• 한국물환경학회지
• /
• 제21권3호
• /
• pp.289-296
• /
• 2005

Purpose of this research is to quantitatively and qualitatively investigate the blow down wastewater produced from Yeosu Industrial Complex. Approximately, 38,325,000 tons/year of wastewater is produced, processed and finally discharged. Six representative companies, namely, A, B, C, D, E, F were chosen for this study. Each company produce over 5,000 tons/day of wastewater. In total, 6,844 tons/day of blow down water is produced from these six companies, put together. However, companies A and C produce about 24% and 37% of blow down water, respectively. It was found that the blow down water had favorable qualities, except for its high conductivity, ranging from 230 to $1,700{\mu}s/cm$. It was evident that, this water can be suitable for reuse, for industrial purposes, if a suitable treatment, for example, RO membrane process is adopted to remove high conductivity.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.206-211
• /
• 1992

A mathematical model of the blow-down type wind tunnel is developed in order to design the controller which controls the stagnation pressure being used to obtain the setpoint Mach Number. The motion of compressible fluids in the tunnel is modeled using the one-dimensional gasdynamics. The time responses of the wind tunnel states, such as pressures, mass flow rates, and valve open area, are investigated by digital computer simulation. By the simulation study it is shown that the real blow-down wind tunnel can be simulated by the obtained mathematical model.

• 드라이브 ㆍ 컨트롤
• /
• 제14권3호
• /
• pp.32-39
• /
• 2017

In this study, a mathematical model of the pneumatic part in a gas blow-down system is proposed. The mathematical model consists of four major parts: pressure vessel, reservoir, pressure regulator and pipe-line. To ensure accuracy in long-time simulations, heat transfer between gas and pressure vessel is considered. The model is validated by comparing simulation results with experimental data. Experiments are conducted on the ground, where free convection can be assumed. Simulation results indicate the proposed model can accurately describe behavior of a gas blow-down system. Therefore, it may be used for design and analysis of similar systems with a slight modification.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.45-49
• /
• 2011

자발가압 특성이 있는 $N_2O$를 적용한 Blow-down 산화제 공급방식은 조절 시스템(Regulated system)에 비해 많은 장점을 가지고 있다. 그러나 탱크 내에 $N_2O$가 액체와 기체의 2상으로 공존하고, 유동이 배출되는 동안 탱크 안의 $N_2O$의 물성치가 계속적으로 달라지기 때문에 배출 유량을 예측하는데 어려움이 있다. 본 논문에서는 $N_2O$를 적용한 Blow-down 산화제 공급방식을 간단하게 해석 할 수 있는 방법을 연구했다. 포화상태 $N_2O$의 물성치는 NIST 데이터베이스를 이용했으며, 인젝터 모델로 nonhomogeneous nonequilibrium(NHNE) 모델을 적용하였다. 하이브리드 로켓 연소기를 이용해 cold flow test를 수행하였으며, 두 결과가 잘 일치함을 확인했다.

• 드라이브 ㆍ 컨트롤
• /
• 제13권3호
• /
• pp.1-7
• /
• 2016

A cold gas blow-down hydraulic actuation system is widely used in missiles that require an actuation system with a fast response time under a limited space with a short operating time and large loads on the actuators. The system consists of a pneumatic part that supplies the regulated high-pressure gas to a reservoir, and a hydraulic part that supplies pressurized hydraulic oil to the actuators by the pressurized gas in the reservoir. This paper proposes a mathematical model to analyze and simulate the pneumatic part of an actuation system that supplies the operating power to the actuators. The mathematical model is based on the ideal gas equation and also considers the models for heat transfer. The model is applied to the pressure vessel and the gas part of the reservoir, and the model for the pneumatic part is established by connecting the two models for the parts. The model is validated through a comparison of the simulation results with the experimental results. The comparison shows that the suggested model could be useful in the design of the pneumatic part of a cold gas blow-down type hydraulic actuation system.

