• Journal of The Korean Society of Grassland and Forage Science
• /
• v.17 no.1
• /
• pp.19-26
• /
• 1997

To find out the residual effect of phosphate fertilization on botanical composition, mineral contents and mineral nutrient deprivation of pasture plants, this experiment was arranged as a randomized complete block design with six treatments(0-0, 50-50, 100-65, 150-65, 200-65 and 250-65kg $P_2O_5$/ha), those were composed of three P,O, fertilization level(0, 50 and 65kg P,OJha) after phosphate fertilization trial with six treatments(0, 50, 100, 150, 200 and 250kg $P_2O_5$/ha) from 1989 to 1992, and conducted at hilly land in Kwangju, Kyonggi Province 60m 1993 to 1994. The results obtained are summarized as follows: The botanical composition of pasture plants without phosphate fertilization was very poor. With increasing available phosphate of soil, the percentage of grasses and legumes were remarkably increased and weeds was decreased. With 150-65kg $P_2O_5$/ha application for two years, the average DM yield was composed of 80.6% grasses, 15.4% legume and 4.0% weeds, the percentage was similar to that of 200-65kg $P_2O_5$/ha. As available phosphate of soil increase, P, K and Mg content of pasture plants were increased, but Ca/P ratio was lowed and the other mineral contents tended not to be regular. The mineral nutrient contents deprived by DM yield was increased as available phosphate of soil was increased, but those were not different between 150-65 and 250-65kg $P_2O_5$/ha. However, mineral nutrient of $P_2O_5$,$K_2O$ and MgO were higher in 200-65 and 250-65kg $P_2O_5$/ha. Most of applied mineral elements were accumulated at a subsurface(0-2.5cm) of grasslands, and mineral tended to be decrease than that of soil chemical analysis before the experiment of residual effect of phosphate fertilization.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.2 no.1
• /
• pp.1-9
• /
• 1999

To find pertinent soil type and maintenance method for artificial planting ground, the effects of soil compositions{sandy loam(S), vermiculite(V), sandy loam+vermiculite+sand(SVS), sandy loam+ carbonized rice husk+sand(SCS), sandy loam+humus sawdust+sand(SHS)}, and fertilizers (organic, chemical) on plant(kentuckyblue grass) growth were measured and compared from the field experiment. The results are summarized as follows 1. the highest germination rate is found from "vermiculite(V)" and the lowest from "sandy loam(S)" among tested 5 soil compositions. 2. "sandy loam+vermiculite+sand(SVS)" composition shows the highest plant height growth effect (5cm growth during tested 3 months) comparing to other 4 compositions. 3. "sandy loam+vermiculite+sand(SYS)" composition shows the highest ground covering rate after first two months, but it concede its order to "sandy loam+humus sawdust+sand(SHS)" composition after next one month growing. 4. the effects of fertilizers are follows 1) Among the blocks where no fertilizer was tried, the predominant height growth was obvious in "sandy loam+carbonized rice husk+sand(SCS)" and "sandy loam+humus sawdust+sand(SHS)" composition. 2) Among the blocks where chemical fertilizer was tried, relatively positive results were found from "vermiculite(V)" and "sandy loam+vermiculite+sand(SYS)" blocks on germination and growth rate. But on the ground coverage ratio, the effect of "sandy loam+carbonized rice husk+sand(SCS)" composite precede that of those 2 composites. 3) Among the blocks where organic fertilizer was tried, "sandy loam+humus sawdust+sand(SHS)" and "vermiculite(V)" blocks show relatively high ground coverage rate, growth rate than others. 4) When compositional differences were not considered, the block where organic fertilizer was tried shows most positive effects on all 3 measurements-germination ratio, height growth and ground covering.

• The Journal of Korean Society for Radiation Therapy
• /
• v.17 no.2
• /
• pp.87-94
• /
• 2005

Purpose : Heavy metal use when producing the block from the workshop. At this time, production of heavy metal dust and fume gives risk in human. This like heavy metal to improve seriousness through measurement and analysis. And by the quest in solution is purpose of this thesis. Materials and Methods : Organization is Inductively Coupled Plasma Atomic Emission Spectrometer, and the object is Deajeon city 4 workshops in university hospital radiation oncology (Bismuth, Lead, Tin and cadmium). Method is the ppb the pumping it does at unit, comparison analysis. And the Calculation heavy metal standard level in air through heavy metal standard level in body and blood, so Heavy metal temporary standard set. Results : Subterranean existence room air quality the administration laws appointed Lead and Cadmium's exposure recommend that it is $3{\mu}g/m^3\;and\;2{\mu}g/m^3$. And Bismuth and Tin decides $7{\mu}g/m^3\;and\;6{\mu}g/m^3$ through standard level in air heavy metal and standard level in body and blood. Heavy metal measurement level of workshops in 4 university hospital Daejeon city compares with work existence and nonexistence. On work nonexistence almost measurement level is below the recommend level. But work existence case express high level. Also consequently in composition ratio of the block is continuous with the detection ratio. Conclusion : Worker's heavy metal contamination imbrued serious for solution founds basic part. In hospital may operation on local air exhauster and periodical efficiency check, protector offer, et al. And worker have a correct understanding part of heavy metal contamination, and have continuous interest, health control. Finally, learned society sphere administer to establishment standard level and periodical measurement. And it founds basic solution plan of periodical special health checkup.

