• Journal of Information Technology Applications and Management
• /
• v.13 no.4
• /
• pp.141-153
• /
• 2006

According to supply of super high way internet service, importance of security becomes more emphasizing. Therefore, flawless security solution is needed for blocking information outflow when we send or receive data. large enterprise and public organizations can react to this problem, however, small organization with limited work force and capital can't. Therefore they need to elevate their level of information security by improving their information security system without additional money. No hackings can be done without passing invasion blocking system which installed at the very front of network. Therefore, if we manage.isolation log effective, we can recognize hacking trial at the step of pre-detection. In this paper, it supports information security manager to execute isolation log analysis very effectively. It also provides isolation log analysis module which notifies hacking attack by analyzing isolation log.

• Journal of Power Electronics
• /
• v.16 no.4
• /
• pp.1256-1267
• /
• 2016

Distributed stray inductance exerts a significant influence on the turn-off voltages of power switching devices. Therefore, the design of low stray inductance bus bars has become an important part of the design of high-power converters. In this study, we first analyze the operational principle and switching transient of a T-type converter. Then, we obtain the commutation circuit, categorize the stray inductance of the circuit, and study the influence of the different types of stray inductance on the turn-off voltages of switching devices. According to the current distribution of the commutation circuit, as well as the conditions for realizing laminated bus bars, we laminate the bus bar of the converter by integrating the practical structure of a capacitor bank and a power module. As a result, the stray inductance of the bus bar is reduced, and the stray inductance in the commutation circuit of the converter is reduced to more than half. Finally, a 10 kVA experimental prototype of a T-type converter is built to verify the effectiveness of the designed laminated bus bar in restraining the turn-off voltage spike of the switching devices in the converter.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.1
• /
• pp.25-30
• /
• 2013

The piezoelectric-based hydraulic actuator is a hybrid device consisting of a hydraulic pump driven by piezoelectric stacks that is coupled to a conventional hydraulic cylinder via a set of fast-acting valves. Nowadays, such hybrid actuators are being researched and developed actively in many developed countries by requirement of high performance and compact flight system. In this research, operation principle and performance testing of the hybrid actuator were introduced. Output velocities have been measured in both loaded case and not loaded case and the blocking force also has been measured in external loaded case. The maximum velocity of the actuator is 53.3 mm/s, blocking force is 240.7 N and corresponding power output is 3.2 W.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.25 no.4
• /
• pp.401-411
• /
• 2022

As the role of high-value air assets(e.g., AWACS, JSTARS, Rivet Joint, E-2) becomes more critical in modern warfare, the air escort for these assets blocking attacks from any potential enemy fighter also becomes vital. Without the escort, the operations of the assets become restricted. However, such an escort is not always possible due to the limited flight time of the escort fighters. In this paper, we introduce an escort tactics for high-value air assets performed by the manned-unmanned teaming composed of a transport aircraft and UAVs(unmanned aerial vehicles). In this tactics, the transport aircraft plays the role of an aircraft carrier, which carries, launches, and retrieves the UAVs. The missions of UAVs in this tactics are to detect and engage enemy fighters. We also introduce the simulation result of this tactics to identify the UAVs' required capabilities and optimal maneuvering.

• Korean Journal of Materials Research
• /
• v.26 no.8
• /
• pp.417-421
• /
• 2016

We improve the energy conversion efficiency (ECE) of a dye sensitized solar cell (DSSC) by preparing a working electrode (WE) with localized surface plasmon resonance (LSPR) by inducing Au thin films with thickness of 0.0 to 5.0 nm, deposited via sputtering. Field emission scanning electron microscopy and atomic force microscopy were used to characterize the microstructure of the blocking layer (BL) of the Au thin films. Micro-Raman measurement was employed to confirm the LSPR effect, and a solar simulator and potentiostat were used to evaluate the photovoltaic properties, including the impedance and the I-V of the DSSC of the Au thin films. The results of the microstructural analysis confirmed that nano-sized Au agglomerates were present at certain thicknesses. The photovoltaic results show that the ECE reached a value of 5.34% with a 1-nm thick-Au thin film compared to the value of 5.15 % without the Au thin film. This improvement was a result of the increase in the LSPR of the $TiO_2$ layer that resulted from the Au thin film coating. Our results imply that the ECE of a DSSC may be improved by coating with a proper thickness of Au thin film on the BL.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.30 no.6
• /
• pp.1033-1043
• /
• 1997

In order to understand the generation mechanism of the Ulleung Eddy, we carried out a series of numerical experiments using the nonlinear 11/2 - layer model allowing the inflow of the Tsushima Current. According to our numerical results, the Ulleung Eddy was generated due to the inflow variations of the Tsushima Current. Its inflow through the Korea Strait was deflected to the east due to the Coriolis force and the nonlinear self advection. Thus, an anticyclonic motion was formed at the north of the Korea Strait. The inflow became a coastal boundary current, and finally flowed out model ocean through the eastern exit. When the speed of inflow decreased slowly, the eddy- like motion at the north of the Korea Strait changed into an enclosed anticyclonic eddy of about 200 km in diameter. The Ulleung Eddy became circular shape due to the nonlinear self advection, then changed into elliptical shape in meridional direction because of the blocking effect of the western boundary.

