CR-39, red color 및 blue color 렌즈에 대한 ${\alpha}$ 값은 각각 0.018, 0.31, 0.273 및 0.153을 얻었고, b값은 각각 98, 69, 72 및 85%을 얻었다.

  • PDF

단일처리 후 LEDs 광도에 따른 절화국의 줄기 신장과 광합성반응 (Stem Elongation and Photosynthesis Response of Cut Chrysanthemum under Different LEDs Light Intensity)

  • 정성우
    • 농업생명과학연구
    • /
    • 제44권5호
    • /
    • pp.23-27
    • /
    • 2010
  • 초장은 절화국의 외적 품질을 결정하는 매우 중요한 요소이다. 본 실험은 단일처리 후 광량의 차이에 따른 절화국화 광합성 효율과 줄기 신장에 미치는 영향을 알아보기 위하여 growth chamber내에서 수행되었다. 정식 7일 후 단일처리 (day/night, 11/13h)를 개시하였으며 이때 광량은 LEDs array (blue+red)를 이용하여 60, 100, 140, 그리고 $180mol{\cdot}m^{-2}{\cdot}s^{-1}$로 각각 유지하였다. 본 실험의 결과, 광도의 증가에 따른 순 광합성률은 꾸준히 증가하는 직선 회귀의 상관관계가 있었다. 광도의 차이가 꽃눈 분화의 시기에는 영향을 미치지 않았다. 초장, 엽면적, 그리고 건물중 등의 생육은 광도의 증가에 따라 증가 하였으나 140과 $180mol{\cdot}m^{-2}{\cdot}s^{-1}$에서는 처리 간 차이가 나타나지 않았다. 이상의 결과에서 LEDs array를 이용한 $140mol{\cdot}m^{-2}{\cdot}s^{-1}$이상의 광도는 절화국의 줄기 신장에 효과가 없는 것으로 판단되었으며 광도의 증가에 따른 순 광합성률의 증가가 생육의 증가와 일치하지는 않음을 알 수 있었다.

사과 자엽의 기내 식물체 재분화와 배양 광조건 및 절편체 극성과의 관계 (Correlation between in vitro Plant Regeneration of Apple Cotyledon and Light Condition, Polarity of Explant)

  • 안현주;예병우;임용표;신용억
    • 식물조직배양학회지
    • /
    • 제27권1호
    • /
    • pp.19-23
    • /
    • 2000
  • 사과 자엽조직으로부터 기내에서 식물체를 재분화시키는 데에 있어서 배양 광조건 및 절편체 극성과의 관계를 살펴보고자 사과‘Fuji’품종의 자엽을 재료로하여 광조건 및 광질을 달리하여 배양하였고, 또한 여러 가지 형태의 절편체를 사용하여 시험을 수행하였다. 배양환경조건 중 광조성에 따른 신초 재분화율을 본 결과 배양 초기 10일간 암배양한 후 명 배양한 처리구에서 가장 높은 재분화율을 나타내었으며, 배양중기의 암처리는 효과가 없었다. 광질별로 비교할 때 전처리로 4일간 암배양한 후 청색광을 조사한 처리구에서 높은 신초 재분화율을 나타내었다. 신초 재분화 유기와 절편체 극성과의 관계를 보면 모든 신초의 형성은 절제된 자엽의 기부 끝쪽에서만 이루어졌다. 즉, 기부쪽 절편체의 말단부 절단면에서보다는 기부쪽 절편체와 말단 절편체의 기부쪽 절단면에서 식물체의 재분화가 이루어짐을 알 수 있었다. 신초 유기는 배축의 기부쪽 자엽 절편체 에서 매우 높게 나타난 반면 자엽의 말단부위에 가까운 곳에서는 현저히 감소하였다.

  • PDF

카네이션 'White Liberty'의 염색화에 따른 인공염료가 절화수명에 미치는 영향 (Effect of Artificial Dyes on Vase Life in Cut Dianthus Caryophyllus 'White Liberty' Dyed Flower)

  • 정재간;구본순
    • 한국화예디자인학연구
    • /
    • 제42호
    • /
    • pp.23-35
    • /
    • 2020
  • 스탠다드형 카네이션은 매스플라워로써 플라워디자인에 많이 이용되고 있으나 화색이 다양하지 못해 이용에 한계가 있다. 본 연구는 이용에 한계가 있는 스탠다드형 카네이션을 사용하여 최적 염색 상태의 처리 조건을 찾고 더 나아가 염색 카네이션의 화훼장식에서 활용도를 높이고자 수행하였다. 스탠다드형 카네이션 'White Liberty'를 이용하여 6가지 염료별로 4가지 화합물 처리에 따른 염색실험을 수행하였다. 실험은 염료 6가지 색[black(2012), lavender(2200), lime Green(2315), light blue(2386), christmas red(2506), yellow(2375) (Robert Koch Industries INC, USA)]과 4가지 화합물 처리(증류수, 4% 에탄올, 3% 설탕, 100mg·L-1 구연산)를 사용하였다. 결과적으로 6가지 염료 모두 3% 설탕과 100mg·L-1 구연산 처리가 빠른 염색과 염색정도에 우수한 경향을 나타냈다. 그러나 절화수명은 black과 lavender 염료를 제외한 나머지 염료에서 대조구(7일)와 유사한 경향을 보였다.