• 제목/요약/키워드: Block layout

검색결과 145건 처리시간 0.02초

Research on a simulation-based ship production support system for middle-sized shipbuilding companies

  • Song, Young-Joo;Wo, Jong-Hun;Shin, Jong-Gye
    • International Journal of Naval Architecture and Ocean Engineering
    • /
    • 제1권2호
    • /
    • pp.70-77
    • /
    • 2009
  • Today, many middle-sized shipbuilding companies in Korea are experiencing strong competition from shipbuilding companies in other nations. This competition is particularly affecting small- and middle-sized shipyards, rather than the major shipyards that have their own support systems and development capabilities. The acquisition of techniques that would enable maximization of production efficiency and minimization of the gap between planning and execution would increase the competitiveness of small- and middle-sized Korean shipyards. In this paper, research on a simulation-based support system for ship production management, which can be applied to the shipbuilding processes of middle-sized shipbuilding companies, is presented. The simulation research includes layout optimization, load balancing, work stage operation planning, block logistics, and integrated material management. Each item is integrated into a network system with a value chain that includes all shipbuilding processes.

공동주택 경관평가를 위한 시각밀도 지표에 관한 연구 입면차폐도와 규제지침을 중심으로 (An Visual Density Index for the Housing Landscape Evaluation Focused on the Elevation Coverage Index)

  • 강인호;이승미
    • 한국주거학회논문집
    • /
    • 제15권3호
    • /
    • pp.53-62
    • /
    • 2004
  • Recently the landscape of housing has been emphasized. This trend seems to reflect the negative aspects of housing landscape in urban area. Throughout the analysis on the various visual density index, the following findings were obtained; 1) Elevation blockage ratio(EBR) was permitted differently according to the types of housing blocks, and the preference of block layout was different to the location of site. 2) EBR regulation level was acceptable. But 40m level of general area should be stepped up to the 35m level. 3) The correlation between the floor area ratio(FAR) and the EBR was not high. Therefore it is reasonable to regulate the EBR to the location. 4) Elevation coverage ratio(ECR) was highly correlated with the FAR. It means that FAR can substitute for the ECR, and ECR should be regulated to the level of FAR.

중정형 공동주택의 공간계획 특성 연구 (A Study on the Characteristics of Court Housing Design in Korea)

  • 강인호;박소영
    • 한국주거학회:학술대회논문집
    • /
    • 한국주거학회 2005년도 추계학술대회 논문집
    • /
    • pp.263-268
    • /
    • 2005
  • The aim of this study was to analyse the design characteristics of court housing. In spite of changes of housing design condition, especially density, there have been changes only in the height of housing block, not in the housing types, layout system and other design properties. Due to the situation, housing design in Korea has been criticised as too routine and monotonous one. As one of the alternatives to respond to the criticism, this study focused on the positive aspects of the court housing type, and suggested the design strategies throughout the analysis of 8 entries in the design competition of EunPyeong NewTown, which attempted to overcome the negative problems - mainly the daylighting, orientation, and privacy- of this housing type. Throughout the analysis, there suggested design strategies to respond to the problems of court housing type, which can be the basis for the court housing design in Korea.

  • PDF

컨테이너 터미널의 차세대 안벽크레인 생산성 비교분석 (A Comparative Study on Productivity of Next Generation Quay Crane in Container Terminal)

