• Title/Summary/Keyword: Blocking bar

Search Result 17, Processing Time 0.021 seconds

Development of Control System for Transversal Temperature of Strips in Hot Strip Mills (열간압연공정에서의 스트립 폭방향 온도제어 시스템 개발)

  • Choi, Jae-Chan;Lee, Sung-Jin;Park, Bong-Su
    • Transactions of the Korean Society of Mechanical Engineers A
    • /
    • v.20 no.4
    • /
    • pp.1202-1215
    • /
    • 1996
  • In this study, in order to achieve the uniformity of mechanical properties and microstructures of a hot-rolled coil in the transversal direction, the edge mask device is newly device is newly developed and installed at the upper laminar-flow cooling head in the run out table, which controls the transversal temperature of strip with enco panel and bar edge heater. The device that is transversally movable prevents the temperature drop of strip edge by blocking the cooling water into the strip edge. So, the pattern of edge mask set-up condition of the device was derived by analyzing the characteristics of strip temperature and mechanical properties according to the on-line application of edge mask.

Preparation of UV blocking $TiO_2$ Thin Films by Inkjet Printing Method (잉크젯 프린팅을 이용한 자외선 차단용 $TiO_2$ 박막제조)

  • Yun, Cho-Rong;O, Hyo-Jin;Lee, Nam-Hui;Yupeng, Guo;Kim, Seon-Jae
    • Proceedings of the Korean Institute of Surface Engineering Conference
    • /
    • 2007.04a
    • /
    • pp.105-106
    • /
    • 2007
  • 자외선 차단용 $TiO_2$ 박막을 제조하기 위해 수열합성법 중 외부로부터 $N_2$ 가스를 인가하는 방법으로 200 bar의 압력을 유지하여 브룩카이트상의 $TiO_2$ 졸을 합성하였다. 제조된 $TiO_2$ 졸을 잉크젯 프린터로 FTO glass에 프린팅하여 $TiO_2$ 박막을 제조하였고, 합성된 졸과 박막의 특성 평가를 실시하였다. 합성된 졸의 크기는 30nm 이하로 비교적 균질하였으며 잉크젯 프린팅 후에도 입자 형상 및 크기의 변화는 나타나지 않았다. 또한, 코팅 횟수가 증가함에 따라 자외선 영역에서의 흡수도가 증가함을 알 수 있었다.

  • PDF

Structural characterization of nonpolar GaN using high-resolution transmission electron microscopy (HRTEM을 이용한 비극성 GaN의 구조적 특성 분석)

  • Kong, Bo-Hyun;Kim, Dong-Chan;Kim, Young-Yi;Ahn, Cheol-Hyoun;Han, Won-Suk;Choi, Mi-Kyung;Bae, Young-Sook;Woo, Chang-Ho;Cho, Hyung-Koun;Moon, Jin-Young;Lee, Ho-Seong
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2009.06a
    • /
    • pp.23-23
    • /
    • 2009
  • GaN-based nitride semiconductors have attracted considerable attention in high-brightness light-emitting-diodes (LEDs) and laser diodes (LDs) covering from green to ultraviolet spectral range. LED and LD heterostructures are usually grown on (0001)-$Al_2O_3$. The large lattice mismatch between $Al_2O_3$ substrates and the GaN layers leads to a high density of defects(dislocations and stacking faults). Moreover, Ga and N atoms are arranged along the polar [0001] crystallographic direction, which leads to spontaneous polarization. In addition, in the InGaN/GaN MQWs heterostructures, stress applied along the same axis can also give rise to piezoelectric polarization. The total polarization, which is the sum of spontaneous and piezoelectric polarizations, is aligned along the [0001] direction of the wurtzite heterostructures. The change in the total polarization across the heterolayers results in high interface charge densities and spatial separation of the electron and hole wave functions, redshifting the photoluminescence peak and decreasing the peak intensity. The effect of polarization charges in the GaN-based heterostructures can be eliminated by growing along the non-polar [$11\bar{2}0$] (a-axis) or [$1\bar{1}00$] (m-axis) orientation instead of thecommonly used polar [0001] (c-axis). For non-polar GaN growth on non-polar substrates, the GaN films have high density of planar defects (basal stacking fault BSFs, prismatic stacking fault PSFs), because the SFs are formed on the basal plane (c-plane) due to their low formation energy. A significant reduction in defect density was recently achieved by applying blocking layer such as SiN, AlN, and AlGaN in non-polar GaN. In this work, we were performed systematic studies of the defects in the nonpolar GaN by conventional and high-resolution transmission electron microscopy.

