• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.1
• /
• pp.59-65
• /
• 1999

In this paper, we design a entorpy encoder of HDTV/DTV encoder blocks on the basis of MPEG-II. The designed entropy encoder outputs its bit stream at 9Mbps bit rate inserting zero-stepping block to protect the depletion of buffer in case that the generated bit stream is stored in buffer and uses not only PROM bit combinational circuit to solve the problem of critical path, and packer block, one of submerge, is designed to packing into 24 bit unit using barrel shifter, and it is constructed to blocks of header information encoder, input information delay, submerge, and buffer control. Designed circuits is verified by VHDL function simulation, as a result of performing P&R with Gate compiler that apply $0.8{\mu}m$ Gate Array specification, pin and gate number of total circuits has been tested to each 235 and about 120,000.

• Korean Institute of Interior Design Journal
• /
• v.18 no.6
• /
• pp.202-210
• /
• 2009

This research was undertaken to prove the relationship between street mall activation and architectural plan design. The research methodology was established based on the analysis of data of two existing street malls in Korea (Western Dome & LaFesta) and theoretical studies of outdoor space design. The findings from this study are the following: First, building blocks with segments in every 50m or so are ideal for detailed communication between visitors and building contents. Second, the ratio of width of main corridor and building height should be less than 1 to provide intimate feel and keep visitors' attention concentrated in the facility. Third, store unit should have more storefronts to be exposed more to passers-by and lead more pedestrian traffic. Fourth, shape of store unit would rather be wide and shallow, instead of narrow and deep, to have more exposure to the central corridor. Fifth, the building block of the busiest(most expensive) area that is usually at the main entrance area of street mall should be flexible to fit more smaller units to maximize the profitability. Sixth, the main entrance of store should face the main pedestrian corridor to induce the influx of visitors. Lastly seventh, anchor tenant that has strong name recognition is usually located on basement or higher level to induce pedestrian traffic into the mall, key tenants that are strong and familiar brand names should be located at the corner of building block with spacing to attract visitors, provide even distribution of traffic, and support wayfinding, and local tenant should be located at small units along the central corridor or remainder spaces occurred from building core layout.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.25 no.1
• /
• pp.17-27
• /
• 2019

Purpose: Clinical laboratory in hospital has taken a great role in protection of chronic disease. as well as diagnosis and treatment, And laboratory layout has been considered by the management and laboratory section more than the function and workflow. Methods: So this study figures out the workflows of laboratory sections in the recently upgraded Laboratory Medicine, and searches the functional relationships and spatial block diagram between each disciplines as follows. Literature review and expert adviser has been conducted. Results: 1) Laboratory type of Laboratory Medicine is divided into routine and specialized laboratory according to the workflow by automated or specialized test. 2) The general workflow consists of specimen collection, specimen classification, test by discipline, test report, and specimen disposal. 3) Though the function of each laboratory section is very complicated and specific, the characteristics and the workflow can be shown in detail by each lab through [Figure 4], [Figure 5], [Figure 6], [Figure 7], and [Figure 8]. 4) Functional relationship diagram can be displayed to the adjacency and relation between each laboratory and support spaces. 5) The spatial block diagram could be presented as shown in [Figure 10], in which the emergency lab lay in front side, routine lab in the central open area, and specialized lab in the behind side. Implications: This study can be used as a useful data in planning and designing a Laboratory Medicine Department.

• Korean Institute of Interior Design Journal
• /
• v.20 no.2
• /
• pp.139-146
• /
• 2011

An attempt is made to illuminate the characteristics of Korean high-rise apartment plans built after the 1990s in Seoul. Unlike the typical slab block plans of the past century, these plans were accommodated in a super-highrise building which normally integrates some portion of commercial areas on the lower floors. Thus, they are much different from the pre-1990s plans, so needs to have different strategy to adapt to the Korean dwellers' domestic requirements. This study reveals the topological patterns that appear in these new plans, and tries to relate these patterns to the old configuration patterns of the slab-type apartment houses. From the analysis, it was found that some important Korean dwellers' characteristics are still preserved, but at the same time, some unprecedented patterns were beginning to be absorbed into the spatial arrangement. At the end, suggestions are made on how this emerging trend of super-high rise can be better understood and evolved to enhance the living quality in a new multi-unit setting.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2002.11c
• /
• pp.2347-2350
• /
• 2002

본 논문에서는 일반 데스크탑 PC의 디스플레이 성능에 적합하도록 작성된 유선의 웹 문서를 무선 인터넷 환경의 핸드헬드 계열 소형 단말에서도 효율적으로 표현하기 위한 변환 기법을 제시한다. 이는 기존의 단순한 텍스트 위주의 추출 및 형식의 변환과는 달리, 분석 및 변환을 위한 최소 내용 단위를 설정하고, 이들의 재배치를 통하여 원본 웹 문서의 정보를 보다 정확히 반영한다. 또한 새로운 인덱스 형식으로의 재표현을 통하여 기존의 페이지 조각과 계층적 구조의 인덱스 링크를 이용한 인터페이스보다 편리한 검색 및 페이지 이동을 제공한다. 이 기법은 보다 많은 정보를 복잡한 구조로 표현하는 현재의 웹 문서 특징을 반영하고, 이동 단말들의 고성능화 추세와 함께 화려한 무선 인터넷을 요구하는 사용자들을 고려한 것이다. 전체 변환 과정은 Layout-Forming Tag Analysis Algorithm, Component Grouping Algorithm Component Block Classification Method, Index Generation Method로 구성된다. 변환 시스템의 구성 모듈별 설계와 프로토타입의 구현을 통하여 제안하는 알고리즘 및 변환 방법을 평가하였고, 실제 웹 문서에 대한 실험 결과에서 단말의 소형 화면에 적합하게 변환된 모습을 확인하였다.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.1121-1124
• /
• 2002

