• Journal of Mushroom
• /
• v.21 no.4
• /
• pp.266-269
• /
• 2023

This study aimed to address the increasing demand for technologies preventing mushroom fly damage. By monitoring the annual occurrence patterns of pests over several years and accumulating data, we conducted an analysis to evaluate the efficacy of preventive measures applied before the surge in mushroom fly infestation, typically observed in May. For preemptive control, physical measures involved installing air curtains at cultivation facility entrances and placing sticky traps and insect traps around entry points to block external entry and reduce internal insect density. Additionally, we applied an organic agricultural material, Dalmatian chrysanthemum extract, weekly alongside chemical control measures. To assess the reduction in mushroom fly populations, yellow sticky traps (15×25 cm) were placed at three locations within the mushroom cultivation facility, and the occurrence patterns before and after implementing preventive measures were compared. Compared to conventional practices, the application of preventive techniques resulted in a significant reduction, with a 60% decrease from 15 levels of mushroom flies/m² to 6 levels of mushroom flies/m² in May and a 40% decrease from 10 levels of mushroom flies/m² to 6 levels of mushroom flies/m² in June. While achieving over 50% efficacy during the peak mushroom fly season with preventive measures, we identified complementary actions such as blocking external sources (gaps in cultivation facility doors) and maintaining cleanliness around cultivation facilities (proper disposal of spent substrate) for further improvement. Comprehensive analysis and safety studies, including correlation analysis with contaminants and pathogens, are recommended to ensure the widespread adoption of mushroom fly preventive techniques for safe and stable mushroom production in the agricultural sector.

• Journal of Powder Materials
• /
• v.31 no.2
• /
• pp.169-179
• /
• 2024

Colloidal quantum dot (QDs) have emerged as a crucial building block for LEDs due to their size-tunable emission wavelength, narrow spectral line width, and high quantum efficiency. Tremendous efforts have been dedicated to improving the performance of quantum dot light-emitting diodes (QLEDs) in the past decade, primarily focusing on optimization of device architectures and synthetic procedures for high quality QDs. However, despite these efforts, the commercialization of QLEDs has yet to be realized due to the absence of suitable large-scale patterning technologies for high-resolution devices., This review will focus on the development trends associated with transfer printing, photolithography, and inkjet printing, and aims to provide a brief overview of the fabricated QLED devices. The advancement of various quantum dot patterning methods will lead to the development of not only QLED devices but also solar cells, quantum communication, and quantum computers.

• Smart Media Journal
• /
• v.12 no.11
• /
• pp.48-56
• /
• 2023

The technology of Three-dimensional human posture estimation is used in sports, motion recognition, and special effects of video media. Among various methods for this, multi-view 3D human pose estimation is essential for precise estimation even in complex real-world environments. But Existing models for multi-view 3D human posture estimation have the disadvantage of high order of time complexity as they use 3D feature maps. This paper proposes a method to extend an existing monocular viewpoint multi-frame model based on Transformer with lower time complexity to 3D human posture estimation for multi-viewpoints. To expand to multi-viewpoints our proposed method first generates an 8-dimensional joint coordinate that connects 2-dimensional joint coordinates for 17 joints at 4-vieiwpoints acquired using the 2-dimensional human posture detector, CPN(Cascaded Pyramid Network). This paper then converts them into 17×32 data with patch embedding, and enters the data into a transformer model, finally. Consequently, the MLP(Multi-Layer Perceptron) block that outputs the 3D-human posture simultaneously updates the 3D human posture estimation for 4-viewpoints at every iteration. Compared to Zheng[5]'s method the number of model parameters of the proposed method was 48.9%, MPJPE(Mean Per Joint Position Error) was reduced by 20.6 mm (43.8%) and the average learning time per epoch was more than 20 times faster.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.25 no.4
• /
• pp.60-66
• /
• 2024

This study was undertaken to evaluate the effect of feeding with fiber diets on growth performance in weaned piglets. A total of 240 pigs with an averge weight of 8.69±0.45 kg at 28±2 days of age were allocated into a randomized complete block design (RCBD) with a total of 6 treatments and 5 replications per treatment in the pig barn. The experimental treatments were as follows: 1) Negative control (NC: Basal diet), 2) Positive control (PC: Basal diet+antibiotic), 3) SBP2 (Basal diet+2% sugar beet pulp addition), 4) SBP8 (Basal diet+8%diet+8% sugar beet pulp addition), 5) OH2 (Basal diet+2% sugar beet pulp), and 6) OH8 (Basal diet+8% oat hull addition). The pigs were fed phase I diets for 2 weeks and phase II diets for 3 weeks, with the average daily gain (ADG) and average daily feed intake (ADFI) measured on days 14 and 35. During 2 week the growth performance of the PC treatment, with 0.1% antibiotic addition, showed a significant increase (P<0.05). In 0~5 weeks, the growth performance in the PC treatment was the highest. Treatments with dietary fiber additions exhibited lower daily gains compared to the PC treatment but were higher than the NC treatment. SBP8, with 8% sugar beet pulp addition, showed growth performance comparable to the PC treatment (P<0.05). Additionally, the 8% fiber addition level demonstrated significantly higher daily gains compared to the 2% addition level (P<0.05). The addition of fiber to pig diets resulted in lower growth performance compared to treatments with antibiotic additions. However, the pigs fed SBP8 showed growth performance equivalent to those in the PC treatment, suggesting the potential of sugar beet pulp as a substitute for antibiotics in pig feed. The growth attributed to sugar beet pulp addition in the feed is speculated to occur while the immature gut of the pigs is developing and due to the positive influence of sugar beet pulp's fiber source on the gut environment.

