• 대한전자공학회논문지SD
• /
• 제39권8호
• /
• pp.17-23
• /
• 2002

전자빔 증착 장비를 이용하여 SrS:CuCl TFEL 소자를 제작한 후, 발광특성을 조사하였다. 형광체 모체는 SrS 분말을 사용하였고, 발광중심체로는 CuCl 분말을 0.05 ~ 0.6 at% 범위에서 첨가하였다. 증착 온도 500℃, 전자빔 전류 20 ~ 40 mA 및 증착율 5 ~ 10 /sec의 조건에서 형광층 두께를 6000 으로 증착시켰다. CuCl 농도가 낮을 때에는 monomer, dimer, trimer 및 tetramer 발광센터에 의한 청색 발광을 확인할 수 있었으나 휘도가 낮았다. CuCl 농도가 높을 때에는 dimer와 trimer 발광센터에 의한 밝은 녹청색 빛을 방출하였다. 최적의 발광특성은 CuCl 농도를 0.2 at% 첨가한 SrS:CuCl TFEL 소자에서 관찰되었으며, 문턱전압, 휘도(L/sub 40/), 효율(η/sub 20/) 및 CIE 색좌표는 각각 55 V, 728 cd/㎡, 0.49 lm/W 및 (0.21, 0.33)을 나타내었다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제31권3호
• /
• pp.207-215
• /
• 2009

Purpose: The aim of the present study is to evaluate the long term bone healing after horizontal ridge augmentation using auto block bone graft for implant installation timing. Materials and Methods: Five Beagle dogs(which were 14 months old and weighted approximately 10kg). In surgery 1(extraction & bone defect), premolars(P2, P3,P4) were extracted and the buccal bone plate was removed to create a horizontally defected ridge. After three months healing, in surgery 2(ridge augmentation). Auto block bone grafts from the mandibular ramus were used in filling the bone defects were fixed with stabilizing screws. The following fluorochrome labels were given intravenously to the beagle dogs: oxytetracycline 1week after the surgery, alizarin red 4 weeks after the surgery, calcein blue 8 weeks after the surgery. The tissue samples were obtained from the sacrificed dogs of 1, 4, 8, 12, 16 weeks after the surgery. Non-decalcified sections were prepared by resin embedding and microsection to find thickness of $10{\mu}m$ for the histologic examination and analysis. Results: 1. We could achieve the successful reconstruction of the horizontal bone defect by auto block bone graft. The grafted bone block remained stable morohologically after 16 weeks of the surgery. 2. In the histologic view. We observed osteoid tissue from the sample $4^{th}$ week sample and active capillary reconstruction in the grafted bone from the $12^{th}$ week sample. Healing procedures of auto bone grafts were compared to that of the host bone. 3. Bone mineralization could be detected from the $8^{th}$ week sample. 4. Fluorochrome labeling showed active bony changes and formation at the interface of the host bone and the block graft mainly. Bony activation in the grafted bone could be seen from the $4^{th}$ week samples. Conclusions: Active bone formation and remodeling between the grafted bone and host bone can be seen through the revascularization. After the perfect adhesion to host bone, Timing of successful implant installation can be detected through the ideal ridge formation by horizontal ridge augmentation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1466-1468
• /
• 2001

For the full color organic electro-luminescent device, essentially, red, green, and blue emissions are required. But red emission is not to reach minimum level of practical use 31[lm/W]. In order to optimize color purity and power consumption requirements, it is important for the materials development efforts to search for improvements in red emission effisiency. In this study, the bis(8-oxyquinolino)zinc II ($Znq_2$) were synthesized successfully from zinc chloride($ZnCl_2$) as a initial material. Then, we fabricated red organic electroluminescent device with a dye(DCJTB)-doped and inserted $Znq_2$ between emission layer and cathode layer for increasing EL efficiency. The hole transfer layer is a N,N'-diphenyl-N,N'-bis-(3-methyl phenyl) -1,1'-diphenyl-4.4'-diamine(TPD), and the host material of emission layer is $Znq_2$. For the inserting of $Znq_2$, efficiency increased.

