• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.2
• /
• pp.430-439
• /
• 2004

This paper describes a design of 8192/2048-point FFT/IFFT processor (CFFT8k2k), which performs multi-carrier modulation/demodulation in OFDM-based DVB-T receiver. Since a large size FFT requires a large buffer memory, two design techniques are considered to achieve memory-efficient implementation of 8192-point FFT/IFFT. A hybrid structure, which is composed of radix-4 single-path delay feedback (R4SDF) and radix-4 single-path delay commutator (R4SDC), reduces its memory by 20% compared to R4SDC structure. In addition, a memory reduction of about 24% is achieved by a novel two-step convergent block floating-point scaling. As a result, it requires only 57% of memory used in conventional design, reducing chip area and power consumption. The CFFT8k2k core is designed in Verilog-HDL, and has about 102,000 Bates, RAM of 292k bits, and ROM of 39k bits. Using gate-level netlist with SDF which is synthesized using a $0.25-{\um}m$ CMOS library, timing simulation show that it can safely operate with 50-MHz clock at 2.5-V supply, resulting that a 8192-point FFT/IFFT can be computed every 164-${\mu}\textrm{s}$. The functionality of the core is fully verified by FPGA implementation, and the average SQNR of 60-㏈ is achieved.

• Journal of Practical Engineering Education
• /
• v.8 no.2
• /
• pp.111-120
• /
• 2016

Education equipment for field programmable gate array (FPGA) design of sensor-based IOT (Internet Of Thing) system is introduced. Because sensors have different interfaces, several types of interface controller on FPGA need. Using this equipment, several types of interface controller, which can control ADC (analog-to-digital converter) for analog sensor outputs and $I^2C$ (Inter-Integrated Circuit), SPI (Serial Peripheral Interface Bus), and GPIO (General-Purpose Input/Output) for digital sensor outputs, can be designed on FPGA. Image processing hardware using image sensors and display controller for real and image-processed images or videos can be design on FPGA chip. This equipment can design a SOC (System On Chip) consisting of a hard process core on Linux OS and a FPGA block for IOT system which can communicate with wire and wireless networks. Using the education equipment, an example of hardware design using image sensor and accelerometer is described, and an example of syllabus for "Digital system design using FPGA" course is introduced. Using the education equipment, students can develop the ability to design some hardware, and to train the ability for the creative capstone design through conceptual, partial-level, and detail designs.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.1
• /
• pp.120-130
• /
• 2012

As long span and complex bridges are constructed often recently, safety estimation became a big issue. Various types of measuring instruments are installed in case of long span bridge. New wireless technologies for long span bridges such as sending information through a gateway at the field or sending it through cables by signal processing the sensing data are applied these days. However, The case of occurred accidents related to bridge in the world have been reported that serious accidents occur due to lack of real-time proactive, intelligent action based on recognition accidents. To solve this problem in this study, the idea of "communication among things", which is the basic method of RFID/USN technology, is applied to the bridge monitoring system. A sensor node module for USN based intelligent bridge system in which sensor are utilized on the bridge and communicates interactively to prevent accidents when it captures the alert signals and urgent events, sends RF wireless signal to the nearest traffic signal to block the traffic and prevent massive accidents, is designed and tested by performing TinyOS based middleware design and sensor test free Space trans-receiving distance.