• Journal of Internet Computing and Services
• /
• v.25 no.1
• /
• pp.29-37
• /
• 2024

In this paper, we propose an efficient image processing system to detect and track the movement of specific objects such as patients. The proposed system extracts the outline area of an object from a binarized difference image by applying a thinning algorithm that enables more precise detection compared to previous algorithms and is advantageous for mixed-mode design. The binarization and thinning steps, which require a lot of computation, are designed based on RTL (Register Transfer Level) and replaced with optimized hardware blocks through logic circuit synthesis. The designed binarization and thinning block was synthesized into a logic circuit using the standard 180n CMOS library and its operation was verified through simulation. To compare software-based performance, performance analysis of binary and thinning operations was also performed by applying sample images with 640 × 360 resolution in a 32-bit FPGA embedded system environment. As a result of verification, it was confirmed that the mixed-mode design can improve the processing speed by 93.8% in the binary and thinning stages compared to the previous software-only processing speed. The proposed mixed-mode system for object recognition is expected to be able to efficiently monitor patient movements even in an edge computing environment where artificial intelligence networks are not applied.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.24 no.1
• /
• pp.47-56
• /
• 2024

Background: Among the various pain-related diseases that can be encountered at the clinic, there is a neuropathic pain that is difficult to treat. Numerous methods have been proposed to treat neuropathic pain, such as taking medication, nerve block with lidocaine, or neurolysis with alcohol or phenol. Recently, a method of perineural injection using dextrose instead of lidocaine was proposed. This study was designed to compare the effects of perineural injection therapy (PIT) with buffered 5% dextrose or 0.5% lidocaine on neuropathic pain. Methods: The data were collected from the database of pain clinic from August 1st, 2019 to December 31st, 2022 without any personal information. The inclusion criteria were patients diagnosed with postherpetic neuralgia (PHN), trigeminal neuralgia (TN), complex regional pain syndrome (CRPS), or peripheral neuropathy (PN), and patients who had undergone PIT with buffered 5% dextrose (Dextrose group) or 0.5% lidocaine (Lidocaine group) for pain control. The data of patients, namely sex, age, and pain score (numerical rating scale, NRS) were collected before PIT. The data of NRS, side effects, and satisfaction grade (excellent, good, fair, or poor) were collected one week after each of the four PIT, and two weeks after the last PIT. Results: Overall, 112 subjects were enrolled. The Dextrose group included 89 and Lidocaine group included 23 patients. Because the number of patients in the Lidocaine group was too small to allow statistical analysis, the trend in Lidocaine group was just observed in each disease. There were no significant side effects except for a few bruise cases on the site of injection in all groups. The NRS in most Dextrose groups except CRPS were reduced significantly; however, the Lidocaine group showed a trend of pain reduction only in PHN. The Dextrose group except CRPS showed increased satisfaction two weeks after the final PIT. Conclusion: From the results, it is suggested that PIT with buffered 5% dextrose may have a good effect for neuropathic pain without any side effect except for patients with CRPS. This may offer a window into a new tool that practitioners can employ in their quest to help patients with neuropathic pain.

• Journal of Animal Science and Technology
• /
• v.66 no.1
• /
• pp.145-155
• /
• 2024

This study was conducted to determine the effects of amino acid (AA) supplementation in low-protein (LP) diets on growth performance and nitrogen (N) excretion. A total of 175 7-day-old Ross 308 male broilers, with a mean body weight (BW) of 165 g (standard deviation = 11.2 g), were grouped into five blocks by BW and allocated to seven treatments according to a randomized complete block design with five replicate cages at five birds per cage. Dietary treatments comprised a control diet containing 20.0% crude protein (CP) and six LP diets containing either 18.5% or 17.0% CP. These LP diets were supplemented with either no AA supplementation, indispensable AA, or both indispensable and dispensable AA (glutamic acid and glycine). Birds were fed experimental grower diets from day 7 to 21 and then commercial finisher diets until day 28. During the grower period (day 7 to 21), birds fed LP diets supplemented with indispensable AA exhibited greater (p < 0.05) BW, body weight gain (BWG), feed intake (FI), and gain-to-feed ratio (G:F) than birds fed LP diets without crystalline AA and were comparable to birds fed the control diet. During the finisher period (day 21 to 28), birds fed LP diets supplemented with indispensable AA showed greater (p < 0.05) BW than birds fed LP diets without crystalline AA, and their growth performance was comparable to birds fed the control diet. Throughout the overall period, supplementing indispensable AA in LP diets resulted in elevated (p < 0.05) BWG, FI, and G:F more than those of LP diets without crystalline AA and were comparable to those of the control diet. Supplementing indispensable AA in LP diets decreased amount and coefficient of N excretion as much as the control diet. Dispensable AA supplementation in LP diets did not influence growth performance and N excretion. In conclusion, supplementing indispensable AA in LP diets maintains growth performance and N excretion until the dietary CP lowers from 20.0% to 17.0% during the grower period. As long as dietary CP is above 17.0%, dispensable AA may not be deficient in LP diets during the grower period.

