• Korean Journal of Materials Research
• /
• v.17 no.4
• /
• pp.198-202
• /
• 2007

A new organic light emitting device(OLED) with two peak wavelength(blue and yellow) emission was fabricated using the selective doping in a single fluorescent host , and its electrical and optical characteristics were investigated. The fabricated device showed the luminance and efficiency of 1600 $Cd/m^2$ and 2.4 Im/W under the applied voltage of 10V, respectively. And its electroluminescent spectra had two peak wavelengths of 470nm and 560nm emitting bluish white light. The OLED with dual wavelength emission in this experiment is likely to be developed as a white OLED with simpler fluorescent system than conventional devices.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.9
• /
• pp.696-700
• /
• 2010

We fabricated red and blue organic light emitting display (OLEDs) which had the two kinds of multi-structure of ITO/HIL/HTL/EML/ETL/LiF/Al and ITO/HIL/HTL/EML/ETL/LiF/Al/LiF. In the case of red OLED that had LiF/Al/LiF structure compared to LiF/Al structure, the current density increased from 4.3 mA/$cm^2$ to 7.3 mA/$cm^2$, and the brightness increased from 488 cd/$m^2$ to 1,023 cd/$m^2$ at 7.0 V, and as a result the current efficiency was improved from 11.28 cd/A to 13.95 cd/A. Also in the case of blue OLED that had LiF on Al cathode layer, the current density increased from 1.2 mA/$cm^2$ to 1.8 mA/$cm^2$, and the brightness increased from 45 cd/$m^2$ to 85 cd/$m^2$ at 7.0 V, and as a result the current efficiency was improved from 3.69 cd/A to 4.82 cd/A. Through these experimental results it could be suggested that the LiF layer formed on Al prevents the oxidation of Al surface, and the electrode resistance become low with increase of supplied electrons, therefore the brightness and the efficiency are improved from the influence to the well-balanced bonding of electron and hole at emitting layer.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.797-798
• /
• 2005

We report a novel structure for a full-color AMOLED (Active Matrix Organic Light Emitting Diode) eliminating the patterning process of a blue emitting layer. The patterning of the three primary colors, RGB, is a key technology in the OLED fabrication process. Conventional full color AMOLED containing RGB layers includes the three opportunities of the defects to make an accurate position and fine resolution using various technologies such as fine metal mask, ink-jet printing and laser-induced transfer system. We can skip the blue patterning step by simply stacking the blue layer as a common layer to the whole active area after pixelizing two primary colors, RG, in the conventional small molecular OLED structure. The red and green pixel showed equivalent performances without any contribution of the blue emission.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.435-438
• /
• 2008

We demonstrated the efficient blue organic light-emitting diodes (OLEDs) by employing diarylamino-fluorene derived blue fluorescent molecules as dopants. Among those, a device exhibited blue emission with the luminous efficiency of 11.2 cd/A at $20\;mA/cm^2$, the external quantum efficiency of 9.7% at $20\;mA/cm^2$, and the $CIE_{x,y}$ coordinates of (x=0.163, y=0.259) at 8V.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.775-778
• /
• 2009

Novel blue host material, 4,4'-(dinaphthalen-2-yl)-1,1'-binaphthyl (DNBN), was designed and synthesized for OLEDs. In order to test the electroluminescent properties of DNBN, DNBN was used as the host materials for a blue emitter, PCVtPh. The device exhibited deep-blue emission with the CIEx,y coordinates (x=0.15, y=0.08) at 8.0 V, a luminous efficiency of 1.66 cd/A, a power efficiency of 0.77 lm/W and an external quantum efficiency of 2.30 % at 20 mA/$cm^2$, respectively.

• ETRI Journal
• /
• v.43 no.6
• /
• pp.1093-1102
• /
• 2021

Microdisplays based on organic light-emitting diodes (OLEDs) have a small form factor, and this can be a great advantage when applied to augmented reality and virtual reality devices. In addition, a high-resolution microdisplay of 3000 ppi or more can be achieved when applying a white OLED structure and a color filter. However, low luminance is the weakness of an OLED-based microdisplay as compared with other microdisplay technologies. By applying a tandem structure consisting of two separate emission layers, the efficiency of the OLED device is increased, and higher luminance can be achieved. The efficiency and white spectrum of the OLED device are affected by the position of the emitting layer in the tandem structure and calculated via optical simulation. Each white OLED device with optimized efficiency is fabricated according to the position of the emitting layer, and red, green, and blue spectrum and efficiency are confirmed after passing through color filters. The optimized white OLED device with color filters reaches 97.8% of the National Television Standards Committee standard.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.272-276
• /
• 2004

Great strides in organic light emitting device (OLED) technology have resulted in a number of commercial products. To continue this growth into large area displays, for example televisions, an understanding of the mechanisms that drive the OLED device efficiency and lifetime performance is critical. In this work, we consider maximizing the efficiency lifetime product based on phosphorescent OLED ($PHOLED^{TM}$) technology. We report green PHOLEDs with luminous efficiency of 82 cd/A, 5.7 V and 10,000 hours lifetime at 1,000 cd/$m^2$,red PHOLEDs with CIE of (0.67,0.33), 11 cd/A and 35,000 hours lifetime at 500 cd/$m^2$ and recent progress in blue demonstrating efficiencies of 18 cd/A at 200 cd/$m^2$.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.3
• /
• pp.252-256
• /
• 2009

We have developed low driving voltage white organic light emitting diode with a new electron transport material, triphenylphosphine oxide ($Ph_{3}PO$). The white light emission was realized with a rubrene yellow dopant and blue-emitting DPVBi layer. The new electron transport layer results in a very high current density at low voltage, resulting in a reduction of driving voltage. The device with a new electron transport layer shows a brightness of $1150\;cd/m^2$ at a low driving voltage of 4.3 V.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.6 no.2
• /
• pp.138-145
• /
• 2007

Luminous traffic safety mark is restricted to use only the place that has a thick fog, many night traffic accidents, limited field of view due to structure of road. Recently, LEDs are used for luminous traffic safety mark, but we propose an organic LED for a novel luminous traffic safety mark in the near future. The device structure was $ITO/2-TNATA(500{\AA})/{\alpha}-NPD(200{\AA})/DPVBi(300{\AA})/BCP(10{\AA})/Alq_3(200{\AA})/LiF(10{\AA})/Al:Li(1000{\AA})$. The characteristics of the device are most efficient on occasion of using $N_2$ gas plasma treatment. Current density is $240.71mA/cm^2$ luminance $10,550cd/m^2$, and current efficiency 3.53cd/A at an applied voltage of 10V. The maximum EL wavelength of the fabricated blue organic light-emitting device is 456nm. CIE color coordinates are x=0.1449 and y=0.1633, which is similar to NTSC deep-blue color with CIE color coordinates of x=0.14 and y=0.08.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.265-268
• /
• 2004

We have developed a highly efficient and stable blue organic electroluminescent device (OLED) based on the blue fluorescent p-bis(p-N,N-diphenyl-aminostyryl)benzene (DSA-Ph) dopant in a morphologically stable high-bandgap host material, 2-methyl-9,10-di(2-naphthyl)anthracene (MADN), which achieved an EL efficiency of 9.7 cd/A and 5.5 lm/W at 20 mA/$cm^2$ and 5.7 V with a Commission Internationale d'Eclairage coordinates of(x = 0.16, y = 0.32). This sky blue device which could also alleviate the problematic current induced quenching at high current achieved a half-decay lifetime ($t_{1\;2}$) of 46,000 h at an initial brightness of 100 cd/$m^2$.