• Restorative Dentistry and Endodontics
• /
• v.25 no.1
• /
• pp.1-16
• /
• 2000

It is difficult to treat the endodontic apical perforation successfully. In this study, we hypothesized that the application of PDGF-BB and IGF-I into periapical perforation site may accelerate periapical healing and lead to bone deposition. And the specificity of osteonectin in periapical healing was investigated. The experiments were performed on the upper and lower 51 premolar teeth of 4 beagle dogs. The pulp chamber of each tooth was opened and the dental plaque was inserted into the canal for developing the periapical lesion for 5 weeks. Then, the roots were artificially perforated at the apex with the number 4 profile of .06 taper. In each step, standard periapical radiographs were taken to compare the size of lesion each other. The radiographs were scanned and analyzed by image analysis system. The mean and standard deviation of periradicular radiolucency ratios were calculated in each group. ANOVA was used for comparison. 51 premolars were grouped into 3 groups; control group, calcium hydroxide-treated group and calcium hydroxide plus growth factors-treated group. In the control group, the apical perforations were not sealed and obturated with gutta-percha and ZOE sealer by lateral condensation technique. In the experimental groups, the apical perforation were sealed with calcium hydroxide and with/without $4{\mu}g$ of PDGF-BB & IGF-I in cellulose gel and obturated by lateral condensation technique. Fluorescent bone markers were used to measure new bone formation. Following 2, 4, 12 weeks after experiment the dogs were sacrificed and histologic sections were prepared. Each tooth block including periapical lesion was sectioned mesiodistally. One half of the sections were decalcified with 6% nitric acid and processed by standard paraffin embedding technique. The sections were stained by hematoxylin and eosin, and immunostained for osteonectin. Histomorphometrical measurement of neoformed bone was performed using a light microscope. And the other half of the sections were prepared by undecalcified preparation, and confocal laser scanning microscopic investigations were done.

• Journal of KIISE:Computer Systems and Theory
• /
• v.30 no.5_6
• /
• pp.232-238
• /
• 2003

Traditional operating systems use a virtual memory to provide users with a bigger memory than a physical memory. The virtual memory augments the insufficient physical memory by the swap device. Since disks are usually used as the swap device, the cost of a page fault is relatively high compared to the access cost of the physical memory. Recently, numerous papers have investigated the Network RAM in order to exploit the idle memory in the network instead of disks. Since today's distributed systems are interconnected with high-performance networks, the network latency is far smaller than the disk access latency In this paper we design and implement the Network RAM using block device driver on Linux. This is the first implementation of the Network RAM on Linux. We propose the new reliability method to recover the page when the other workstation's memory is damaged. The system using the Network RAM as the swap device reduces the execution time by 40.3% than the system using the disk as the swap device. The performance results suggest that the new reliability method that use the processor more efficiently has the similar execution time with others, but uses smaller server memory and generates less message traffic than others.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.2
• /
• pp.793-800
• /
• 2014

The purpose of this study is to analyze the perception and need of the early childhood education field on authentication of teaching materials and implements for young children. To achieve this, a survey was carried out on 350 teachers and directors in Daejeon-based kindergartens and child-care centers from September 21 to September 30, 2013. The results of the analysis are as follows. First, 59.4% of them thought that it needed the evaluation authentication of teaching materials and implements for young children. 32.9% of them had a high perception of the early childhood education field. 39.4% of them had high need of the early childhood education field. And 45.1% of them expected a high effect of introducing the evaluation authentication system of teaching materials and implements for young children. Second, most of them had the highest need of the evaluation authentication of teaching materials and implements for young children in terms of education, followed by function and field. And most of them placed the highest emphasis on social development, safety and language in terms of education, function and field, respectively. Consequently, the use of teaching materials and implements, which the social development and safety in terms of education and function are respectively evaluated and authenticated by the diversity of teaching materials and implements for young children, has need of the high evaluation and authentication of teaching materials and implements that can guarantee the quality when young children use a lot of experiment and observation implements such as block play, reading materials, manipulating materials, making implements.