• Tunnel and Underground Space
• /
• v.34 no.2
• /
• pp.89-103
• /
• 2024

In the disposal environment, gases can be generated at the interface between canister and buffer due to various factors such as anaerobic corrosion, radiolysis, and microbial degradation. If the gas generation rate exceeds the diffusion rate, the gas within the buffer may compress, resulting in physical damage to the buffer due to the increased pore pressure. In particular, the rapid movement of gases, known as gas breakthroughs, through the dilatancy pathway formed during this process may lead to releasing radionuclide. Therefore, understanding these gas generation and movement mechanism is essential for the safety assessment of the disposal systems. In this study, an experimental apparatus for investigating gas migration within buffer was constructed based on a literature review. Subsequently, a gas injection experiment was conducted on a compacted bentonite block made of Bentonile WRK (Clariant Ltd.) powder. The results clearly demonstrated a sharp increase in stress and pressure typically observed at the onset of gas breakthrough within the buffer. Additionally, the range of stresses induced by the swelling phenomenon of the buffer, was 4.7 to 9.1 MPa. The apparent gas entry pressure was determined to be approximately 7.8 MPa. The equipment established in this study is expected to be utilized for various experiments aimed at building a database on the initial properties of buffer and the conditions during gas injection, contributing to understanding the gas migration phenomena.

• Information Systems Review
• /
• v.21 no.2
• /
• pp.117-137
• /
• 2019

In the Big Data era, data science has become popular with the production of numerous data in various domains, and the power of data has become a competitive power. There is a growing interest in unstructured data, which accounts for more than 80% of the world's data. Along with the everyday use of social media, most of the unstructured data is in the form of text data and plays an important role in various areas such as marketing, finance, and distribution. However, text mining using social media is difficult to access and difficult to use compared to data mining using numerical data. Thus, this study aims to develop Korean Natural Language Application (KoALA) as an integrated application for easy and handy social media text mining without relying on programming language or high-level hardware or solution. KoALA is a specialized application for social media text mining. It is an integrated application that can analyze both Korean and English. KoALA handles the entire process from data collection to preprocessing, analysis and visualization. This paper describes the process of designing, implementing, and applying KoALA applications using the design science methodology. Lastly, we will discuss practical use of KoALA through a block-chain business case. Through this paper, we hope to popularize social media text mining and utilize it for practical and academic use in various domains.

• Korean Journal of Radiology
• /
• v.22 no.2
• /
• pp.179-188
• /
• 2021

Objective: This study aimed to prospectively compare the efficacy, safety, and mid-term outcomes of dual-switching monopolar (DSM) radiofrequency ablation (RFA) to those of conventional single-switching monopolar (SSM) RFA in the treatment of hepatocellular carcinoma (HCC). Materials and Methods: This single-center, two-arm, parallel-group, randomized controlled study was approved by the Institutional Review Board. Written informed consent was obtained from all patients upon enrollment. A total of 80 patients with 94 HCC nodules were randomized into either the DSM-RFA group or SSM-RFA group in a 1:1 ratio, using a blocked randomization method (block size 2). The primary endpoint was the minimum diameter of the ablation zone per unit time. The secondary endpoints included other technical parameters, complication rate, technique efficacy, and 2-year clinical outcomes. Results: Significantly higher ablation energy per unit time was delivered to the DSM-RFA group than to the SSM-RFA group (1.7 ± 0.2 kcal/min vs. 1.2 ± 0.3 kcal/min; p < 0.001). However, no significant differences were observed between the two groups for the analyzed variables, including primary endpoint, regarding size of the ablation zone and ablation time. Major complication rates were 4.9% in the DSM-RFA group and 2.6% in the SSM-RFA group (p = 1.000). The 2-year local tumor progression (LTP) rates of the HCC nodules treated using DSM-RFA and SSM-RFA were 8.5% and 4.7%, respectively (p = 0.316). The 2-year LTP-free survival rates of patients in the DSM-RFA and SSM-RFA groups were 90.0% and 94.4%, respectively (p = 0.331), and the 2-year recurrence-free survival rates were 54.9% and 75.7%, respectively (p = 0.265). Conclusion: Although DSM-RFA using a separable clustered electrode delivers higher ablation energy than SSM-RFA, its effectiveness failed to show superiority over SSM-RFA in the treatment of HCC.