• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.4
• /
• pp.124-131
• /
• 2017

The purpose of this study is to evaluate the basic performance of cement mortar for repair using alumina cement and nitrite can be cured in low temperature environment. For this purpose, the repair mortar used in the domestic construction site was selected and the experimental evaluation was carried out by adjusting the mixing amount by substituting alumina cement and nitrite for the blending ratio. The experimental test results confirmed that alumina cement and nitrite were replaced with the repair mortar, the initial strength was improved. Also, the chemical resistance was improved, the shrinkage behavior was decreased, and the resistance to freezing and thawing was increased. As a result, applying alumina cement and nitrite at a ratio of 2:1 at 7.5%, the surface condition was maintained for 5 months or longer and it was judged to be excellent in practical use for external structures.

• Journal of Power System Engineering
• /
• v.20 no.2
• /
• pp.51-57
• /
• 2016

Non-esterified biodiesel fuel is cheaper than esterified that because of a simple manufacturing process that only consists of filtering. Applicability of this on diesel engine with electronic control system was accomplished, then optimization adopting a fractional factorial design and response surface methodology was carried out at 25% and 50% of engine load in this study. Pressure of common rail and injection timing mainly effected on responses as specific fuel oil consumption and nitrogen oxides regardless of engine load. Estimations were 310.3 g/kWh of specific fuel oil consumption and 237 ppm of nitrogen oxides at 25% load, and 233.2 g/kWh of specific fuel oil consumption and 730 ppm of nitrogen oxides at 50% load. Tests to verify these estimations were accomplished and as the results, specific fuel oil consumption was 300.4 g/kWh and NOx was 277 ppm at 25% load and 236.8 g/kWh and 573 ppm at 50% load.

• Applied Chemistry for Engineering
• /
• v.4 no.1
• /
• pp.54-63
• /
• 1993

Some emulsified 1, 2-disubstituted imidazolinium salts were synthesized by quaternization of 1, 2-disubstituted imidazoline which had been prepared by the reaction of dodecanoic acid with tetraethylenepentamine. 2-Docosamido-2'-docosanoyloxydiethylamine was prepared by the reaction of docosanoic acid with hydroxylethylethylenediamine. Then, some emulsified fatty carbamide salts were also synthesized by quaternization of fatty carbamide which had been prepared by the reaction of urea with the 2-docosamido-2'-docosanoyloxydiethylamine. Some softners were prepared by blending of these salts mentioned above. These softners were treated on acrylic fiber, then several properties were measured. As the results, softening and lubricating properties are good and a little antistatic property was observed. The synthesized softners were also proved as a durable softner by means of the several experiments : bending resistance test and measurements of feeling change with washing according to the pH changes. The surface structure of acrylic fibers treated with the softner were characterized by SEM.

• Fashion & Textile Research Journal
• /
• v.15 no.5
• /
• pp.682-693
• /
• 2013

Camouflage is evaluated by scientific principle in the fields of biology, military science, and art. It has a strong influence on contemporary fashion and means exposure with concealment. This study analyzed the visual characteristics of camouflage patterns in fashion design through documentaries and fashion photos. The fashion design results areas follow. The simple blending of a disruptive motif indicated an inaccurate repetition of a disruptive motif, the discontinuous or continuous connection of disruptive motif, the irregular repetition of a disruptive animal silhouette, the collage of a different disruptive motif, the craft of a disruptive motif and the intensive color match of a disruptive motif. It represented the maximization of complication, fantastic and fanciness. The overlap of a disruptive motif showed the overlap of disruptive print patterns with transparency and an overlap of different fabrics with a disruptive pattern. It represented spatial relationships of three dimensions as well as the maximization of visual illusion and the reinforcement of attractiveness. The blurring of a disruptive motif showed the pointage of disruptive motif, the pointage of image, value gradation, the whole blurring of a disruptive pattern cluster and stained appearance. It represented the obscurity of motif form, the uncertainty of object and double meaning. The trompe l'oeil of a partial background object showed the realistic and the painterly imitation of color and texture for partial objects through a close-up. It represented amazement and pleasure by illusion, scarcity and the decoration of surface and synecdochical remind. In conclusion, camouflage in fashion was weakened and modified from a classical military context by a unique expression of various motifs.