• The KIPS Transactions:PartA
• /
• v.14A no.3 s.107
• /
• pp.173-184
• /
• 2007

Garbage collection in the Java virtual machine is a core function that relieves application programmers of difficulties related to memory management. In this paper, we evaluate and analyze the performance of GenGC and GenRGC, garbage collectors for embedded Java virtual machines. For performance evaluation, we employ CVM, a real embedded Java virtual machine developed by Sun Microsystems, Inc., as a platform and also use a widely-used SpecJVM98 as a set of benchmark programs. To compare the performance of GenGC and GenRGC, we first evaluate the time of garbage collection and the delay time caused by garbage collection. Second, for more detailed performance analysis of GenRGC, we evaluate the time of garbage collection and the delay time caused by garbage collection while changing the sizes of a block and a frame. Third, we analyze the size of storage space required for performing GenRGC, and show GenRGC to be suitable for embedded environment with a limited mont of memory. Since CVM is the most representative one of embedded Java virtual machines, this performance study is quite meaningful in that we can predict the performance of garbage collectors in real application environments more accurately.

• KIPS Transactions on Software and Data Engineering
• /
• v.5 no.2
• /
• pp.107-116
• /
• 2016

Industrial robots have been usually controlled using text-based programming languages provided by each manufacturer with its button-based TP(Teaching Pendent) terminal. Unfortunately, when we consider that people who manipulate TPs in manufacturing sites are mostly unskilled with no background knowledge about computer programming, these text-based programming languages using button-based interaction on manufacturing sites are too difficult for them to learn and use. In order to overcome the weaknesses of the text-based programming language, we propose a visual programming language that can be easily used on gesture-enabled devices. Especially, in our visual programming environment, each command is represented as a block and robots are controlled by stacking those blocks using drag-and-drop gestures, which is easily learnable even by beginners. In this paper, we utilize a widely-spread device, Tablet PC as the gesture-enabled TP. Considering that Tablet PC has limited display space in contrast to PC environments, we designed different kinds of sets of command blocks and conducted user tests. Based on the experiment results, we propose an effective set of command blocks for Tablet PC environment.

• The KIPS Transactions:PartD
• /
• v.12D no.5 s.101
• /
• pp.797-806
• /
• 2005

The objective of the In-h(High Level Architecture) have recommended by DoD(Department of Defense) is to facilitate interoperability among simulations and to promote reuse of their components. There are many legacy simulation softwares developed before the HLA becomes simulation standard. The integration of legacy simulations into federations using the HLA is an important research topic in M&S(Modeling and Simulation) area. Legacy simulation softwares of the mission critical industry such as nuclear and aerospace are generally use Fortran language. However, the reuse of those is not easy because the HLA is not support Fortran language. This paper suggests a integration method which minimizes the modification of legacy simulation software and migrates the legacy simulation software to HLA federation. Each federate participating in federation have the separated executables that communicate via a shared memory created at run-time. Two types of shared memory blocks are used for publication and subscription. Declaration block for global variables used in legacy simulation software is separated for publication and subscription and then mapped as classes of objects and interactions for the HLA FOM design. To validate the suggested method, we approached the HLA integration of legacy nuclear simulation code being used in plant design and to observe the integration results, we used the FMT(Federation Management Tool). The diagnostic information which the FTM displays showed that our method can be successfully and effectively used for a HLA federation.

• The KIPS Transactions:PartB
• /
• v.13B no.2 s.105
• /
• pp.163-170
• /
• 2006

With rapidly developing Internet applications, an e-mail has been considered as one of the most popular methods for exchanging information. The e-mail, however, has a serious problem that users ran receive a lot of unwanted e-mails, what we called, spam mails, which cause big problems economically as well as socially. In order to block and filter out the spam mails, many researchers and companies have performed many sorts of research on spam filtering. In general, users of e-mail have different criteria on deciding if an e-mail is spam or not. Furthermore, in e-mail client systems, users do different actions according to a spam mail or not. In this paper, we propose a mail filtering system using such user actions. The proposed system consists of two steps: One is an action inference step to draw user actions from an e-mail and the other is a mail classification step to decide if the e-mail is spam or not. All the two steps use incremental learning, of which an algorithm is IB2 of TiMBL. To evaluate the proposed system, we collect 12,000 mails of 12 persons. The accuracy is $81{\sim}93%$ according to each person. The proposed system outperforms, at about 14% on the average, a system that does not use any information about user actions.