• Land and Housing Review
• /
• v.4 no.3
• /
• pp.259-270
• /
• 2013

This paper defined the concept of unsold land and diagnosed the cause of unsold land of LH business site. The results are showing as follows. First, unsold land is defined as land could not be sold until the completion of the project, and plan to sell the unsold land can be changed partially. Second, the status of unsold land in the 226 project sites were analyzed. $146km^2$ area corresponding to 74.8% of the total capital area($195km^2$) are unsold. By purpose, co-residential($38km^2$), industry($21km^2$), exclusive residential($16.4km^2$), commercial business($12.5km^2$), education($10.2km^2$) was larger in order. Third, value enhancement target project sites were selected and its symptoms and the cause of unsold land were analyzed. For the project site over average unsold rate, 6 sites located in province and 2 sites located in capital region were selected through collecting the practitioners and expert opinion. These 8 sites are characterized that sale of land for medium and large co-residential, urban support facilities, block-shaped house and attached house was inactive. Also, these sites commonly experienced economic fluctuations, changes in market demand, supply and demand mismatch, inflexible planning standards.

• Pediatric Infection and Vaccine
• /
• v.22 no.3
• /
• pp.136-142
• /
• 2015

The Korean Society of Pediatric Infectious Diseases (KSPID) has participated in the task force team consisting of government authorities as well as civil medical experts and facilities to block the spread of Middle East Respiratory Syndrome in 2015. KSPID posted the "Middle East Respiratory Syndrome (MERS) Pop-up" in the homepage of The Korean Pediatric Society and The Korean Society of Pediatric Infectious Diseases. KSPID also released the "Guidelines for testing for MERS in children and adolescents" and the "Instructions for the Operation of National Safe Hospital" for children and adolescents in a timely manner. Such actions were aimed to prevent unnecessary anxieties, studies and isolation of pediatric patients with respiratory symptoms and signs caused by other common microbial etiologies as being suspected for MERS patients. This strategy relieved the doctors and parents from unnecessary fear and prevented the loss of unnecessary health care costs, and has proven to be a well-judged guideline and management protocol as evaluated after the final end of MERS outbreak. KSPID and its members should support the presence of pediatric infectious disease (PID) specialists in every medium size hospitals in Korea by developing the need for consultation fees for PID consultation in the hospital based practice and promoting the potential for cost savings related to prevention of health care associated infections and optimal prescription of antimicrobial agents. KSPID and its members need to approach and develop a communication plan to political decision makers to demonstrate and convince them of the importance of a PID specialist service.

• Journal of the Korea Institute of Building Construction
• /
• v.21 no.5
• /
• pp.483-493
• /
• 2021

Urban overcrowding has created an explosive supply and demand for high-rise buildings. High-rise buildings are contributing to enhancing the image of the city by serving as focal points, but due to the stack effect, malfunction of elevator doors, difficulties in opening and closing the doors and windows of the outer wall, smoke and odors spreading to the upper floors, noise, energy loss, fire and pollutants have been causing various unexpected problems such as rapid spread of fire. This study classified high-rise buildings according to their vertical zoning, analyzed the causes of and solutions to the stack effect, and derived design and construction methods. Through the initial plan to block the outside air and securing airtightness through precise construction, we sought ways to secure the airtightness inside and outside the building by actively blocking the airflow from the lower floors. In addition, the facility solution can be a measure to reduce the specific phenomena caused by the stack effect, but it should only be applied to the minimum extent because the potential for secondary damage is high. This study emphasized the need for systematic stack effect management by suggesting design and construction measures for each vertical zoning of the causes and countermeasures of the stack effect. It is expected that this study will be helpful not only for design and construction, but also for building maintenance.