• Culinary science and hospitality research
• /
• v.7 no.2
• /
• pp.181-194
• /
• 2001

Dried noodles was manufactured by wheat flour and saline solution mixture. At this time, saline solution mixture was used for simple saline solution and mixture(blending ratio of PNSO and emulsifier=2:1, w/w) of both pine needle seasoning oil (PNSO) manufactured by autoclaving method and food emulsifier. Water absorption ratio, volume expansion ratio and water soluble solid matters content were decreased, but cooking time was prolonged, respectively. According to, suitable treating amount of PNSO was 2-3%(w/w) level. On organoleptic test, the peculiar green color was appeared in cooked noodles of PNSO treating groups. The surface was slickly, chewy rheology and texture were improved at PNSO treating cooked noodle. During 20-30 minutes after cooking, chewy characteristics was maintained the treating groups more than PNSO 2%(w/w). At the result, this PNSO treatin dried noodle samples were suitable at the institutional food service as well as dining hal1 for the case of large scale's kitchen work.

• Polymer(Korea)
• /
• v.28 no.5
• /
• pp.374-381
• /
• 2004

Gas permeability of low density polyethylene (LDPE) film containing zeolite powder for $CO_2,\;O_2$ and $N_2$ were investigated. Zeolite powders modified by cations or surfactant were compounded with LDPE to produce $20 wt\%$ masterbatch. After blending the masterbatch with LDPE, zeolite filled films were prepared by the blown film process. Finally, the composite films containing zeolite loadings of 0, 3,5, and $10 wt\%$ were produced. A gas permeability apparatus based on the variable volume principle was designed to analyze the characteristics of films. Experiments showed a general trend that gas permeabilities first decreased and then increased as the zeolite content was increased. Surfactant modified zeolite showed a better interfacial adhesion with the matrix, but the film did not show a discernible difference in gas permeability compared with the other modified films. The difference of temperature dependences in the gas permeabilities of composite films was slightly smaller than that of LDPE film.

• Bulletin of the Korean Chemical Society
• /
• v.2 no.4
• /
• pp.142-147
• /
• 1981

A blend polymeric system composed of poly(methyl methacrylate) (PMMA or PM) and polystyrene (PS) dissolved in chloroform was rheologically studied. The viscosities ${\eta}_{bl}$ of the blend system with various blending ratios ${\chi}$ changing from zero (pure PS solution) to unity (pure PMMA solution) were measured at $25{\circ}C$ as a function of shear rates ${\dot{s}}$ by using a Couette type viscometer. ${\eta}_{bl}$ at a given ${\dot{s}}$ decreased exponentially with ${\chi}$ reaching asymptotic constant value of ${\eta}_{bl}$ ; ${\eta}_{bl}$ at a given ${\chi}$ is greater at a smaller ${\dot{s}}$. These results are explained by using Ree-Erying's theory of viscosity, ${\eta}_{bl}=(x_1{\beta}_1/{\alpha}_1)_{b}_1＋ (x_2{\beta}_2/{\alpha}_2)_{bl}[sinh^{-1}{\beta}_2(bl) {\dot{s}}]/{\beta}_2(bl){\dot{s}}$. The Gibbs activation energy ${\Delta}G_i^\neq$(i = 2 for non-Newtonian units) entering into the intrinsic relaxation time ${\beta}$ is represented by a linear combination ${\Delta}G_i^\neq(bl) ={\chi}{\Delta}G_i^{\neq}_{iPM}+(1-{\chi}){\Delta}G_i^{\neq}_{iPS}$;the intrinsic shear modulus$[[\alpha}_i]^{-1}$ is also represented by $[{\alpha}_i(bl)]^{-1}={\chi}[{\alpha}_{iPM}]^{-1}+(1-{\chi})[{\alpha}_{iPS}]^{-1}$ and the fraction of area on a shear surface occupied by the ith flow units $x_i(bl)$ is similarly represented, i.e., $x_i(bl) = {\chi}x_{iPM}+(1-{\chi})x_{iPS}$. By using these ideas the Ree-Eyring equation was rewritten which explained the experimental results satisfactorily.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.55 no.3
• /
• pp.284-293
• /
• 2022

