• 한국안광학회지
• /
• 제19권2호
• /
• pp.135-143
• /
• 2014

목적: 국제표준에서 규정한 청색광위험함수를 도입하여 청색광차단렌즈에 대한 청색광차단율과 시감투과율을 평가한다. 방법: 8개사 총41종의 청색광차단렌즈에 대한 청색광차단율과 시감투과율을 구하기 위해 UV-VIS 분광광도계로 380~780 nm 범위에서의 분광투과율을 측정하였다. 청색광차단율은 ANSI Z80.3:2010 및 ISO 13666(한국표준 KS B ISO 13666:2004)에서 규정된 청색광위험함수를 도입하여 산출하였다. 결과: 전체 렌즈에 대한 청색광차단율 범위는 9.3%~96.8%, 투과율 범위는 53.5%~92.7%, 시감투과율 범위는 58.0%~98.1%이었다. 전반적으로 코팅 청색광차단렌즈는 시감투과율이 높은 경향이 있었고, 착색 청색광차단렌즈는 청색광차단율이 높은 경향이 있었다. 결론: 렌즈분광분포곡선의 분석으로부터 청색광차단렌즈의 성능을 향상시킬 수 있는 가능성이 있음을 확인할 수 있었다. 제조업체는 국제표준의 규정에 맞춰 성능을 평가할 수 있는 자체기술을 확보할 필요가 있다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.257-260
• /
• 2002

This study is intended is to analyze the blocking performance with variation of the gap of bar and kinds of metal lath for construction joint when placing concrete. According to the results, passing ratio of concrete increases with increase of vibrating time. In the case of W/C 50%, when blocking concrete with bar of D10 and D20 which the gap of bar is below 200mm, or metal lath, passing ratio of concrete is below 10%, so blocking performance is favorable. In the case of W/B 30%, while concrete does not flow out without vibration at slump 21mm, concrete flows out at some degree before vibration at slump flow 65mm and then, as 5 seconds passes after first vibration, final passing ratio shows about 85~90%. When blocking concrete by bar D10 of the gap 20mm, bar D20 of the gap 10mm and metal lath, it is thought that concrete can be blocked effectively because final passing ratio is below 10%.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.140.3-140
• /
• 2001

This paper analyzes a blocking that is due to shared resource in multiprocessor system. A proposed analysis for shared resource suggests a scalable and amendable scheduling method about task allocation. An equation of shared resource blocking is proposed by a throughput at common bus and a ratio of throughput during time period, it is included a parameter of tasks scheduling. Using this equation, a new guideline for task allocation of multiprocessor is presented. Finally, in proposed system a model simulations for the proposed blocking model is given by a deterministic ratio of shared resource.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.17-19
• /
• 2008

An advanced TFT-LCD structure was proposed to increase aperture ratio (AR). In this structure, metal layers formed below the data lines are used as light-blocking layers, achieving higher AR ratio than that of a conventional structure. Since average misalignment between the metal light-blocking layers and pixel electrodes is smaller than that of black matrixes on color filter glass, substantially less light-blocking areas are needed to achieve misalignment margin. The AR of the LCD panel fabricated by using proposed structure was enhanced by 18.7 % over that of the conventionally structured panel.

• 설비공학논문집
• /
• 제25권9호
• /
• pp.499-505
• /
• 2013

R744 has been appropriated for substitute refrigerant, because of its high stability, and environment-friendly nature as a natural refrigerant. To analyze the cooling performance of a refrigeration system in a refrigerator truck using R744 according to the blocking ratio, an analytical model of the refrigeration system was developed under frost conditions, using EES. The performance of the refrigeration system was predicted with the indoor and outdoor air temperature, outdoor air velocity, and compressor speed. As a result, the system performance decreased, with the increase of frost growth. When the blocking ratio was 40.4% in the basic condition, the refrigeration capacity was decreased by 27.1%, compared to the non-frost condition.

• Geomechanics and Engineering
• /
• 제34권2호
• /
• pp.155-171
• /
• 2023

Aiming at the grouting treatment of water inflow in karst conduits, a visualized experiment system for conduit-type grouting blocking was developed. Through the improved water supply system and grouting system, and the optimized multisource information monitoring system, the real-time observation of diffusion and deposition of slurry, and the data acquisition of pressure and velocity during the whole process of grouting were realized, which breaks through the problem that the monitoring element is easy to fail due to slurry adhesion in conventional test system. Based on the grouting experiments in static and flowing water, the diffusion and deposition behavior of the quick-setting slurry under different working conditions were analyzed. The temporal and spatial variation behavior of the pressure and velocity were studied, and the blocking mechanism of the grouting were further revealed. The results showed that: (1) Under the flowing water condition, the counter-flow diffusion distance of slurry was negatively correlated with the flow water velocity and the volume ratio of cement and sodium silicate (C-S ratio), and positively correlated with the grouting volume. The slurry deposition thickness was negatively correlated with the flowing water velocity, and positively correlated with the grouting volume and C-S ratio. (2) The pressure increased slowly before blocking of the flowing water and rapidly after blocking in karst conduits. (3) With the continuous progress of grouting, the flowing water velocity decreased slowly first, then significantly, and finally tended to be stable. According to the research results, some engineering recommendations were put forward for the grouting treatment of the conduit-type water inflow disaster, which has been successfully applied in the treatment project of the China Resources Cement (Pingnan) Limestone Mine. This study provided some guidance and reference for the parameter optimization of grouting for the treatment projects of water inflow in karst conduits.