• Transactions on Electrical and Electronic Materials
• /
• 제11권3호
• /
• pp.145-148
• /
• 2010

White organic light emitting devices were fabricated to improve the stability through a structural change using the two peak emission method. The fabricated devices were composed of indium tin oxide (100 nm)/ $\alpha$-NPD (30 nm)/4,40-bis(2,20-diphenylvinyl)-1,10-biphenyl (DPVBi, d: variable)/DPVBi: Rubrene (40 nm)/2,9-dimethyl-4,7-diphenyl-1,10-phenanthroline(5 nm)/ $Alq_3$(5 nm)/ Al (100 nm). A DPVBi for blue emissions was used as the host material in the emitters. The doping concentration of the Rubrene was fixed at 2.0% (by weight). The white emission with Commission Internationale De L'Eclairage coordinates of (0.3342, 0.3439) occurred at 14 V with a thickness d of 1 nm. It was insensitive to the drive voltage, and the devices had a maximum luminance of $211\;cd/cm^2$. At 19 V, the current density and maximum external quantum efficiency were $173\;mAcm^2$ and 0.478%, respectively.

• 전자공학회논문지D
• /
• 제34D권2호
• /
• pp.27-37
• /
• 1997

Photoluminescent and cathodoluminescent charcteristics of inorganic luminescent materials were investigated ot develop possible phosphors for thin film electroluminescent (TFEL) device applications. Mg, Zn, and Photoluminescent and cathodoluminescent charcteristics of inorganic luminescent materials were investigated ot develop possible phosphors for thin film electroluminescent (TFEL) device applications. Mg, Zn, and $Si_3N_4$ powders were used to synthesize $(Mg_xZn_{1-x})SiN_2$ host materials. $Tb_4O_7$ and $Eu_2O_3$ powdrs were added as luminescent centers. Very sharp emission spectra of $Tb^{3+}$ ions were observed from $Mg._5Zn._5SiN_2:Tb$ sampels sintered at $1400^{\circ}C$ for an hour and the maximum intensity of emission spectra occured at wavelength of 550nm (green light). Synthetic conditions of $(Mg_xZn_{1-x})SiN_2:Eu$ phosphors were optimized for the hghest luminescence. The Eu concentrations were varied from 0.2% to 1.6%. Before firing, the powders were mixed using ballmills, methanol, acetone, or D.I. water. The Mg/Zn ratio also were varied from x=0.3 to x=0.7. The maximum PL intensity was obtained from a sample with 1.2% Eu concentration and the powder was mixed with methanol and dried before firing. The maximum intensity of the emission spectra occurred t the wavelength of 470nm(blue light). TFEL devices fabricated by using sputter deposition of $(Mg._3Zn._7)SiN_2:Eu$ phosphor layer showed yellowish white emission at the phosphor field of 2MV/cm.

• 한국세라믹학회지
• /
• 제37권2호
• /
• pp.111-116
• /
• 2000

700nm red emission(3F3longrightarrow3H6) in Tm3+ ion with 800 nm(3H6longrightarrow3H4) excitation via upconversion process has been reported only in host materials which have low phonon energies such as halide crystals. However, we observed 700nm and 480nm(1G4longrightarrow3H6) upconverted emission with 800nm excitation in several oxide glasses which has never reported. With spectroscopic analyses and lifetime measurements of each nergy level of Tm3+ ion doped in various oxide glasses, following mechanisms are suggested. For red upconversion, upconversion mechanism changed with Tm3+ concentration. While direct excitation up to 3F3 level via anti-Stokes excitation was dominated at low concentration, two-step excitation via 3H6longrightarrow3H4 and 3F4longrightarrow3F3 transitions was dominated at high concentration. For blue upconversion, two step excitation mechanism up to 1G4 level was suggested as follows : electrons are exciated up to 3H5 with direct excitation with pumping light up to 3H4 followed by multiphonon relaxation, and then additional reabsorption of pumping light excites electrons up to 1G4.

• 전자공학회논문지D
• /
• 제35D권11호
• /
• pp.55-61
• /
• 1998

정공 전달 중합체인 Poly(N-vinylcarbazole) (PVK)와 전자전달 유기물 재료인 2-(4-biphenyl)-5-(t-butyl-phenyl)-1,3,4-oxadiazole (Bu-PBD)에 발광 유기물 색소 Coumurine 6, TPB, Rhodamine B를 각각 도핑한 단층박막 유기물 전기발광 소자를 제작하였다. 스핀 코팅 방법에 의한 단층 구조와 가용성 재료의 사용으로부터 소자제작이 간단하였다. 활성영역은 인듐주석산화물(ITO) 과 알루미늄 전극 사이에 놓인 단층으로 구성하고 있다. 이러한 구조에서 전자와 정공의 전하가 각 전극에서 PVK : Bu-PBD 활성층으로 주입된다. 전압을 인가한 후 발광된 빛의 색은 각각 TPB, C6, Rhodamine B의 유기물 색소에 의해 481nm, 500nm, 585nm 파장을 갖는 푸른색, 초록색 및 오렌지색을 나타내었다. PVK유기물은 다른 발광색을 갖는 유기물 색소를 분자 적으로 도핑 함으로서 주요한 중합체로서 사용될 수 있다. 그리고 전기발광색은 전체 가시광선 파장 내로 조절될 수 있다.