• Restorative Dentistry and Endodontics
• /
• v.32 no.4
• /
• pp.343-355
• /
• 2007

The objectives of this study was to evaluate the durability of 4 resin cements by means of microtensile bond strength test combined with thermocycling method and fractographic FE-SEM analysis. Experimental groups were prepared according to thermocycling (0, 1,000, 5,000) and the kind of resin cements, those were Variolink II, Multilink, Panavia F 2.0, Rely X Unicem. Flat dentin surfaces were created on mid-coronal dentin of extracted third molars. Then fresh dentin surface was grounded with 320-grit silicon carbide abrasive papers to create uniform smear layers. Indirect composite block (Tescera, Bisco Inc., Schaumburg, IL, USA) was fabricated ($12\;{\times}\;12\;{\times}\;6\;mm^3$). It's surface for bonding to tooth was grounded with silicon carbide abrasive papers from 180- to 600-grit serially, then sandblasted witk $20\;-\;50\;{\mu}m$ alumina oxide. According to each manufacturer's instruction, dentin surface was treated and indirect composite block was luted on it using each resin cement. For Rely X Unicem, dentin surface was not treated. The bonded tooth-resin block were stored in distilled water at $37^{\circ}C$ for 24 hours. After thermocycling, the bonded tooth-resin block was sectioned occluso-gingivally to 1.0 mm thick serial slabs using all Isomet slow-speed saw (Isomet, Buehler Ltd, Lake Bluff, IL, USA). These sectioned slabs were further sectioned to $1.0\;{\times}\;1.0\;mm^2$ composite-dentin beams. The specimens were tested with universal testing machine (EZ-Test, Shimadzu, Japan) at a crosshead speed of 1.0 mm/min with maximum load of 500 N. The data was analyzed using one-way ANOVA and Duncan's multiple comparison test at $p\;{\leq}\;0.05$ level. Within the limited results, we conclude as follows; 1. The bond strength of Variolink II was evaluated the highest among experimental groups and was significantly decreased after 1,000 thermocycling (p < 0.05). 2. The bond strength of Multilink was more affected by thermocycling than the other experimental groups and significantly decreased after 1,000 thermocycling (p < 0.05). 3. Panavia F 2.0 and Rely X Unicem showed the gradually decreased tendency of microtensile bond strength according to thermocycling but there was no significant difference (p > 0.05). 4. Adhesive based-resin cements showed lower bond strength with or without thermocycling than composite based-resin cements. 5. Variolink II & Multilink showed high bond strength and mixed failure, which was occurred with a thin layer of luting resin cement before thermocycling and gradually increased adhesive failure along the dentin surface after thermocycling. The bonding performance of resin cement can be affected by application procedure and chemical composition. Composite based-resin cement showed higher bond strength and durability than adhesive based-resin cement.

• Economic and Environmental Geology
• /
• v.50 no.2
• /
• pp.105-116
• /
• 2017

The purpose of this study is to provide the information on genesis of obsidian occurring in the southwestern part of Ulleung Island, Korea, and to discuss its implications for volcanic activity through volcanological and mineralogical properties of obsidian. Obsidian occurs locally at the lower part of the Gombawi welded tuff, showing various complex textures and flow banding. Though obsidian is mostly homogeneous, it is closely associated with alkali feldspar phenocrysts, reddish tuff, and greyish trachyte fragments. The obsidian occurs as wavy, lenticular blocks or lamination composed of fragments. Cooling fractures developed on obsidian glass are characterized by perlitic cracks, orbicular or spherical cracks, indicating that obsidian rapidly quenched to form an amorphous silica-rich phase. It is evident that hydration took place preferentially at the outer rim relative to the core of obsidian, forming alteration rinds. The glassy matrix of obsidian includes euhedral alkali feldspars, diopside, biotite, ilmenite, and iron oxides. Microlites in glassy obsidian are composed mainly of alkali feldspars and ilmenite. Quantitative analysis by EPMA on the obsidian glass part shows trachytic composition with high iron content of 3 wt.%. Accordingly, obsidian formed with complex textures under a rapid cooling condition on surface ground, with slight rheomorphism. Such results might be induced by collapse of lava dome or caldera, which produced the block-and-ash flow deposit and the transportation into valley while keeping high temperatures.