• Elastomers and Composites
• /
• 제40권4호
• /
• pp.249-257
• /
• 2005

폴리우레탄 프리폴리머들이 폴리올과 디이소시아네이트로부터 제조되었다. 이온화되지 않은 폴리우레탄 프리폴리머들은 폴리프로필렌 글리콜(PPG, MW:1000), 디메치롤 프로피온산(DMPA)과 이소포론 디이소시아네이트(IPDI)를 사용하여 합성되었다. 폴리올과 디이소시아네이트의 몰비를 변화시키면서 합성된 폴리우레탄 프리폴리머들은 물에 분산된 후 물성을 측정하였다. 실험결과는 프리폴리머가 하드세그먼트 40%, NCO 3.43%, [NCO]:[OH]=1.5:1.0의 조건에서 가장 안정한 분산액을 보여 주었고, 30%의 고형분으로 물에 분산되었다. 폴리우레탄 프리폴리머들은 또한 PPG와 DMPA의 몰비를 변화시키면서 합성되었다. DMPA의 몰비가 높을 때 폴리우레탄 수분산액의 입경은 감소하였다 3가지 종류의 말단기 차단제(blocking agent)를 사용하여 제조된 폴리우레탄 프리폴리머들은 사용된 차단제에 따라 각각 다른 초기 해리 온도를 나타내었고 3가지 종류의 차단제에 대한 해리의 시작은 모두 30분 안에 일어났다.

• 방송공학회논문지
• /
• 제21권4호
• /
• pp.472-483
• /
• 2016

본 논문에서는 MC-FRUC(Motion Compensated Frame Rate Up-Conversion) 에서 사용될 수 있는 주파수 영역에서의 블로킹 현상(blocking artifacts) 검출 알고리즘을 제안한다. MC-FRUC 알고리즘은 블록 단위로 움직임 벡터를 계산하여 움직임 보상을 수행함으로써 블록 경계선 주변에서 블로킹 현상이 발생할 수 있다. 본 논문에서는 효율적인 블로킹 현상 검출을 위해 보간된 영상(interpolated frame)의 주파수 성분을 분석하여 블록경계에서 블록킹 현상을 감소시킨다. 실험결과에서 제안된 알고리즘이 기존의 FRUC 방법보다 더 나은 주관적 화질을 보인다. 제안한 방법은 또한 기존의 BDMC(Bi-Directional Motion Compensation) 대비 평균 약 0.45 dB PSNR(Peak Signal to Noise Ratio)이 향상되었다.

• 한국통신학회논문지
• /
• 제36권9B호
• /
• pp.1039-1048
• /
• 2011

Carrier Ethernet, which extend The algorithm based on constructing the mixed topology and performing link stretching, MT/s, has been proposed for designing cost-efficient Carrier Ethernet in optical network with multi-line-rate. However, the MT/s algorithm has high blocking ratio because the wavelength capacity is fully allocated without considering the load balance of network. In this paper, we propose an efficient mixed topology configuration (EMTC) algorithm by modifying MT/s algorithm. In order to reduce blocking ratio, we adapt a threshold for each link to restrict the link utilization so that traffic load can be distributed over whole network. We also apply the EMTC algorithm into optical hybrid switched network to evaluate the availability of our algorithm for different applications. The performance of the EMTC algorithm is compared with that of MT/s algorithm through OPNET simulation. The simulation results show that our algorithm achieve lower blocking ratio than the MT/s algorithm. Moreover, in hybrid switched network, our algorithm performs better than MT/s algorithm in terms of packet loss ratio and end-to-end delay.

• Plant Resources
• /
• 제7권1호
• /
• pp.77-86
• /
• 2004

The reduced ratio of red:far-red (R:FR) light acts as a measure of the proximity of competitors and plants can detect the potentially competing neighbor plants by perceiving reflected R:FR signals and initiate the response of “shade avoidance” before actual shading occurs. The phytochrome system is responsible for monitoring the changes in the R:FR and initiating the shade avoidance response. The response to low R:FR ratio was studied in a white aspen Populus alba clone ‘Bolleana’ using two filter systems: a clear plastic filter system that allows a R:FR ratio less than 1.0 to pass from adjacent border plant reflection; and a special commercial plastic that blocks FR light and creates a R:FR ratio above 3.0. The reduced R:FR signals enhanced the stem elongation in response to competition at the expense of relative stem diameter growth. Trees grown inside clear chambers were 27 ％ taller than trees grown inside the FR-blocking filter chambers. Stem taper of clear chamber trees was 16％ less than the FR-blocking filter trees. Low R:FR also induced 22％ more stem dry weight and 13％ greater petiole length per leaf compared to the FR-blocking filter trees. There were no statistically significant differences in leaf area, leaf number increment, and total dry weight between the two light filter treatments.