  • 하태영;최용석
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2004년도 추계학술대회
    • /
    • pp.297-302
    • /
    • 2004
  • 본 연구에서는 수직배치형 블록을 가지는 컨테이너 터미널을 대상으로 안벽에서 컨테이너의 양${\cdot}$적하 작업을 담당하는 안벽크레인(Q/C)에 대한 하역생산성을 비교분석하였다. 분석 대상이 되는 안벽크레인의 유형은 기존의 싱글트롤리 타입외에 차세대 안벽크레인으로 인식되고 있는 듀얼트롤리, 더블트롤리, 수직순환식의 하역방식을 가지는 장비에 대한 하역생산성을 순작업시간당 생산성 측면에서 이들 하역장비의 성능을 측정해 보았다. 이들 차세대 컨테이너 크레인은 기존의 싱글트롤리 타입의 장비에 비해 기계적 싸이클 타임이 짧으며, 선회방식이 상이하여 현재의 싱글 트롤리타입보다 하역생산성이 매우 높을 것으로 보고 있다. 본 연구의 결과로 제시된 4가지 유형의 안벽크레인에 대해 작업싸이클타임과 시뮬레이션 기법을 이용하여 기계적생산성과 순작업생산성을 산출하였다.

  • PDF

MPEG-7의 EHD와 CLD를 조합한 영역기반 영상검색 (Region-based Image retrieval using EHD and CLD of MPEG-7)

  • 류민성;원치선
    • 전자공학회논문지CI
    • /
    • 제43권1호
    • /
    • pp.27-34
    • /
    • 2006
  • 본 논문에서는 영상의 에지와 칼라 분포를 부영상(sub-image)의 단위로 기술하기 위해 MPEG-7의 여러 가지 서술자 중 에지히스토그램 서술자(EHD: Edge Histogram Descriptor)와 컬러레이아웃 서술자(CLD: Color Layout Descriptor)를 조합한 영역기반 영상 검색 시스템을 제안한다. 영상 내의 관심영역 (ROI) 선택의 기본 단위는 영상 공간을 $16(4{\times}4)$개의 겹치지 않는 영역으로 분할한 EHD의 부영상 블록이다. 따라서 영상 특징 벡터에 대한 블록-대-블록의 일-대-일 대응 관계를 유지하기 위해 CLD의 기술자는 $8{\times}8$ 역 DCT (IDCT)를 통해 $4{\times}4$의 각 부영상에 대응하는 컬러 특징을 생성한다 제안된 방법이 MPEG-7의 기술자에 대해 관심영역기반 영상 검색에 적용될 수 있음을 실험을 통해 제시하였다.

자동차 엔진공장의 크랭크샤프트 라인설계를 위한 시뮬레이션 사례연구 (A Case Study of Simulation for the Design of Crankshaft Line in an Automotive Engine Shop)

  • 문덕희;허특;신우영
    • 한국시뮬레이션학회논문지
    • /
    • 제17권2호
    • /
    • pp.1-12
    • /
    • 2008
  • 자동차 엔진을 구성하는 주요부품은 실린더블록, 실린더헤드, 크랭크샤프트, 커넥팅로드, 캠샤프트 등으로 구성되는데 이들의 영문명을 따서 5C라고 부른다. 따라서 일반적으로 엔진공장은 5C를 생산하는 라인과, 엔진 조립라인을 포함하는 6개의 라인으로 구성이 된다. 엔진공장은 소품종대량생산의 특성을 가지기 때문에 장비의 배치형태는 흐름라인의 형태를 따른다. 본 논문에서는 국내 자동차 회사 엔진공장의 크랭크샤프트라인 설계를 위한 시뮬레이션 사례를 소개한다. 크랭크샤프트 라인은 기계가공을 중심으로 하는 라인이다. 따라서 라인설계에 영향을 미치는 요인들에 대해 소개하고, 라인 효율에 미치는 영향을 $QUEST^{(R)}$라는 3차원 시뮬레이션 도구를 이용하여 분석하였다. 기술팀에서 제시한 초기배치안에 대해 시뮬레이션 모델을 구축한 후 실험을 통하여 시스템 효율을 개선시키기 위한 방법을 제시하였다.