• Journal of Plant Biology
• /
• v.13 no.1
• /
• pp.33-46
• /
• 1970

Pinus densiflora stands are common secondary forest communities on infertile soils in Korea. The stands are results of long severe past biotic pressure such as cutting, burning and grazing. These could be regarded as biotic climax in Korea. Because of their prevalent occurrence, relatively simple species and age composition, and their domestic economic importance, study of their distributional patterns may give some basic knowledge for better utilization of land resources in Korea. To detect distributional patterns and interspecific associations ten pine stands, each of which was homogenious with respect to topography and physiognomy, were subjectively selected from pine stands in Kyunggi Province near Seoul in 1969 and were made object of this study. Four contiguous systematic samples of count for trees, shrubs and seedlings from belt transects were collected from homogeneous areas within ten natural pine stands. The belt transect was 64m or 128m in length, and 1m, 2m or 4m in width. Basic units within the transect ranged from 64 to 256. The data from the contiguous transects were analysed in terms of multiple split-plot experiment. Departure from randomness of stem distribution, i.e., pattern, was tested in terms of variance mean ratio. For the detection of association between species, correlation coefficient was calculated for different block sizes. The values of ${\gamma}$ were tested by the usual t-test. Fine trees within one of the stands showed significant regular distribution through out the blocks. Within other eight stands pines were randomly distributed at basic unit with 4$\times$4m, 2$\times$2m, 2$\times$1m and 1$\times$1m. One significantly clumped distribution at basic unit 2$\times$2m, however, was observed from one of the pine stands. These randomly distributed groups were themselves significantly regularly distributed throughout the blocks for four pine stands. For the other four pine stands, in addition to the random distribution at the basie unit(the primary random group), randomly distributed groups with 32m dimension(the secondary random groups) were also observed. Both the primary and the secondary random groups were significantly regularly distributed at the rest of blocks. Pine seedlings were not distributed randomly thoughout the blocks. Within three of the ten stands they were contagiously distributed. Important shrub species underneath pines such as Querus serrata, Q. acutissima, Leapedeza intermedia, Rhododendron Yedoense var. poukhanenae, Juniperus utilis, Rhododendron mucronulatum var. ciliatum shnwed consistently similar distributional pattern with the pine at each stand. The shrub species pairs; Rhododendron Yedoense var. poukhanenae/Quercus serrata, Rhododendron mucronulatum var. ciliatum/Lespedeza intermedia were significantly negatively associated from 1m to 4m dimensional block sizes but became significantly positively associated from 8m sized blocks on. On the other hand the shrub species pairs; Lespedeza intermedia/Robinia Pseudoacacia, and Lespedeza bicolor var, japonica/Lespedeza intermedia were also significnalty negatively associated from 1m to 8m sized blocks but became significantly positively associated from 16m sized blocks on. The associational pattern between Rhododendron mucronul tun var. poukhanenae and Lespedeza intermedia was not consistent throughout the stands. In some stands negative associations were observed throughout the blocks except NS 32. From these observatons micro-edaphic variation within the pine stands seems not to be great enough to cause distributinal difference of pine trees within the ten pine stands. Among each species and pine seedings, however, the edaphic variation within the pine stands may be great enought to cause distributional variation.

• The Journal of the Petrological Society of Korea
• /
• v.6 no.2
• /
• pp.111-122
• /
• 1997

Provenance type and paleoclimate of the Jinju and Iljig formation were studied on the basis of compositions of sandstones from the western Euiseong area in the northern part of Kyong-sang basin. The average compositions of quartz, feldspar and lithic grain(Q:F:L) from the sandstones are 53:40:7 and 50:46:4 for Jinju and Iljig formations, respectively. The values fall into the arkosic arenite field. Petrographic detrital modes of the sandstones mainly suggest transitional continental block for the tectonic setting of the provenance. All sandstones from the Jinju and IIjig formations show chemical compositions close to average values of arkose(Pettijohn, 1975). $Na_2O$ contents is relatively high. $Fe_2O_3$(total iron) and MgO contents decrease with increasing $SiO_2$ contents since the framework grains of arkoses supposed to be derived from granitic rocks are poor in ferromagnesian minerals. The detrital framework grains still possess climatic signs even though the grains were more or less altered during deep burial. Bivariant plot of Suttner and Dutta(1986) suggests semi-arid to semi-humid paleoclimate during the deposition of the Jinju and Iljig sandstones.