• The Korean Journal of Pharmacology
• /
• v.16 no.1 s.26
• /
• pp.35-39
• /
• 1980

In this study, the effects of phenoxybenzamine and related drugs on the action of CCK-PZ and caerulein were examined in isolated gall bladder of guinea pig and higher esophagus strip of fowl. The strips were placed in a bath containing Locke-Ringer solution maintained at $38^{\circ}C$. Oxygen was continuously bubbled through the solution. The contractile response was measured isometrically by a force displacement transducer connected to polygraph. In isolated gall bladder preparation caerulein produced contractile response of CCK-PZ type, but the relative potency on a weight basis was 30 times stronger than CCK-PZ. The response of caerulein or CCK-PZ was not blocked by cholinergic blocking agent and both alpha and beta adrenergic blockades, however, the response of caerulein or CCK-PZ was exceptionally blocked by phenoxybenzamine. In isolated esophagus strip CCK-PZ with high concentration produced marked contraction which was not modified by atropine and other blocking agents, whereas the response was blocked by phenoxybenzamine. These results lead to the conclusion that phenoxybenzamine inherently inhibits the contractile response of CCK-PZ and caerulein on esophagus and other smooth muscle.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.22 no.1
• /
• pp.10-17
• /
• 2010

The interaction of oblique incident waves with a porous dual semi-cylindrical structure is investigated under the assumption of linear potential theory. The porous dual semi-cylindrical structure consists of two concentric bottom-mounted cylindrical structures that are porous in front half and transparent in back half. By changing porosity, gap, and wave characteristics(wave frequencies, incidence angle), the wave blocking performance as well as the wave loads and the wave run-up are obtained. As a convenient measure of overall wave blocking performance, the root mean square(R.M.S.) of the wave elevation in a sheltered region is used. It is found that the porous semi-cylindrical structure may significantly reduce the wave response in a sheltered region and the wave forces decrease largely compared to the impermeable structure. The dual structure is more effective in reducing the wave response in a sheltered region than the mono type in the region of high frequencies.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.12
• /
• pp.482-487
• /
• 2016

Ultra-violet rays are very harmful to eye health care. The blocking of ultra-violet rays and a reduction of optical reflection in the visible light range, which is to increase the share of transmitted light, and avoid the formation of ghost images in imaging, are important for the applications of polymer eyeglasses lenses. In this study, the high-refractive index polymer lenses, n=1.67, were fabricated by injection-molded method with the xylene diisocyanate monomer, 2,3-bis-1-propanethiol monomer, and benzotriazol UV absorber (SEESORB 709) mixture. To reduce the reflection of the polymer lens surfaces, multi-layer anti-reflection (AR) coatings were coated for both sides of the polymer lens using an E-beam evaporation system. The optical properties of the UV blocking polymer lens were characterized using a UV-visible spectrometer. The material properties of the thin films, which were composed AR coating layers, refractive index, and surface roughness, were analyzed by ellipsometry and atomic force microscopy. As a result, the fabricated polymer lens perfectly blocked ultra-violet rays below 395 nm with a blocking rate greater than 99%.

• Fashion & Textile Research Journal
• /
• v.14 no.2
• /
• pp.294-303
• /
• 2012

This study was designed to develop air force mechanic parka, evaluate it, and ultimately provide functionally superior parka to the air force. The development process was 1) conducting a survey, 2) identifying problems and shortcomings of currently-supplied parkas, and 3) improving the design, pattern and materials. The newly-developed parkas were evaluated in terms of their ease of fit, clothing mobility, and insulation. Ease of fit was evaluated by subjects' sensory tests, and clothing mobility was by fitness-for-motion tests and range-of-motion tests using a Goniometer. Evaluation on insulation was conducted by thermal manikins. Findings of this study were as follows: 1. In the subjective evaluation on clothing mobility, new parkas were considered to have sufficient ease of fit while previous ones scored much lower, confirming the improvement of the new version. 2. Both subjective tests and ROM measurements on fitness for motion verified the superiority of the new parkas. 3. Insulation tests found that although insulation capability of newly-developed parkas was at a similar level to those of the previous ones, their insulation capability per unit weight was superior, demonstrating that new parkas were better at blocking heat conduction. When making changes in parka patterns and designs to enhance the mobility, it was necessary to maintain the insulation function. The new parkas developed by this study was verified to be superior to the previous ones in their insulation and clothing mobility.