• Journal of Trauma and Injury
• /
• 제22권1호
• /
• pp.44-50
• /
• 2009

Purpose: The purpose of this study was to evaluate the causes of blow-out fractures, the computed tomography findings, and the associated facial bone fractures in aged patients. Methods: This study was performed by conducting a chart review. From January 2004 to December 2007, the patients who visited the emergency room of Asan Medical Center and were diagnosed as having a blow-out fracture were included in the study population. Patients 60 years of age or older were grouped as the aged group while patients younger than 60 years of age were grouped as the control group. Results: Between the aged group and the control group, there was a difference in the causes of blow-out fractures. The most common cause of blow-out fracture was a slip down in the aged group and violence in the control group (p<0.05). There were no differences in associated symptoms. Extraocular muscle herniation was the only statistically different computed tomography findings. In associated facial bone fractures, the most common fractures were the zygoma in the aged group and the nasal bone in the control group (p<0.05). Conclusion: In patients 60 years of age or older, the most common cause of blow-out fracture was a slip down, and the most common associated facial bone fracture was a zygomatic fracture.

• 대한수학회지
• /
• 제37권6호
• /
• pp.1007-1019
• /
• 2000

In this paper, we discuss a uniqueness problem for the Cauchy problem of the Euler equation. W give a sufficient condition on the vorticity to show the uniqueness of a class of generalized solution in terms of the generalized solution in terms o the generalized Besov space. The condition allows the iterated logarithmic singularity to the vorticity of the solution. We also discuss the break down (or blow up) condition for a smooth solution to the Euler equation under the related assumption.

• 대한수학회보
• /
• 제54권6호
• /
• pp.1927-1933
• /
• 2017

We prove that there are rational homology balls $B_p$ smoothly embedded in the 2-handlebodies associated to certain knots. Furthermore we show that, if we rationally blow up the 2-handlebody along the embedded rational homology ball $B_p$, then the resulting 4-manifold cannot be obtained just by a sequence of ordinary blow ups from the 2-handlebody under a certain mild condition.

• 한국유체기계학회 논문집
• /
• 제19권1호
• /
• pp.18-23
• /
• 2016

A HVAC(Heating Ventilation and Air Conditioning) is adapted to increase the comfort of the cabin environment for train. The train HVAC duct system has very long duct and many outlets due to the shape of a train set. the duct cross section shape is limited by a roof structure and equipments. Therefore, the pressure distribution and flow uniformity is an important performance indicator for the duct system. In this study, the existing blow down type HVAC duct system for a train was supplemented to improve the flow uniformity by applying a design method combining design of experiment (DOE) with numerical analysis. The design variables and the test sets were selected and the performance for each test set was evaluated using CFD(Computational Fluid Dynamics). The influence of each design variable on the system performance was analysed based on the results of the performance evaluation on the test sets. Furthermore, the optimized model, whose the flow uniformity was improved was produced using the direct optimization(gradient-based method). Finally, the performance of the optimized model was evaluated using numerical analysis, and it was confirmed that its flow uniformity has indeed improved.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.607-612
• /
• 2006

A pressure-type rapid automatic filter of 2000mm diameter and 170 ton/h filtering capacity was fabricated. In case of no external impurity inflow, the turbidity removal efficiency on raw water was experimented and the numbers of impurities of each sizes were analyzed by particle counter. As the result of circulated filtering, the raw water of 40 NTU was filtered to 0.44 NTU and the numbers of impurities above $1{\mu}m$ were removed by approximately 95%. With the filtering efficiency experimented and the mathematical method, the turbidity change of circulation water were calculated according to the inflow rate of external impurity and water treatment method of blow-down or filtering. The cost of blow-down water was calculated from above results. And simple payback period for this filter is calculated as about one year. Nowadays, as the cost of water is continuously increasing and environment regulations will be more strict, the water quality control using this filter will be expected to satisfy the user requirement.