In this study, we aimed to optimize the blending conditions of sunflower oil (A), water (B), and oriental sauce (C) for canned smoked oysters Crassostrea gigas in oriental sauce (SOO). Using response surface methodology (RSM), we found that the optimal independent variables [X₁, A/(B+C); X₂, B/C] based on the salinity (Y₁) amino acid nitrogen content (Y₂), and overall acceptance (Y₃) of high-quality SOO were 48.7% (w/w) for sunflower oil, 25.5% (w/w) for water, and 25.8% (w/w) for oriental sauce. Under optimal conditions, the experimental values of Y₁, Y₂, and Y₃ were 1.68±0.4 g/100 g, 155.4±2.4 mg/100 g, 6.2±0.23 score, respectively, which were not significantly different from the predicted values (P<0.05). The SOO prepared under optimal conditions had a higher overall acceptance than commercial canned smoked oysters. These results suggest that developing canned smoked oysters in oriental sauce can be industrialized, and the product is predicted to be competitive in the global market.

• Journal of the Korea Institute of Building Construction
• /
• v.22 no.4
• /
• pp.337-345
• /
• 2022

The foundation of high-rise concrete building in coastal areas generally must be installed in an integrated manner, not separately, in order to prevent defects caused by stress on the upper and lower parts of the mounting surface and to manage the process smoothly. However, when performing integrated punching, there is a concern that temperature stress cracks may occur due to hydration heat. Due to the large member size, it is difficult to make a sufficient commitment, so it is necessary to mix concrete with high self-charging properties to ensure workability. In this research, the amount of high-performance spray and admixture used was adjusted as experimental variables to satisfy this required performance. Through the analysis of the results for each blending variable, it was found that the unit quantity was 155kg/m³ and the cement ratio in the binder was 18%, and the target values of the pre-concrete properties and compressive strength were satisfied. A four-component binder(18% cement, 50% slag fine powder, 27% fly ash, 5% silica fume) was used.

• Food Science of Animal Resources
• /
• v.43 no.1
• /
• pp.73-84
• /
• 2023

Campylobacteriosis is a common cause of gastrointestinal disease. In this study, we suggest a general strategy of applying gold nanoparticles (AuNPs) in colorimetric biosensors to detect Campylobacter in chicken carcass. Polymerase chain reaction (PCR) was utilized for the amplification of the target genes, and the thiolated PCR products were collected. Following the blending of colloid AuNPs with PCR products, the thiol bound to the surface of AuNPs, forming AuNP-PCR products. The PCR products had a sufficient negative charge, which enabled AuNPs to maintain a dispersed formation under electrostatic repulsion. This platform presented a color change as AuNPs aggregate. It did not need additional time and optimization of pH for PCR amplicons to adhere to the AuNPs. The specificity of AuNPs of modified primer pairs for mapA from Campylobacter jejuni and ceuE from Campylobacter coli was activated perfectly (C. jejuni, p-value: 0.0085; C. coli, p-value: 0.0239) when compared to Salmonella Enteritidis and Escherichia coli as non-Campylobacter species. Likewise, C. jejuni was successfully detected from artificially contaminated chicken carcass samples. According to the sensitivity test, at least 15 ng/μL of Campylobacter PCR products or 1×10³ CFU/mL of cells in the broth was needed for the detection using the optical method.