• Journal of Internet of Things and Convergence
• /
• v.8 no.6
• /
• pp.93-97
• /
• 2022

The purpose of this study is to suggest implications for early childhood SW·AI education considering the characteristics of early childhood education through a survey on SW·AI education in kindergartens. For this study, data were collected from 194 kindergartens through convenience sampling. The data was analyzed using frequency distribution, and it was found that 44% of kindergartens are conducting SW·AI education. 22% are conducting SW·AI education in the form of regular curriculum, and 70% are conducting SW·AI education in the form of special activities after school. SW·AI education was found to be conducted mainly by external instructors (97%) in the classroom (80%). For SW·AI education, block coding-based programs developed by companies such as Naver and the Clova were used, and all of these programs used programs and teaching aids in a package format, including teaching aids and materials developed by companies. 56% answered that they are not currently conducting SW/AI education, and lack of awareness on SW·AI education and lack of human/environmental infrastructure were the main factors. In order to realize SW·AI education considering the characteristics of early childhood education based on this survey, First, SW·AI education programs should be developed to develop play-centered computational thinking skills. Second, systematic teacher education at the national level should be conducted. Finally, the establishment of a department dedicated to early childhood SW·AI consisting of early childhood education experts and SW·AI education experts and financial support at the national level should be provided.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.37 no.1
• /
• pp.48-60
• /
• 2021

Patients who have extruded anterior teeth and deep bite with pathologic tooth migration, it is necessary not only periodontal treatment for reduce inflammation, but also orthodontic treatment for intrusion of anterior teeth. However, it is difficult to place the orthodontic brackets due to the deep bite, and there is a problem that the extrusion of the posterior teeth occurs more easily than the intrusion of the anterior teeth biomechanically. In particular, in patients with long face, relative intrusion of the anterior teeth by extrusion of the posterior teeth causes the clockwise rotation of the mandible and makes the facial profile worse. Therefore the biomechanical consideration and appliance design that can block these problems are required from the treatment plan. This is a patient who had a deep overbite with extruded anterior teeth, treated by periodontal treatment and intrusion of mandibular anterior teeth using cute brackes and miniscrews, and resulted in favorable maintenance during 8-year retention.

• Convergence Security Journal
• /
• v.20 no.4
• /
• pp.187-196
• /
• 2020

In order to manage information security risk, various information security level evaluation and information security management system certification have been conducted on a larger scale than ever. However, there are continuous cases of infringement of information protection for companies with excellent information security evaluation and companies with excellent information security management system certification. The existing information security risk management methodology identifies and analyzes risks by identifying information assets inside the information system. Existing information security risk management methodology lacks a review of where cyber threats come from and whether security devices are properly operated for each route. In order to improve the current risk management plan, it is necessary to look at where cyber threats come from and improve the containment level for each inflow section to absolutely reduce unnecessary cyber threats. In addition, it is essential to measure and improve the appropriate configuration and operational level of security equipment that is currently overlooked in the risk management methodology. It is necessary to block and enter cyber threats as much as possible, and to detect and respond to cyber threats that inevitably pass through open niches and use security devices. Therefore, this paper proposes additional evaluation items for evaluating the containment level against cyber threats in the ISMS-P authentication items and vulnerability analysis and evaluation items for major information and communication infrastructures, and evaluates the level of security equipment configuration for each inflow.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.12
• /
• pp.9-16
• /
• 2022

In this paper, we propose a plan to design and utilize the RDBS(Record Block Data file management System) so that data can be recovered when data files in the Combat Management System are mismatched. The CMS(Combat Management System) manages the same files in multiple IPN(Infomation Processing Node) repositories to support multiplexing. However, mismatches in data files can occur due to equipment maintenance or user immaturity. The existing CMS does not manage the history of changes in data files, and when a mismatch occurs, data file were synchronized based on the latest date. But, It is difficult to say that files with the latest date have the highest reliability, and once the file synchronization has progressed, it cannot be recovered with pre-synchronization data. To solve this problem, data was stored and synchronized in units of record blocks using RDBS proposed in this paper, and the Rsync algorithm was used to reduce the overhead of file synchronization due to units of record blocks. SW applied with RDBS was tested for performance in a simulated environment, and it was confirmed that it could be applied to CMS through normal operation confirmation.