• 한국표면공학회지
• /
• 제51권5호
• /
• pp.271-276
• /
• 2018

The effects of activator ion on the structural, morphological, and optical properties of $LaNbO_4:RE^{3+}$ (RE = Dy, Dy/Sm, Sm) phosphors were investigated. X-ray diffraction patterns exhibited that all the phosphors showed a monoclinic system with a main (112) diffraction peak, irrespective of the concentration and type of activator ions. The grain size showed a slightly decreasing tendency as the concentration of $Sm^{3+}$ ions increased. The excitation spectra of the $LaNbO_4:Dy^{3+}$, $Sm^{3+}$ phosphor powders consisted of a strong charge transfer band centered at 259 nm in the range of 220-290 nm and five weak peaks. The emission spectra of the $La_{0.95}NbO_4$:5 mol% $Dy^{3+}$ phosphors exhibited two intense yellow and blue bands centered at 575 nm and 479 nm respectively, which resulted from the $^4F_{9/2}{\rightarrow}^6H_{13/2}$ and $^4F_{9/2}{\rightarrow}^6H_{15/2}$ transitions of $Dy^{3+}$. As the concentration of $Sm^{3+}$ was increased, the intensity of the yellow emission band was gradually decreased, while those of orange and red emission bands centered at 604 and 646 nm began to appear and reached maxima at 5 mol%, and then decreased rapidly with further increases in the $Sm^{3+}$ concentration. These results indicated that white light emission could be realized by controlling the concentrations of the $Dy^{3+}$ and $Sm^{3+}$ ions incorporated into the $LaNbO_4$ host crystal.

• 대한전자공학회논문지SD
• /
• 제37권1호
• /
• pp.29-35
• /
• 2000

전자빔 증착 장비를 이용하여 SrS:Cu,X TFEL 소자를 제작한 후, 발광 특성을 분석하였다. 형광체 모체는 SrS 분말을 사용하였고 발광 중심체로는 Cu, $CuF_2,\;Cu_2S$ 또는 CuCl 등의 미분말을 사용하였다. SrS:Cu,X TFEL 소자의 발광 특성은 부활성제에 따라 매우 많은 변화를 나타내었다. SrS:$Cu_2$ TFEL 소자의 휘도($L_{40}$)와 효율 (${\eta}_{20}$)은 각각 1443 cd/$m^2$와 2.44 lm/w를 나타내었고, 녹색 빛의 발광 효율은 ZnS:Tb TFEL 소자보다 높아 새로운 녹색 형광체로의 활용이 기대되었다. SrS:CuCl TFEL 소자의 휘도($L_{40}$)와 효율(${\eta}_{20}$)은 각각 262 cd/$m^2$와 0.26 lm/w를 나타내었고 청색 빛을 방출하여 새로운 청색 형광체로의 활용 가능성을 확인하였다.

• 대한수의학회지
• /
• 제31권1호
• /
• pp.1-10
• /
• 1991

The present investigation was focussed on histochemical and electron microscopical observations of utero-vaginal(U-V) glands in U-V junctions of domestic hens. In histochemical observations, fine granules by PAS technique for mucopolysaccharides and nile blue stain for acidic lipids were slightly stained on the cytoplasm of U-V glandular epithelium. Larger granules by Sudan black B stain for neutral fat and phospholipids and Sudan III stain for neutral fat were heavily stained on the perinuclear region of the U-V gland epithelial cells. These positive materials were heavily stained on the U-V glandular epithelium of lowfecundity hens and non-laying hens. In scanning electron microscopic findings of the U-V junction surface, the orifices of U-V glands are seen as the crater-like invagination. The neck of the U-V gland and the epithelium of U-V iunction were covered by ciliated epithelial cells. Aggregates of spermatozoa are observed often to be on the necks of the U-V gland. These spermatozoa heads are embedded in the glandular tubules and many spermatozoa tails are free on the epithelium of uterine surface. In transmission electron microscopic findings, the epithelial cells of the U-V glandular orifices were ciliated, columnar cells. The apical regions of these cells contained numerous electrondense, round secretory granules of uniformly size. The epithelial cells of the U-V glandular tubule were columnar or pyramid shape with round or oval nuclei. These epithelial cells have numerous microvilli and also contained electron-dense, round secretary granules of uniformly size and electron-lucent vesicles of various size. Spermatozoa are seen as the cross-sections of various regions of heads and tails in glandular tubules. Also spermatozoa arranged longitudinally parallel within the glandular tubules.