• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.04b
• /
• pp.38-41
• /
• 2002

The variation of photoluminescence(PL) properties of Si thin films was investigated by changing deposition temperatures, Si-rich silicon oxide films on p-type (100) Si substrate have been fabricated by pulsed laser deposition(PLD) technique using a Nd:YAG laser. During deposition, the substrates were kept at the temperature range of room temperature(RT) to $400^{\circ}C$. After deposition, samples were annealed at $800^{\circ}C$ in nitrogen ambient, Strong Blue PL has been observed on RT-deposited Si nanocrystallites. When the deposition temperature was increased over $100^{\circ}C$, PL intensities abruptly decreased. The experimental results show the growing mechanism of Si nanocrystallites by PLD.

• Rapid Communication in Photoscience
• /
• v.2 no.1
• /
• pp.34-37
• /
• 2013

Two novel antenna complexes of $Eu^{III}$ with 1-naphthoic acid (NA) as primary ligand and two aromatic N-donor ligands namely N-hexyl-N-(pyridin-2-yl) pyridin-2-amine (1) and 4-((dipyridin-2-ylamino)methyl)benzoic acid (2) have been synthesized and characterized by various spectroscopic techniques. The room-temperature (298 K) photoluminescence spectrum of $Eu^{III}$ complexes composed of typical line like emissions, assigned to transitions between the first excited state $^5D_0$ to the $^7F_J$ (J = 0-4), resulting in red emission along with the residual emission from the 1-naphthoic acid moiety in the blue region. The determined CIE color coordinate value for the complex 2 is (x = 0.36, y = 0.34), which is in white region.

• Journal of the Korean Ceramic Society
• /
• v.45 no.3
• /
• pp.142-145
• /
• 2008

The growth of amorphous silica nanowires by on-site feeding of silicon and oxygen is reported. The nanowires were grown on a nickel-coated oxidized silicon substrate without external silicon or oxygen sources. Transmission electron microscopy observation revealed that the nanowires, which have diameters of less than 50 nm and a length of several micrometers, were grown using a traditional vapor-liquid-solid mechanism. Blue photoluminescence was observed from these nanowires at room temperature. An approach to grow nanowires without external precursors may be useful when integrating nanowires into devices structures. This can benefit the fabrication of nanowire-based nanodevices.

• Proceedings of the KIEE Conference
• /
• 2002.11c
• /
• pp.569-572
• /
• 2002

In this study, a real-time image composition system was implemented using chroma key algorithm. To write a high Quality chroma key function based on processing of foreground and/or background frames before combining them into an output image, Adaptive 3-dimensional surface equation model was proposed. When the bright of room is changed or shadow of object is on the blue screen, proposed algorithm would still produce good result.

• Transactions of Materials Processing
• /
• v.8 no.3
• /
• pp.221-221
• /
• 1999

Warm deep drawability in a square cup drawing was investigated using a newly developed high-strength steel sheet with retained austenite that was transformed into martensite during formation. For this investigation, six different temperatures between room temperature and 250℃, and five different drawing ratios ranging from 2.2 to 2.6 were considered. The results showed that the maximum drawing force and the drawing depth were affected by the change in temperature, and a more stable thickness strain distribution was observed at elevated temperatures. However, blue shortness occurred at over 200℃. FEM analysis using the LS-DYNA code was used to compare the experimental results with the numerical results for the thickness strain distribution.