  • PDF

소규모 VOD 시스템의 저장 서버로서 디스크 배열 구조의 분석 (Analysis of Disk Array Architecture as a Storage Server of a Small-Sacle VOD Server)

  • 고정국;김길용
    • 한국정보처리학회논문지
    • /
    • 제4권3호
    • /
    • pp.811-820
    • /
    • 1997
  • 대용량의 저장 공간과 고속 통신망을 갖춘 고성능 저장 장치를 필요로 하는 멀티미디어 응용에서는 데이터 전달 속도와 입출력 성능을 향상시키기 위해 디스크 배열이 사용되고 있다. 디스크 배열은 구성 방법및 데이터 할당 방법등에 따라 성능의 차이를 보이므로 디스크 배열을 설계 할 때 해당 응용에 적합한 디스크 배열 특성 변수가 결정되어야 한다. 본 논문에서는 소규모 VOD 시스템의 저장 서버로서 사용될 디스크 배열의 구조를 결정하기 위한 연속 매체 파일 시스템의 데이터 불럭 크기와 입출력 요구의 크기가 주어질 때 디스크 배열 구성 디스크수, 디스크 배열 구성과 디클러스터링 정도를 권장하기 위해 시뮬레이션을 통해 성능을 평가하였다. 시뮬레 이션을 통해 6Mbps의 MPEG-2파일을 제공하는 디스크 배열의 구조는 스트라이핑 단위가 64-KB 이며, 데이터 불럭이 연속 배치되어 있는 5개의 디스크로 구성된 RAID-5가 가장 적합한 것으로 나타났다.

  • PDF

신라사천왕사건축(新羅四天王寺建築)의 설계기술(設計技術) 고찰(考察) (Study on the Planning Method of the Sacheonwangsa Temple Architecture in Silla)

  • 이정민;미조구치아키노리
    • 헤리티지:역사와 과학
    • /
    • 제53권3호
    • /
    • pp.80-109
    • /
    • 2020
  • 신라사천왕사는 670년 '조창(祖創)'된 이후 '개창(攺刱)'을 거쳐 679년에 낙성된 밀교사원이다. 본 연구는 근년의 발굴조사 성과와 사원건립과정 및 조영척도에 관한 고찰 결과를 바탕으로, 사천왕사건축의 설계기술 해명을 시도한 것이다. 연구결과는 다음과 같다. (1) 부지 조성에 있어서는, 낭산 남록 상에 1방(坊)의 크기를 상정, 그 남북 폭을 3등분한 후, 그 중 2구획분을 평탄부로 설정했을 가능성이 있다. (2) '조창'에 있어서는, 평탄면 남단을 경계로 하여 300척(尺)평방의 규모를 상정, 그 중심에 '선축기단'을 축조했던 것으로 추정되는데, 초기구상으로써 문두루(신인(神印))의 장치를 목적으로 한, 외원 2주(肘)(3척(尺)), 내원 1주(肘)(1.5척(尺))의 단(壇) 평면 의장을 자체 고안, 그것의 100배를 중심곽 규모 및 배치 계획에 있어서의 근거로 설정해 두었을 가능성이 있다.(3) '개창'에 있어서는, '선축기단'의 중심을 금당 중심으로 고수할 경우 발생되는 목탑·금당간거리 협소 문제를 인지, 초기구상으로부터 중심곽 규모 및 배치를 조정했던 것으로 판단된다. (4) 당탑 및 단석의 배치는, 확정된 중심곽 규모(280척(尺)×320척(尺))를 대상으로 한 분할에 기초해 결정되었는데, 동서방향에 있어서는 중심곽 동서 폭을 4등분하는 선상으로 정한 반면, 남북방향에 있어서는 중심곽 짜임새상의 특성에 입각, 동서회랑의 도리칸 분할과 조정을 통해 익랑 위치를 확정한 후, 이를 기준해 금당·단석을 배치했다고 추정된다. (5) 당탑 및 단석 등의 규모는 각 건물의 정면 기단 폭에 의해 제어되었던 것으로 인정된다. 특히 금당·목탑의 규모는 중심곽 동서 폭의 4등분으로부터 시작되는 단위분수적 분할의 반복을 통해 결정된 것으로 판단되는데, 이는 단의 평면의장을 전형으로 한 자기유사성에 연원을 둔 것으로 이해된다.