• Journal of the Society of Disaster Information
• /
• v.19 no.1
• /
• pp.1-9
• /
• 2023

In order to carry out construction work, it is urgent to introduce a proper wage system so that the cost burden of projects that have been won due to bleeding competition among original government buildings based on low-priced bids can be transferred to subcontractors. Purpose: Construction with illegal multi-level industrial structure needs to improve the wage reduction environment leading to order (100%) → original contractor (80%) → subcontractor (65%) → load contractor (65%) and aims to ensure wages for end workers. Method: Investigate the current status of labor cost appropriate payment plan in the construction industry, and investigate the case of the appropriate wage system (P.W) in the United States. In addition, the effect and direction of the appropriate wage system are presented. Result: Individual minimum wage security was also mentioned in the Constitution, and many researchers suggested that only the introduction of an appropriate wage system could solve the problem of reducing worker labor and ensure quality and safety. Conclusion: The proper wage system in the construction industry will block illegal multi-level and illegal foreign work, improve the labor environment in the construction market, create an influx of young workers, and have a significant impact on the construction industry's competitive structure, safety, and quality.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.7
• /
• pp.1267-1273
• /
• 2022

Although the Korea shipbuilding industry has recently been receiving most of the orders for ships in the world, production processes are being disrupted due to a shortage of manpower at the production site. This is because the workers quit the shipyard as both work and wages were reduced due to the long slump in the shipbuilding industry. The main reason for the increase in orders was the large-scale orders for Qatar LNG carriers, and the situation in which the technical specifications required for ships are becoming more complex is also working to an advantage. Because the contract delivery time is of utmost importance for ships, the dock launch plan is the most important management item among the shipyard's major processes. The structure to be built in the dock may be a hull that has left the design work or a finished vessel, and in some cases, it is often at the level of some blocks of the hull. When launching, the hull is affected by the hogging or sagging moment due to the fluid force, and securing the safety of the structural strength of the block connection is of utmost importance. In a normal process, the connecting member launches after welding has been completed, but in actual shipbuilders, quick decision-making is needed on the conditions for securing structural safety to comply with the docking schedule. In this study, a detailed analysis method and applicability using a bending stress evaluation method and finite element analysis modelling were analyzed to rationally judge the above-mentioned problems from an engineering point of view. The main contents mentioned in the thesis can be used as good examples when conducting similar structural strength evaluations in the future.

• Radiation Oncology Journal
• /
• v.21 no.2
• /
• pp.174-181
• /
• 2003

Purpose: The target volume for the three field technique in breast cancer include the breast tangential and supraclavicular areas. The techniques rotating the gantry and couch angles, to match these two areas, will geometrically produce mismatching of the posterior edge between the medial and lateral tangential beams. This mismatch was confirmed by film dosimetry and three-dimensional computer planning. The correction methods of this mismatching were studied in this article. Materials and Methods: After the supraclavicular field was simulated using a half beam block and the medial and lateral tangential fields, by the rotation of the couch and gantry, we compared the following two methods to correct the mismatch. The first method was the rotation of coillmator until a line drawn on the posterior edge of tangential beams before the rotation of couch aligned the line drawn on the posterior edge after the rotation. The second method was the rotation of collimator according to the formula developed by the author as follows; Co=$2sin^{-1}${$sin\{theta}\{cdot}sin(C/2)$} (Co: collimator angle, $\theta$: angle between tangential beam and table, C: couch angle) Results: The film dosimetry showed the mismatching of posterior edges of the medial and lateral tangential fields prior to the rotation of collimator, while the posterior edges matched well after the rotation of collimator according to the formula. The three-dimensional computer plan also showed that the posterior edges matched well after the rotation of collimator accordingly. The DVH of the ipsilateral lung with the proper rotation of collimator angle was better than that without the rotation of collimator angle. Conclusion: The mismatching of the posterior edges of the medial and lateral tangential fields can be recognized on the three fileld technique in breast irradiation when the gantry and couch are simultaneously rotated and can be corrected with the proper rotation of the collimator angle. The radiation dose to the ipsilateral lung could be lowered with this technique.