  • PDF

Two Crystal Structures of Dehydrated $Ag^{+}$- and $Ca^{2+}$-Exchanged Zeolite $A,\;Ag_{12-2x}Ca_x-A\;(x=2\;and\;3)$ Treated with Cesium Vapor (탈수한 $Ag^{+}$ 이온과 $Ca^{2+}$ 이온으로 치환한 제올라이트 $A,\;Ag_{12-2x}Ca_x-A\;(x=2\;and\;3)$를 Cs 증기로 처리한 결정구조)

  • Song, Seung Hwan;Kim, Yang
    • Journal of the Korean Chemical Society
    • /
    • v.38 no.9
    • /
    • pp.621-627
    • /
    • 1994
  • Two crystal structures of dehydrated, $Ag^{+}$ and $Ca^{2+}$-exchanged zeolite A treated at $250^{\circ}C$ with 0.15 torr of Cs vapor have been determined by single-crystal X-ray diffraction technique in the cubic space group $Pm{\bar\3m$ at $21(1)^{\circ}C$ (a = 12.344(2) $\AA$ and 12.304(2) $\AA$). Their structures were refined to the final error indices, R (weighted), of 0.091 with 180 reflections, and 0.093 with 179 reflections, respectively, for which I > $3\sigma(I).$ In each structure, Cs species are found at four different crystallographic sites: 3 $Cs^{+}$ ions per unit cell are located at 8-ring centers, ca. 6.81∼7.14 $Cs^{+}$ ions are found on opposite 6-rings on threefold axes in the large cavity, ca. 1.93∼2.03 $Cs^{+}$ ions are found on threefold axes in the sodalite unit, and 0.53∼0.66 $Cs^{+}$ ions lie on opposite 4-rings. Also, ca. 4.12∼4.27 Ag atoms are located near the center of the large cavity. In these structures, excess cesium atoms in a unit cell are associated with other $Cs^{+}$ ions on a single threefold axis to form the linear cationic cluster $(Cs_4)^{3+}$. By blocking 8-rings, the $Cs^{+}$ ions may have prevented silver atoms from migrating out of the structure. The Ag atoms are likely to have formed hexasilver clusters at the centers of the large cavities. Each hexasilver cluster is stabilized by coordination to 14 $Cs^{+}$ ions.

  • PDF

Preparation of Ultra-Thin Transparent TiO2 Coated Film by Ink-Jet Printing Method (잉크젯 프린팅을 이용한 초박막 투명 TiO2 코팅층 제조)

  • Yoon, Cho-Rong;Oh, Hyo-Jin;Lee, Nam-Hee;Guo, Yupeng;Lee, Won-Jae;Park, Kyeong-Soon;Kim, Sun-Jae
    • Journal of the Korean institute of surface engineering
    • /
    • v.40 no.4
    • /
    • pp.190-196
    • /
    • 2007
  • Dye sensitized solar cells(DSSC) are the most promising future energy resource due to their high energy efficiency, low production cost, and simple manufacturing process. But one problem in DSSC is short life time compared to silicon solar cells. This problem occurred from photocatalytic degradation of dye material by nanometer sized $TiO_2$ particles. To prevent dye degradation as well as to increase its life time, the transparent coating film is needed for UV blocking. In this study, we synthesized nanometer sized $TiO_2$ particles in sols by increasing its internal pressure up to 200 bar in autoclave at $120^{\circ}C$ for 10 hrs. The synthesized $TiO_2$ sols were all formed with brookite phase and their particle size was several nm to 30 nm. Synthesized $TiO_2$ sols were coated on the backside of fluorine doped tin oxide(FTO) glass by ink jet printing method. With increasing coating thickness by repeated ink jet coating, the absorbance of UV region (under 400 nm) also increases reasonably. Decomposition test of titania powders dispersed in 0.1 mM amaranth solution covered with $TiO_2$ coating glass shows more stable dye properties under UV irradiation, compared to that with as-received FTO glass.