• Proceedings of the KWS Conference
• /
• 2003.05a
• /
• pp.260-262
• /
• 2003

In this study, high temperature tensile properties of high tensile strength steels(POSTEN60, POSTEN80) were investigated by elevated temperature tensile test. According toe the results, high temperature tensile strength of POSTEN60 deteriorated slowly to 100$^{\circ}C$. As the temperature went up the tensile strength became better because of blue shortness and it deteriorated radically after reached to the maximum value around 300$^{\circ}C$. For the POSTEN80, high temperature tensile strength deteriorated slowly to 200$^{\circ}C$.As the temperature went up the tensile strength became better and it deteriorated slowly to 600$^{\circ}C$ after reached to the maximum value around 300$^{\circ}C$. Strain of high tensile strength steels at the elevated temperature increased radically after the mercury rose to 600$^{\circ}C$. The strain hardening ratio of POSTEN60 was larger then that of POSTEN80 at the elevated temperature as in the case at the room temperature and it became smaller radically after the mercury rose to 400$^{\circ}C$.

• Proceedings of the KIEE Conference
• /
• 2000.11c
• /
• pp.411-412
• /
• 2000

Si nanocrstallites on p-tyre (100) Si substrate have been fabricated by pulsed laser deposition technique using a Nd:YAG laser with the wavelength of 355, 532 and 1064 nm. The base vacuum in the chamber was down to $10^{-5}$ Torr and the pressure of the gas during deposition was varied from 1 to 3 Torr. After deposition, Si nanocrystallites have been annealed at $N_2$ gas. Nitrogen have been used as ambient gases. Strong blue and green luminescence from Si nanocrystallites has been observed in room temperature by photoluminescence and its peak energies shift to green when the wavelength is increased from 355-1064 nm

• Journal of the Korean Ceramic Society
• /
• v.36 no.11
• /
• pp.1189-1197
• /
• 1999

Low-density silica gel monolith was synthesized at ambient pressure by surface modification with TMCS and sub-sequent heat treatment. The mechanical thermal and optical properties of gel were studied. Compressive strength and modulus of compression of 350$^{\circ}C$-heated gel with the density of 0.24g/cm3 were 250kPa and 0.2MPa respectively. The thermal conductivity of silica gels synthesized at ambient pressure exhibited 0.02 W/m$.$K for the density of 0.24g/cm3 which is similar to that of the gel via supercritical drying and their main thermal transfer mechanism is considered to be solid and radiation conduction at room temperature. Ambient-dried silica gels were transparent blue showing about 60% of transmittance in the wavelength of 1500-2100nm and typical absorption bands of existing bonds under heat treatment at 350$^{\circ}C$. Medium scale monolity(${\Phi}$=50mm) at ambient pressure could be successfully prepared through total 5-month process period.

• Proceedings of the KIEE Conference
• /
• 2006.10a
• /
• pp.89-90
• /
• 2006

We synthesized emissive materiaJs, nameJy $Zn(HPB)_2$. The fundamentaJ structures of the OLEDs were ITO / NPB (40 nm) $Zn(HPB)_2$ (40 nm) / $Alq_3$:DCJTB (20, 30, or 40 nm) / LiF / AI. We varied the thickness of $Alq_3$:DCJTB from 20 nm to 40nm. We measured current density-voJtage and luminance-voJtage characteristics at room temperature. When the thickness of the Alq3:DCJTB layer was 40 nm, white emission is achieved. The CIE coordinates are (0.32, 0.33) at an applied voltage of 14V.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.1255-1260
• /
• 2004

Decomposition of ozone at room temperature was investigated comparatively with commercial monolithic ozone decomposition catalyst (ODC, $MnO_2$) and monolithic photo catalyst ($TiO_2$). The effects of residence time, UV (ultraviolet) light dependence and ozone concentration on the conversion was presented. UV ray was irradiated using BLB (black light blue) lamp ($315{\sim}400$ nm), supplied with a constant intensity in the reactor. The concentration of ozone in the square-shape reactor can be controlled by combining the DBD (dielectric barrier discharge) reactor with an AC high voltage supply system. The catalytic performance, in presence of UV irradiation did not show significant changes for $MnO_2$ catalyst. $TiO_2$ catalyst was the different case, which showed higher decomposition activity in presence of UV irradiation. Deactivation of catalyst detected by real-time ozone monitor for 120 hours with a constant inlet ozone concentration.