In this paper, an IC realization of a cell-network type SC DC-DC converter is reported. To achieve small and low-cost realization, the converter is designed by using a 1.2 $\mu\textrm{m}$ CMOS technology. The CMOS implemented converter will be useful as a building block of various mobile equipments since step-up and step-down voltages can be provided at one time. Concerning the proposed DC-DC converter, SPICE simulatiorls are performed to investigate the characteristics of the circuit. The SPICE simulations show that, the efficiency of the simulated circuit is more than 95 %. From the layout design using a CAD tool, MAGIC, the VLSI chip is fabricated in the chip fabrication program of VLSI Design and Education Center(VDEC), the University of Tokyo with the collaboration by On-Semiconductor. The proposed circuit is integrable by a standard 1.2 $\mu\textrm{m}$ CMOS technology.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2002.11a
• /
• pp.63-68
• /
• 2002

JPEG2000은 기존의 정지영상압축부호화 방식에 비해 우수한 비트율-왜곡(Rate-Distortion)특성과 향상된 주관적 화질을 제공하며 인터넷, 디지털 영상카메라, 이동단말기, 의학영상 등 다양한 분야에서 적용될 수 있는 새로운 정지영상압축 표준이다. 본 논문에서는 SoC(System on a Chip)설계를 고려한 JPEG2000 인코더의 구조를 제안하고 IP(Intellectual Property)를 설계 및 검증하였다. 구현된 JPEG2000 IP는 DWT(Discrete Wavelet Transform)블록, 스칼라양자화블록, EBCOT(Embedded Block Coding with Optimized Truncation)블록으로 구성되어 있다. IP는 모의실험을 통해 구현 구조에 대한 타당성을 검증하였고, 반도체설계자산연구센터에서 제시한 'RTL Coding Guideline'에 따라 HDL을 설계하였다. 특히, DWT블록은 구현시 많은 연산과 메모리 용량이 필요하므로 영상을 저장할 외부 메모리를 사용하였고, 빠른 곱셈과 덧셈연산을 위한 3단 파이프라인 부스곱셈기(3-state pipeline booth multiplier)와 캐리예측 덧셈기(carry lookahead adder)를 사용하였다. 설계된 JPEG2000 IP들은 삼성 0.35$\mu\textrm{m}$ 라이브러리를 이용하여 Synopsys사 Design Analyzer 틀을 통해 논리 합성하였으며, Xillinx 100만 게이트 FPGA칩에 구현하여 그 동작을 검증하였다. 또한, Hard IP 설계를 위해 Avanti사의 Apollo툴을 이용하여 Layout을 수행하였다.

• KIEAE Journal
• /
• v.9 no.6
• /
• pp.13-18
• /
• 2009

Korean traditional houses have been developed in harmony with natural environment and comfortable indoor condition by using the natural resources including building layout, space composition and materials. Originally Korea traditional architectures have used wood lintel constructions and loess walls through the many years. Theses loess have many strength such as highly heat capacity, controling of humidity, a deodorant than any other materials. Nowaday it is recommended to use exterior and interior walls in loess wall to meet the eco-friendly materials to improve our residental environmental. Thus this study aims to research the sound insulation performance of traditional loess brick wall varied with thickness, thermal insulation materials and cavity wall. The sound insulation performance of these loess walls are compared with other masonry wall's and sound insulation performance of th walls were tested in anechoic laboratory to measure the sound transmission loss of these walls. The loess brick wall with 75mm thickness of cavity is shown the sound insulation performance with Rw 57 which is nearly same performances of 1B brick wall and cement 8' block wall, The improving effect of insulation materials is shown in the high frequency bandwidth. Especially, there is improving as much as 11 dB using the extruded poly stylene form(75mm) and poly ethylene film(0.7mm).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.7A
• /
• pp.568-573
• /
• 2009

This paper presents a step-down DC-DC converter with On-chip Compensation for battery-operated portable electronic devices which are designed in O.13um CMOS standard process. In an effort to decrease system volume, this paper proposes the on chip compensation circuit using capacitor multiplier method. Capacitor multiplier method can minimize error amplifier's compensation capacitor size by 10%. It allows the compensation block of DC-DC converter be easily integrated on a chip and occupy less layout area. But capacitor multiplier operation reduces DC-DC converter efficiency. As a result, this converter shows maximum efficiency over 87.2% for the output voltage of 1.2V (input voltage : 3.3V), maximum load current 500mA, and 25mA output ripple current. This voltage mode controled buck converter has 1MHz switching frequency.

• The Southeast Asian review
• /
• v.22 no.1
• /
• pp.207-245
• /
• 2012

With rapid industrialization and urbanization, numerous cities are faced with urban slum phenomenon combined with housing shortage fueled by population explosion. In Kuala Lumpur, the capital city of Malaysia, the government hereby embarked on supply of public housing to resolve such pending issue. This study aims to understand the periodic changes of public housing as a common basis for basic housing policies with analysis specific features of site plan, block layout, and unit plans. For this purposes, the filed survey during January, 2011 were proceeded. We hereby visited and surveyed a total of 40 apartment complexes for the 1970s~the 2000s (10 complexes respectively on a decade basis). Consequently, Malaysian public apartments prove to offer a very uniform pattern based upon standard plans. Their early plans aren't fairly distincted from those of other countries, but their layouts of plan become differentiated compared with other nations as they actively apply a ventilator called 'air well' in response to tropical climate amid the change of times. This study is expected to broaden our understanding of Malaysia's unique housing culture and lifestyle.