Three Crystal Structures of Dehydrated $Ag_{12-x}Na_x-A$ (x = 4, 6, and 8) Treated with Rubidium Vapor (탈수한 $Ag_{12-x}Na_x-A$ (x = 4, 6, 및 8)를 루비듐 증기로 처리한 세가지 결정구조)

  • Lee, Hyeon Do;Kim, Un Sik;Park, Jong Yeol;Kim, Yang
    • Journal of the Korean Chemical Society
    • /
    • v.38 no.3
    • /
    • pp.186-196
    • /
    • 1994
  • Three fully dehydrated partially $Ag^+$-exchanged zeolite A(Ag_4Na_8-A, Ag_6Na_6-A, and Ag_8Na_4-A) were treated at $250^{\circ}C$ with 0.1 torr Rb vapor at 4 h. Their structures were determined by singlecrystal X-ray diffraction methods in the cubic space group $Pm{\bar3}m$ (a = 12.264(4) $\AA$, a = 12.269(1) $\AA$, and a= 12.332(3) $\AA$, respectively) at $22(1)^{\circ}C$, and were refined to the final error indices, R(weighed), of 0.056 with 131 reflections, 0.068 with 108 reflections, and 0.070 with 94 reflections, respectively, for which I > $3\sigma(I).$ In these structures, Rb species are found at three different crystallographic sites; three $Rb^+$ ions per unit cell are located at 8-ring centers, ca. 6.0∼6.8 $Rb^+$ ions are found opposite 6-rings on threefold axes in the large cavity, and ca. 2.5 $Rb^+$ ions are found on three fold axes in the sodalite unit. Also, Ag species are found at two different crystallographic sites; ca. 0.6∼1.0 $Ag^+$ ion lies opposite 4-rings and about 1.8∼4.2 Ag atoms are located near the center of the large cavity. In these structures, the numbers of Ag atoms per unit cell are 1.8, 3.0, and 4.2, respectively, and these are likely to form hexasilver clusters at the centers of the large cavities. The $Rb^+$ ions, by blocking 8-rings, may have prevented silver atoms from migrating out of the structure. Each hexasilver cluster is stabilized by coordination to 6-ring, 8-ring $Rb^+$ ions, and also by coordination to a 4-ring $Ag^+$ ion.

  • PDF

Impact of Sluice Gates at Stream Mouth on Fish Community (하구의 배수갑문 설치 유무가 어류군집에 미치는 영향)

  • Kim, Jun-Wan;Kim, Kyu-Jin;Choi, Beom-Myeong;Yoon, Ju-Duk;Park, Bae-Kyung;Kim, Jong-Hak;Jang, Min-Ho
    • Korean Journal of Ecology and Environment
    • /
    • v.55 no.1
    • /
    • pp.49-59
    • /
    • 2022
  • Total of 325 estuaries in Korea were surveyed to analyze the effect of presence of sluice gate on the estuary environment and fish community from 2016 to 2018. Fish community in closed and open estuaries showed differences generally, and the relative abundance (RA) of primary freshwater species in the closed and migratory species in the open estuaries were high. The result of classifying species by habitat characteristics in closed and open estuaries showed similar tendencies at the estuaries of south sea and west sea. The relative abundances of primary freshwater species in the closed estuaries at the estuaries of south sea and west sea were the highest, but estuarine and migratory species were high in both closed and open estuaries at the estuaries of east sea. Primary freshwater species showed higher abundances in the closed estuaries with reduced salinity due to blocking of seawater since they are not resistant to salt. However, primary freshwater species in open estuaries at east sea was higher than that of the closed estuaries, which is considered to be the result of reflecting the characteristics (tide, sand bar, etc.) of the east sea. Korea Estuary Fish Assessment Index (KEFAI) was showed to be higher at open estuaries than closed in all sea areas (T-test, P<0.001), the highest KEFAI was observed in closed estuaries at south sea, and open estuaries in east sea. Fish community of closed and open estuaries in each sea areas showed statistically significant differences (PERMANOVA, East, Pseudo-F=3.0198, P=0.002; South, Pseudo-F=22.00, P=0.001; West, Pseudo-F=14.067, P=0.001). Fish assemblage similarity by sea areas showed a significant differences on fish community in closed and open estuaries at east sea, south sea, and west sea (SIMPER, Group dissimilarity, 85.85%, 88.36%, and 88.05%). This study provided information on the characteristics and distribution of fish community according to the types of estuaries. The results of this study can be used as a reference for establishing appropriate management plans according to the sea areas and type in the management and restoration of estuaries for future.