• Journal of The Geomorphological Association of Korea
• /
• v.19 no.3
• /
• pp.23-36
• /
• 2012

This study aims to think about the problem of dolmens: the reasons for the presence of dolmens and how to construct it, at the point of view of geographical and geomorphological. The subjects of this study is the dolmens which locate between at Dogok Hyosanri and Chunyang Daesinri Hwasoon-gun, Jeonlanamdo. The study areas in Hyosanri, Daesinri has been observed as follows. First, the long axis direction of Dolmen upper stone and the slope one are the same. Second, tor, block stream, hockey stick, etc. Third, Composition of the soil silt> sand> clay is distributed in the order. Forth, The soil of high quality silt and the roundness of angular, sub-angular-level and the high frequency, peaks of quarts and illite clay minerals show. Fifth, in the result of $SiO_2/Al_2O_3$, $SiO_2/R_2O_3$, and CIA(Chemical Index of Alteration), Hyosanri, Daesinri areas show mechanical weathering was dominant and chemical weathering environment was not being progressed. The blocks used in construction of dolmens had moved to the bottom of slopes by mass movement such as solifluction then them which had been placed in the position seem to be used by people of Bronze. Based on the above results, the process of construction of dolmens can be estimated as follows. They would dig up the ground under the upper stone of dolmens, put the supporting stone in the place, then dig up earth, place into remains, close the obturating stones, then heal up earth.

• Journal of Animal Science and Technology
• /
• v.63 no.6
• /
• pp.1314-1327
• /
• 2021

Bacillus is characterized by the formation of spores in harsh environments, which makes it suitable for use as a probiotic for feed because of thermostability and high survival rate, even under long-term storage. This study was conducted to investigate the effects of Bacillus-based probiotics on growth performance, nutrient digestibility, intestinal morphology, immune response, and intestinal microbiota of weaned pigs. A total of 40 weaned pigs (7.01 ± 0.86 kg body weight [BW]; 28 d old) were randomly assigned to two treatments (4 pigs/pen; 5 replicates/treatment) in a randomized complete block design (block = BW and sex). The dietary treatment was either a typical nursery diet based on corn and soybean meal (CON) or CON supplemented with 0.01% probiotics containing a mixture of Bacillus subtilis and Bacillus licheniformis (PRO). Fecal samples were collected daily by rectal palpation for the last 3 days after a 4-day adaptation. Blood, ileal digesta, and intestinal tissue samples were collected from one pig in each pen at the respective time points. The PRO group did not affect the feed efficiency, but the average daily gain was significantly improved (p < 0.05). The PRO group showed a trend of improved crude protein digestibility (p < 0.10). The serum transforming growth factor-β1 level tended to be higher (p < 0.10) in the PRO group on days 7 and 14. There was no difference in phylum level of the intestinal microbiota, but there were differences in genus composition and proportions. However, β-diversity analysis showed no statistical differences between the CON and the PRO groups. Taken together, Bacillus-based probiotics had beneficial effects on the growth performance, immune system, and intestinal microbiota of weaned pigs, suggesting that Bacillus can be utilized as a functional probiotic for weaned pigs.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.35 no.5
• /
• pp.393-402
• /
• 1990

Studies to obtain a fundamental data to improve the quantity and quality of wheat protein and to select the excellent breeding materials suitable for various uses of it were performed on the focuses of protein content, amino acid composition, and its related quality. The range of seed protein content of crossing block consisted with 319 varieties or lines was from 9.9% to 17.6% with the average of 13.2%. The minimum protein content was showed by Wonkwang, and the maximum by Chungnamjaerae and Suwon 210. Among the Korean native varieties or breeding lines of crossing block, at least twelve lines or varieties were selected as the high-protein wheats. In the effects of environmental conditions, the variations of protein content by cultivating locations and year were showed out to be up to 3.6%, and 3.3%, respectively. But the varietal characteristics of wheat protein were seemed to remain constantly. In the results of amino acid analysis, those related with bread quality, except proline were improved with the increase of seed protein. But the improvement of nutritional quality did not agree with the protein content increase of seed. The total content of amino acid essential to adults was very low with 266.6-273.3mg per one gram of protein compare to the 350mg (free from the amino acid of tryptophan) recommended by FAO/WHO. Especially the limiting amino acid such as methionine, lysine and threonine were critically deficient. The correlation between protein contents and sedimentation values was obtained r=0.656$\^$**/ of average notwithstanding widly different environmental conditions, and in some condition the value was obained about to r=0.956$\^$**/.