그래픽 DRAM 인터페이스용 5.4Gb/s 클럭 및 데이터 복원회로 (A 5.4Gb/s Clock and Data Recovery Circuit for Graphic DRAM Interface)

  • 김영란;김경애;이승준;박성민
    • 대한전자공학회논문지SD
    • /
    • 제44권2호
    • /
    • pp.19-24
    • /
    • 2007
  • 최근 대용량 데이터 전송이 이루어지면서 하드웨어의 복잡성과 전력, 가격 등의 이유로 인하여 입력데이터와 클럭을 함께 수신 단으로 전송하는 병렬버스 기법보다는 시리얼 링크 기법이 메모리 인터페이스에 많이 사용되고 있다. 시리얼 링크 기법은 병렬버스 기법과는 달리 클럭을 제외한 데이터 정보만을 수신단으로 보내는 방식이다. 클럭 및 데이터 복원 회로(clock and data recovery 혹은 CDR)는 시리얼 링크의 핵심 블록으로, 본 논문에서는 그래픽 DRAM 인터페이스용의 5.4Gb/s half-rate bang-bang 클럭 및 데이터 복원회로를 설계하였다. 이 회로는 half-rate bang-bang 위상검출기, current-mirror 전하펌프, 이차 루프필터, 및 4단의 차동 링타입 VCO로 구성되었다. 위상 검출기의 내부에서 반 주기로 DeMUX된 데이터를 복원할 수 있게 하였고, 전체 회로의 용이한 검증을 위해 MUX를 연결하여, 수신된 데이터가 제대로 복원이 되는지를 확인하였다. 설계한 회로는 66㎚ CMOS 공정파라미터를 기반으로 설계 및 layout하였고, post-layout 시뮬레이션을 위해 5.4Gb/s의 $2^{13}-1$ PRBS 입력데이터를 사용하였다. 실제 PCB 환경의 유사 기생성분을 포함하여 시뮬레이션 한 결과, 10psRMS 클럭 지터 및 $40ps_{p-p}$ 복원된 데이터 지터 특성을 가지고, 1.8V 단일 전원전압으로부터 약 80mW 전력소모를 보인다.

중국 개혁개방 초기 북경호텔의 건축적 특성에 관한 연구 - 1978년부터 1992년까지의 고층호텔 건축사례를 중심으로 - (A Study on the Beijing hotel's Architectural Characteristics of the Early Reform & Opening times in China - Focusing on the cases of high-rise hotels from 1978 until 1992 -)

  • 가오용;김환식;이정수
    • 한국실내디자인학회논문집
    • /
    • 제19권2호
    • /
    • pp.197-205
    • /
    • 2010
  • This study examines for the processes of making a architectural significant issue of 20 cases form of Beijjng's hotel through analyzing the space composition from early the 1950's to 1992 in China. In the methods of analyzing process, We study the literatures, research reports and architectural drawings including the site survey. We hope to establish the principle in morphological characteristics and space composition of Beijing's high-rise hotels through analyzing the plan of these hotels. Finally, We find out the principles after researching. Firstly, Beijing's hotels in China faced on the being difficulties through the process of national development especially in political and economical conditions of country and peoples. Consequently, size of the Beijing's hotel developed with the fact that is complicated from that is single styles focused on the medium-sized one, modernizing popularity and the high-rise hotel buildings appeared plentifully and the form appeared with tall building putting first. Secondly, there are many immanent and interlocking styles in hotel's architectural block plans, many composition styles in big sized hotels, in opposition immanent styles in small sized ones and there are many trend of concourse style in medium sized hotels. To the layout of hotel's room inside of the linear styles are many in big and medium sized hotels.